BD125X/1 / Bowie & Dick Test Pack Chemical Indicator with warning sheet designed for testing air removal efficiency of vacuum-assisted steam sterilizers. 100 % Lead Free. Bowie-Dick Test Pack is designed for testing air removal efficiency of dynamic-air-removal steam sterilizers operating at 132 °C for 4 minutes and at 134 °C for 3.5 minutes. Characteristics: Type 2 Chemical Indicator Equivalent in performance to the ANSI/AAMI ST79 Bowie-Dick Towel Pack. Detects residual air in the sterilizer chamber due to air leaks, air removal failures or steam quality. Holds an early warning sheet designed for early detection of air removal failures before they appear on the test sheet. Initial Color: yellow Final Color: dark brown/black (should change homogeneously in the whole sheet) Size: 16 mm x 125 mm x 113 mm Assembly: 1 impermeable barrier – 1 Foam – permeable barriers – 1 Glassine paper – 1 Test Sheet – permeable barriers – 1 Glassine paper – 1 Warning Sheet – permeable barriers – 1 impermeable barrier. Wrapped with crepe paper. Instructions For Use: 1. Run a warm-up cycle to properly heat the sterilizer. 2. Place the Bowie-Dick Test Pack horizontally with the label facing up in an empty vacuum-assisted sterilizer chamber, in the bottom/front of the sterilizer rack and over the drain. The Test Pack should read “THIS SIDE UP” when placed correctly. 3. Run the sterilizer cycle for 3.5 min. – 134 ºC / 4 min. – 132 °C. 4. Remove the test pack from sterilizer and allow it to cool down. Check color change of type 1 indicator on the label. 5. Unwrapped the pack and remove the test and warning sheets. Check them for color change and record the results. Specifications: Process: Steam Initial Color: Yellow Final Color: Black, Dark Brown Indicator Type: Type 2 chemical indicator Regulations: ISO 11140-1, ISO 11140-5  More Info About This Product: Color chart

Read more less

MINIBIO / Auto-reader Incubator for Biological Indicators with 3 positions and built-in printer. For incubation and readout of: Bionova® Rapid Fluorescence Readout Biological Indicators: BT220 (Steam): 3 hs. at 60 ºC, BT221 (Steam): 1 h. at 60 ºC, BT110 (EO): 4 hs. at 37 ºC, BT102 (Formaldehyde): 2 hs. at 60ºC, BT95 (VH2O2): 2 hs. at 60ºC. Bionova® Super Rapid Fluorescence Readout Biological Indicators: BT222 (Steam): 1 h. at 60 ºC, BT223 (Steam): 30 min. at 60 ºC, BT96 (VH2O2): 30 min. at 60ºC. Bionova® Ultra Rapid Fluorescence Readout Biological Indicators: BT224 (Steam): 20 min. at 60ºC. Characteristics: 3 metal positions (38 mm deep, 9 mm diameter) to incubate Rapid/Super Rapid/Ultra Rapid Fluorescence Readout Self-contained biological indicators. 1 ampoule crusher. Special hole for external thermometer. Incorporated top cap. Dual Temperature System: Allows selecting between two different incubation temperatures (37ºC and 60ºC) USB connection for registering results in a PC through Reading and Traceability Software. Allows incubating 3 indicators simultaneously, in different incubation times, at the same temperature. Thermal Printer to record results. Sound alarm for event indication Detection and automatic cancellation of the fluorescence reading of the biological indicator. Specifications: Fluorescence Reading Wavelength: ~ 460 nm Firmware Update By The User. Dimensions: 180 mm High, 154 mm wide and 105 mm deep. Voltage Range: 100 €“ 240 V AC Power: 28 W Frequency: 50-60 Hz Operating Specifications: Input 100/240V 0.2A (50/60Hz)|Output: 12V 4A Working Temperature: 37 ± 2°C, 60 ± 2°C More Info About This Product: User Manual

Read more less