A ready-to-use low alcohol dual chain quat disinfectant Effectively and quickly loosens and suspends blood and bodily fluids, non-organic and organic soil, and other cellular debris for easy removal Will effectively sanitize environmental surfaces with a 10-second contact time and disinfect environmental and equipment surfaces with a 2-minute contact time Manufacturer Micro Scientific Industries Country of Origin United States Active Ingredients Isopropyl Alcohol / 2-Butoxyethanol / N-Alkyl Dimethyl Benzyl Ammonium Chloride / N-Alkyl Dimethyl Ethylbenzyl Ammonium Chloride Application Surface Disinfectant Cleaner Container Type Bottle Dispensing Method Manual Pour Form Liquid Product Dating McKesson Acceptable Dating: we will ship >= 180 days Scent Alcohol Scent Sterility NonSterile Type Broad Spectrum UNSPSC Code 42281704 Volume 24 oz.

Read more less

Confirm biological monitoring services include: culturing service, immediate test failure notification, confidential online test results, reminder if you forget to test, expired product replacement program, certificate of participation, quarterly results report. Does not include prepaid envelopes.

Read more less

Specifically designed to easily detect presence of air in pre-vacuum steam sterilizers Smaller size 5" x 3.75" x 0.625" (9.5 x 13 x 1.5 cm) reduces waste and storage space Easy-to-read test sheet clearly identifies failures /can be filed for record keeping purposes Lead-free ink reduces amount of hazardous waste / can be disposed in regular trash Easy to interpret indicator sheet with blue to dark color transition Process at 134°C for 3.5 minutes Designed for simulating a 4 kg cotton pack according to ISO 11140-5 Type 2

Read more less

SporView is an in-office biological indicator (BI) system certified for use with all steam sterilization cycles. This system gives clear, easy to interpret results for monitoring the effectiveness of the sterilization process. Biological Indicator results are known after 24 hours incubation in any compatible dry block incubator operating at 55-60°C.

Read more less

SporView is an in-office biological indicator (BI) system certified for use with all steam sterilization cycles. This system gives clear, easy to interpret results for monitoring the effectiveness of the sterilization process. Biological Indicator results are known after 24 hours incubation in any compatible dry block incubator operating at 55-60°C.

Read more less

SporView is an in-office biological indicator (BI) system certified for use with all steam sterilization cycles. This system gives clear, easy to interpret results for monitoring the effectiveness of the sterilization process. Biological Indicator results are known after 24 hours incubation in any compatible dry block incubator operating at 55-60°C.

Read more less

SporView EO Gas Self-Contained Biological Indicator, 25/bx

Read more less

Biological Indicator Test Pack (25 Controls), 25/cs

Read more less

SporView 10 self-contained biological indicators are intended for monitoring the efficacy of saturated steam sterilization processes. SporView 10 self-contained biological indicator test results shall be recorded at 10 hours and utilize a conventional spore growth readout for rapid and reliable monitoring of steam sterilization processes without the use of enzyme based technology or specific and specialized incubators or monitoring devices.

Read more less

Mail-In Sterilizer Monitoring Service, 12 Tests/Box. Certified for use in Steam, EO gas, Dry heat and Chemical vapor processes. All include laboratory reports, 24/7 access to test results via a secured website and immediate phone call in case of positive failed tests.

Read more less

The ConFirm strips contain both Bacillus stearothermophilus and Bacillus subtilis spores and therefore may be used to test all sterilization processes-steam, chemical vapor, dry heat and ethylene oxide. Mail-in sterilizer monitoring service provides: test results in 24 hours, the ability to check results online, a free reminder program, peace of mind and sterility assurance. Easy to use: 1) Sterilize, 2) Mail, 3) Get results, 4) Get proof. Economical, one of the most cost- effective methods of biological monitoring.

Read more less

In-office system for monitoring steam sterilizers. Easy to use and interpret. Results in 24 hours. Simply process vial in a normal sterilizer cycle. Then activate vial, incubate, and record results. If any spores survive the process, the vial medium will turn yellow. The incubator is 24 volt and holds up to 14 indicators. Indicators are also compatible with the current 3M Attest incubator.

Read more less

In-office system for monitoring steam sterilizers. Easy to use and interpret. Results in 24 hours. Simply process vial in a normal sterilizer cycle. Then activate vial, incubate, and record results. If any spores survive the process, the vial medium will turn yellow. The incubator is 24 volt and holds up to 14 indicators. Indicators are also compatible with the current 3M Attest incubator.

Read more less

In-office system for monitoring steam sterilizers. Easy to use and interpret. Results in 24 hours. Simply process vial in a normal sterilizer cycle. Then activate vial, incubate, and record results. If any spores survive the process, the vial medium will turn yellow. The incubator is 24 volt and holds up to 14 indicators. Indicators are also compatible with the current 3M Attest incubator.

Read more less

Certified for use in Steam, EO gas, Dry heat and Chemical vapor processes. All include laboratory reports, 24/7 access to test results via a secured website and immediate phone call in case of positive failed tests.

Read more less

In-office system for monitoring steam sterilizers. Easy to use and interpret. Results in just 10 hours. Simply process vial in a normal sterilizer cycle. Then activate vial, incubate and record results. If any spores survive the process, the indicator media will turn yellow.

Read more less

Steam Biological Indicators 25/Pk. A breakthrough in biological monitoring - results in just 10 hours. Indicators containing bacterial spores are processed in a normal sterilizer cycle then placed in an incubator. Easy-to-read results are available in 10 hours.

Read more less

In-office system for monitoring steam sterilizers. Easy to use and interpret. Results in just 10 hours. Simply process vial in a normal sterilizer cycle. Then activate vial, incubate and record results. If any spores survive the process, the indicator media will turn yellow.

Read more less

BD125X/1 / Bowie & Dick Test Pack Chemical Indicator with warning sheet designed for testing air removal efficiency of vacuum-assisted steam sterilizers. 100 % Lead Free. Bowie-Dick Test Pack is designed for testing air removal efficiency of dynamic-air-removal steam sterilizers operating at 132 °C for 4 minutes and at 134 °C for 3.5 minutes. Characteristics: Type 2 Chemical Indicator Equivalent in performance to the ANSI/AAMI ST79 Bowie-Dick Towel Pack. Detects residual air in the sterilizer chamber due to air leaks, air removal failures or steam quality. Holds an early warning sheet designed for early detection of air removal failures before they appear on the test sheet. Initial Color: yellow Final Color: dark brown/black (should change homogeneously in the whole sheet) Size: 16 mm x 125 mm x 113 mm Assembly: 1 impermeable barrier – 1 Foam – permeable barriers – 1 Glassine paper – 1 Test Sheet – permeable barriers – 1 Glassine paper – 1 Warning Sheet – permeable barriers – 1 impermeable barrier. Wrapped with crepe paper. Instructions For Use: 1. Run a warm-up cycle to properly heat the sterilizer. 2. Place the Bowie-Dick Test Pack horizontally with the label facing up in an empty vacuum-assisted sterilizer chamber, in the bottom/front of the sterilizer rack and over the drain. The Test Pack should read “THIS SIDE UP” when placed correctly. 3. Run the sterilizer cycle for 3.5 min. – 134 ºC / 4 min. – 132 °C. 4. Remove the test pack from sterilizer and allow it to cool down. Check color change of type 1 indicator on the label. 5. Unwrapped the pack and remove the test and warning sheets. Check them for color change and record the results. Specifications: Process: Steam Initial Color: Yellow Final Color: Black, Dark Brown Indicator Type: Type 2 chemical indicator Regulations: ISO 11140-1, ISO 11140-5  More Info About This Product: Color chart

Read more less

MINIBIO / Auto-reader Incubator for Biological Indicators with 3 positions and built-in printer. For incubation and readout of: Bionova® Rapid Fluorescence Readout Biological Indicators: BT220 (Steam): 3 hs. at 60 ºC, BT221 (Steam): 1 h. at 60 ºC, BT110 (EO): 4 hs. at 37 ºC, BT102 (Formaldehyde): 2 hs. at 60ºC, BT95 (VH2O2): 2 hs. at 60ºC. Bionova® Super Rapid Fluorescence Readout Biological Indicators: BT222 (Steam): 1 h. at 60 ºC, BT223 (Steam): 30 min. at 60 ºC, BT96 (VH2O2): 30 min. at 60ºC. Bionova® Ultra Rapid Fluorescence Readout Biological Indicators: BT224 (Steam): 20 min. at 60ºC. Characteristics: 3 metal positions (38 mm deep, 9 mm diameter) to incubate Rapid/Super Rapid/Ultra Rapid Fluorescence Readout Self-contained biological indicators. 1 ampoule crusher. Special hole for external thermometer. Incorporated top cap. Dual Temperature System: Allows selecting between two different incubation temperatures (37ºC and 60ºC) USB connection for registering results in a PC through Reading and Traceability Software. Allows incubating 3 indicators simultaneously, in different incubation times, at the same temperature. Thermal Printer to record results. Sound alarm for event indication Detection and automatic cancellation of the fluorescence reading of the biological indicator. Specifications: Fluorescence Reading Wavelength: ~ 460 nm Firmware Update By The User. Dimensions: 180 mm High, 154 mm wide and 105 mm deep. Voltage Range: 100 €“ 240 V AC Power: 28 W Frequency: 50-60 Hz Operating Specifications: Input 100/240V 0.2A (50/60Hz)|Output: 12V 4A Working Temperature: 37 ± 2°C, 60 ± 2°C More Info About This Product: User Manual

Read more less

Safe for use on non-porous surfaces. Effective against TB in 3 minutes, and HIV-1, HCV, HBV and MRSA in 2 minutes. Disinfectant, cleaner, decontaminant, all in one. May be used on most medical device materials. For use on hard, non-porous surfaces. Ideal for hospitals, medical/dental offices, daycares, schools, clean rooms, home sanitizing, and nursing facilities CaviCide Disinfectant kills the following viruses within minutes. Mycobacterium tuberculosis var: bovis (BCG) (TB) Staphylococcus aureus Pseudomonas aeruginosa Salmonella enterica Trichophyton mentagrophytes Resistant Staphylococcus aureus (MRSA) Vancomycin Resistant Enterococcus faecalis (VRE) Staphylococcus aureus with reduced susceptibility to vancomycin Hepatitis B Virus (HBV) Hepatitis C Virus (HCV) Herpes Simplex Virus Types 1 and 2 Human Immunodeficiency Virus (HIV-1) Human Coronavirus (not associated with Severe Acute Respiratory Syndrome or SARS) Influenza A2 Virus Features This product may be used in healthcare settings such as: Hospitals Operating rooms Emergency medical settings Surgical centers Outpatient Surgical Centers Isolation areas Neonatal units Laboratories Nursing homes Ophthalmic and optometric facilities Dental offices Animal care facilities Salon settings Emergency vehicles Schools Health club facilities Bathrooms Daycare centers Correctional facilities Laundry rooms Other critical care areas where control of cross contamination between treated surfaces is important. It also effectively clean and disinfect, when used as directed, such items: Interior and exterior surfaces of infant incubators, bassinets Infant/child care equipment surfaces Oxygen hoods Ambulance equipment surfaces Amalgamators and dental curing lights Exterior surfaces of anesthesia machines and respiratory therapy equipment This product is not to be used as a terminal sterilant/high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to preclean or decontaminate critical or semi-critical medical devices prior to sterilization or high level disinfection. This product may be used to disinfect non-critical medical devices, which come in contact only with intact skin. Manufacturer # 13-1025 Brand CaviCide™ Manufacturer Metrex Research Active Ingredients Isopropyl Alcohol Application Surface Disinfectant Cleaner Container Type Jug Dispensing Method Manual Pour Form Liquid Scent Alcohol Scent Sterility NonSterile Type Alcohol Based UNSPSC Code 42281604 Volume 2.5 gal.

Read more less

Biological Monitoring Value Mail-In Service Includes: 1 Bacterial Spore Test Strip & 1 Control Strip and Envelope (Postage Not Included). Box of 52 test. sterilization processes – Steam, Chemical Vapor (Chemiclave), Dry Heat and Ethylene Oxide.

Read more less

Biological Monitoring Mail-In Service (Weekly) Includes: (2) Bacterial Spore Test Strips & (1) Control Strip, Postage-Paid Envelope. 48 tests/box

Read more less

Biological Monitoring Mail-In Service (Monthly) Includes: (2) Bacterial Spore Test Strips & (1) Control Strip, Postage-Paid Envelope. 12 tests/bx

Read more less

Opti-Cide Max Surface Disinfectant Cleaner Alcohol Based Manual Pour Liquid 1 gal. Jug Alcohol Scent NonSterile, 4/CS Opti-Cide max kills tested organisms in 30 seconds to 1 minute, except on tb which is killed in 2 minutes Opti-Cide MAX also kills the dangerous ESKAPE and ESKAPE MDRO organisms in 1 minute Opti-Cide MAX is safe on clinical surfaces such as acrylic, aluminum, brass, copper, stainless steel, chrome, plastics and more Our low alcohol formula (20%) won't cloud plastics like high alcohol formulas.  Opti-Cide MAX is a true broad spectrum disinfectant this is Bactericidal, Fungicidal, Virucidal, and Tuberculocidal Manufacturer # M60035 Brand Opti-Cide® Max Manufacturer Micro Scientific Industries Country of Origin United States Active Ingredients Isopropyl Alcohol Application Surface Disinfectant Cleaner Container Type Jug Dispensing Method Manual Pour Form Liquid Product Dating McKesson Acceptable Dating: we will ship >= 90 days Scent Alcohol Scent Sterility NonSterile Type Alcohol Based UNSPSC Code 42281604 Volume 1 gal. 1 Gallon bottle. Opti-Cide MAX is the next evolution in Micro-Scientific’s surface disinfectant offering. Opti-Cide MAX is the best alternative for an everyday, multiple-use surface disinfectant. It is fast, broad spectrum, compatible with surfaces and an excellent cleaner. Opti-Cide MAX kills tested organisms in 30 seconds to 1 minute, except on TB which is killed in 2 minutes. Faster kill times mean faster turnovers. Opti-Cide MAX also kills the dangerous ESKAPE and ESKAPE MDRO organisms in 1 minute. ESKAPE bacteria are responsible for approximately 2/3 of all Hospital Acquired infections (HAI’s).Opti-Cide MAX is safe on clinical surfaces such as acrylic, aluminum, brass, copper, stainless steel, chrome, plastics and more. It cleans better than high alcohol formulas (55%) as it won’t affix blood and soil to surfaces. Our low alcohol formula (20%) won’t cloud plastics like high alcohol formulas. Opti-Cide MAX has a powerful scrubbing ability to quickly and effectively clean surfaces, while still being safe on surfaces. Opti-Cide MAX is a true broad spectrum disinfectant this is Bactericidal, Fungicidal, Virucidal, and Tuberculocidal.

Read more less