Glutaraldehyde High-Level Disinfectant MetriCide™ 28 Activation Required Liquid 1 gal. Jug Max 28 Day Reuse MetriCide 28 High-Level Disinfectant/Sterilant, 2.5% Glutaraldehyde, Contains Surfactants, Sterilization in 10 hours, Reusable up to 28 days, 1 Gallon. Reusable for up to 28 days Recommended for immersible and heat-sensitive equipment and instruments Contains a surfactant No dilution required WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Brand MetriCide™ 28 Manufacturer Metrex Research Country of Origin United States Activation Method Activation Required Active Ingredients 2.5% Glutaraldehyde Application Glutaraldehyde High-Level Disinfectant Container Type Jug For Use With For MetriTest™ 1.8% Glutaraldehyde Concentration Indicator (10-304) Form Liquid Scent Fruity Scent

Read more less

The Miltex 8-15TC Olsen-Hegar Needle Holder have a length of 5.5in.. These Olsen-Hegar Needle holders are made of German grade stainless steel and Tungsten Carbide. They are a convenient surgical instruments as they have a blade at the end of the jaws. Needle Holder / Scissor combo Tungsten Carbide Gold Handle Manufacturer # 8-15TC Manufacturer Integra Lifesciences Country of Origin Germany Application Needle Holder Grade Surgical Grade Handle Type Finger Ring Handle Length 5-1/2 Inch Length Locking Type Locking Material Tungsten Carbide Style Olsen-Hegar Tip Type Serrated Jaws Type Scissor Type UNSPSC Code 42292903

Read more less

The Miltex 8-44 Mayo-Hegar Needle Holderare used in a variety of surgical procedures. Mayo-Hegar needle hodlers are one of the most commonly used surgical instruments for both human and veterinary procedures. These needle holders are made of German grade stainless steel and a length of 6in. Manufacturer # 8-44 Manufacturer Integra Lifesciences Country of Origin Germany Application Needle Holder Grade Surgical Grade Handle Type Finger Ring Handle Length 6 Inch Length Locking Type Locking Material Stainless Steel Style Mayo-Hegar Tip Type Serrated Jaws Type Scissor Type UNSPSC Code 42292903

Read more less

The Miltex 8-15 Olsen-Hegar Needle Holder have a length of 5.5in.. These Olsen-Hegar Needle holders are made of German grade stainless steel and are a convenient surgical instruments as they have a blade at the end of the jaws.

Read more less

Highest Quaility Surgical Instruments, Sugical Supplies, and Tools by MILTEX Manufacturer # 8-42 Manufacturer Integra Lifesciences Country of Origin Germany Application Needle Holder Length 5 Inch Length Style Mayo-Hegar UNSPSC Code 42292903

Read more less

The Miltex Vantage V918-1828 Castroviejo needle holder is made from high quality Japanese stainless steel and measures 5.5" in length. It has a spring handle with a lock and straight, smooth jaws.

Read more less

Miltex Carb-N-Sert Needle Holders jaws are made of tungsten carbide, the hardest steel made for surgical instruments, they are then bonded to needle holders made of the finest quality stainless steel. Teeth are precision milled into the tungsten carbide, forming sharp pyramid-shapes to provide a positive non-slip grip on needles and sutures. Carb-N-Sert Needle Holders are specifically designed for precise suturing. Each instrument is satin finished to reduce glare. The edges around the outside of the jaws are chamfered to prevent accidental cutting of suture material when held in the jaws. The edges around the box lock have distinct non-catch bevels, preventing fraying of suture material. Gold plated finger rings identify these tungsten carbide instruments.Applications/ Instrument Types: Podiatry Instruments Animal Health / Veterinary Instruments

Read more less

Highest Quaility Surgical Instruments, Sugical Supplies, and Tools by MILTEX Manufacturer # 18-1828 Manufacturer Integra Lifesciences Country of Origin Germany Application Needle Holder Grade Surgical Grade Handle Type Spring Handle Length 5-1/2 Inch Length Locking Type Locking Material Stainless Steel Style Castroviejo Tip Type Smooth Jaws Type Plier Type UNSPSC Code 42292903

Read more less

Miltex Carb-N-Sert Needle Holders jaws are made of tungsten carbide, the hardest steel made for surgical instruments, they are then bonded to needle holders made of the finest quality stainless steel. Teeth are precision milled into the tungsten carbide, forming sharp pyramid-shapes to provide a positive non-slip grip on needles and sutures. Carb-N-Sert Needle Holders are specifically designed for precise suturing. Each instrument is satin finished to reduce glare. The edges around the outside of the jaws are chamfered to prevent accidental cutting of suture material when held in the jaws. The edges around the box lock have distinct non-catch bevels, preventing fraying of suture material. Gold plated finger rings identify these tungsten carbide instruments. Manufacturer # 8-50TC Manufacturer Integra Lifesciences Country of Origin Germany Application Needle Holder Grade Surgical Grade Handle Type Finger Ring Handle Length 6 Inch Length Locking Type Locking Material Tungsten Carbide Style Crile-Wood Tip Type Serrated Jaws Type Scissor Type UNSPSC Code 42292903

Read more less

OPA Concentration Indicator MetriCide™ OPA Plus Pad 100 Test Strips Bottle Single Use MetriCide OPA Plus is a high-level disinfectant for reprocessing heat-sensitive semi-critical medical devices for which sterilization is not suitable when used according to the instructions for use. It is a glutaraldehyde-free solution (the active ingredient is ortho-Phthalaldehyde) and can be used manually or in an automated endoscope reprocessor (AER). Manufacturer # 10-602 Brand MetriCide™ OPA Plus Manufacturer Metrex Research Country of Origin United States Application OPA Concentration Indicator Container Type Bottle For Use With For MetriCide® OPA Plus OPA High-Level Disinfectant (10-6000) Form Pad UNSPSC Code 42281801 Usage Single Use Volume 100 Test Strips Features and Benefits MetriCide OPA Plus Solution Test Strips are a concentration monitor dedicated for use with MetriCide OPA Plus with a minimum recommended concentration (MRC) of 0.3%. Disinfects a wide range of endoscopes and other heat-sensitive semi-critical medical devices Designed for both automated and manual instrument reprocessing When used manually, it disinfects in 12 minutes at 20o C and can be reused for up to 30 days (when monitored according to label instructions) - the longest-lasting high-level disinfectant on the market today* When used in an AER, it disinfects in 5 minutes at 25o C in an AER and can be reused for up to 14 days (when monitored according to label instructions) MetriCide OPA Plus Solution Test Strips are fast - see results in only 60 seconds List of Uses Endoscopy Other areas where high-level disinfection is required Sterile Processing Surgery Centers

Read more less

OPA High-Level Disinfectant MetriCide OPA Plus RTU Liquid 1 gal. Jug Max 30-Day Reuse for Manual Soaking MetriCide OPA Plus is a high-level disinfectant for reprocessing heat-sensitive semi-critical medical devices for which sterilization is not suitable when used according to the instructions for use. It is a glutaraldehyde-free solution (the active ingredient is ortho-phthalaldehyde) and can be used manually or in an automated endoscope reprocessor (AER). Features and Benefits MetriCide OPA Plus Solution Test Strips are a concentration monitor dedicated for use with MetriCide OPA Plus with a minimum recommended concentration (MRC) of 0.3%. Disinfects a wide range of endoscopes and other heat-sensitive semi-critical medical devices Designed for both automated and manual instrument reprocessing When used manually, it disinfects in 12 minutes at 20o C and can be reused for up to 30 days (when monitored according to label instructions) - the longest-lasting high-level disinfectant on the market today* When used in an AER, it disinfects in 5 minutes at 25o C in an AER and can be reused for up to 14 days (when monitored according to label instructions) MetriCide OPA Plus Solution Test Strips are fast - see results in only 60 seconds List of Uses Endoscopy Other areas where high-level disinfection is required Sterile Processing Surgery Centers Manufacturer # 10-6000 Brand MetriCide™ OPA Plus Manufacturer Metrex Research Country of Origin China Activation Method RTU Active Ingredients 0.6% ortho-Phthalaldehyde (OPA) Application OPA High-Level Disinfectant Container Type Jug For Use With For MetriCide® OPA Plus OPA Concentration Indicator (10-602) Form Liquid Scent Mild Scent UNSPSC Code 42281603 Usage Max 30 Day Reuse for Manual Soaking Volume 1 gal.

Read more less

MetriCide Plus 30 is intended for use in a tray system with various noncritical, semi-critical, and critical devices and may be reused for up to 28 days. Manufacturer # 10-3200 Brand MetriCide Plus 30® Manufacturer Metrex Research Country of Origin United States Activation Method Activation Required Active Ingredients 3.4% Glutaraldehyde Application Glutaraldehyde High-Level Disinfectant Container Type Jug For Use With For MetriTest™ 1.8% Glutaraldehyde Concentration Indicator (10-304) Form Liquid Scent Fruity Scent UNSPSC Code 42281603 Usage Max 28 Day Reuse Volume 1 gal. Features and Benefits The activated solution has to stay above the minimum effective concentration (MEC) of glutaraldehyde, as measured by a chemical indicator. MetriTest™ 1.8% Test Strips are a glutaraldehyde concentration monitor for use in glutaraldehyde-containing solutions with a minimum effective concentration (MEC) of 1.8% glutaraldehyde. It is required to test the glutaraldehyde solution prior to each use. Recommended for immersible and heat-sensitive equipment and instruments Contains surfactants Recommended for heat-sensitive equipment and instruments Contains a surfactant No dilution required WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov List of Uses Anesthesia equipment, respiratory therapy equipment, rubber and plastic objects For high-level disinfection/ sterilization of heat sensitive medical equipment for which alternative methods of sterilization are not suitable Stainless steel instruments

Read more less

MetriCide Plus 30 is intended for use in a tray system with a variety of noncritical, semi-critical, and critical devices and may be reused up to 28 days. Manufacturer # 10-304 Brand MetriTest™ 1.8% Manufacturer Metrex Research Country of Origin United Kingdom Application Glutaraldehyde Concentration Indicator Container Type Bottle For Use With For McKesson 28 Day Glutaraldehyde (68-102800) / MetriCide® 28 Glutaraldehyde High-Level Disinfectant (10-2800, 10-2805) / MetriCide Plus 30® Glutaraldehyde High-Level Disinfectant (10-3200) Form Pad Product Dating McKesson Acceptable Dating: we will ship >= 90 days UNSPSC Code 42281801 Usage Single Use Volume 60 Test Strips Features and Benefits The activated solution has to stay above the minimum effective concentration (MEC) of glutaraldehyde, as measured by a chemical indicator. MetriTest™ 1.8% Test Strips are a glutaraldehyde concentration monitor for use in glutaraldehyde-containing solutions with a minimum effective concentration (MEC) of 1.8% glutaraldehyde. It is required to test the glutaraldehyde solution prior to each use. Recommended for immersible and heat-sensitive equipment and instruments Contains surfactants Recommended for heat-sensitive equipment and instruments Contains a surfactant No dilution required WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov List of Uses Anesthesia equipment, respiratory therapy equipment, rubber and plastic objects For high-level disinfection/ sterilization of heat sensitive medical equipment for which alternative methods of sterilization are not suitable Stainless steel instruments

Read more less