PDI Sani-Hands Instant Hand Sanitizing Wipes, Canister with 135 Wipes, 6' x 7.5' Sani-Hands Instant Hand Sanitizing Wipes, Canister with 135 Wipes, 6' x 7.5'. 70% Ethyl Alcohol. Clinically proven to kill 99.99% of germs. Contains soothing Aloe and Vitamin E to moisturize the skin. Keep hands clean and free of contaminants with these 6 x 7.5-inch Sani-Hands® Instant Hand Sanitizing Wipes. They thoroughly cleanse the skin, removing dirt, soil and other substances. Sani-Hands® hand sanitizing wipes are also saturated with a 70 percent ethyl alcohol solution, an effective method of killing most bacteria and germs. Quick drying leaves hands clean and safe for handling foods and drinks. These unscented ethyl alcohol hand wipes contain aloe and vitamin E, restoring moisture and soothing skin and counteracting the drying effect of the alcohol. They are contained in a canister, keeping them moist and making them conveniently portable and ready to use whenever and wherever needed. The wipes meet OSHA standards for bloodborne pathogens and are suitable for clinical and workplace use. A canister holds 135 sanitizing wipes. The 6 x 7.5-inch Sani-Hands® hand sanitizing wipes clean hands thoroughly, removing soil as well as germs and bacteria A 70 percent ethyl alcohol solution offers effective germ-killing power The solution dries rapidly, making wipes safe to use before eating or drinking Aloe and vitamin E soothe the skin and restore moisture Ethyl alcohol hand wipes are individually wrapped, preventing drying out and providing convenient dispensing and portability These wipes meet OSHA standards for bloodborne pathogens, making them suitable for professional clinics There're 135 wipes per canister PDI Sani Hands Instant Hand Sanitizing Wipes from SurgiMac remove soil and bacteria AND kill 99.99% of germs. Sani-Hands ALC Alcohol Gel Hand Wipes contain an alcohol based formula as recommended by the CDC for hand hygiene.In a clinical study, Sani-Hands ALC Antimicrobial Alcohol Gel Hand Wipes exceeded performance criteria defined in the 1994 FDA Tentative Final Monograph, requiring a handwash product achieve >2.0 log10 reduction in a marker organism after the first treatment. The performance of Sani-Hands ALC Antimicrobial Alcohol Gel Hand Wipes is enhanced by the physical removal of soil and bacteria by the wipe, a function that rub-in alcohol-based handwashes alone can not accomplish.PDI Sani Hands Instant Hand Sanitizing Wipes Features: Antimicrobial gel rub enhanced by the friction of the wipe delivery system are proven to remove soil and kill 99.99% of microorganisms Kills Clostridium difficile (C. diff) 15 second contact time 70% Ethyl Alcohol formulation Clinical study demonstrated higher microbial reduction than an alcohol gel rub Cleans and sanitizes hands when soap and water are not available Clinically proven to hydrate the skin after repeated use Fragrance free and dye free FDA Food Code Compliant – Approved for use before eating Individual packets ideal for meal trays Contains moisturizing aloe, glycerin and Vitamin E Convenient quick-pull canisters and individual packet options Formerly known as Sani-Dex ALC Hand Wipes Tubs contain 6' x 7.5' wipes Individual packets contain 8' x 5.3' wipes Manufacturer Code: P13472 Brand: Sani-Hands Chemical Concentration: 70% Ethyl Alcohol Class: Towelettes Packaging: Can of 135 wipes Scent: Unscented, with aloe vera Formulation 70% Ethyl Alcohol Efficacy Clinically proven to kill 99.99% of germs Applicator  Wipe format removes dirt and soil better than gels and foams FDA Food Code Compliant Safe to use before eating and drinking Compliance Meets OSHA Bloodborne Pathogen Standard 29 CFR Part 1910.1030 (d)(2)(iv) Helps meet The Joint Commission 2018 National Patient Safety Goal #7 Instructions for Use Wipe fingertips and nails individually Wipe between all fingers of both hands Wipe both thumbs Wipe palms of both hands thoroughly Wipe back of hands Wipe both wrists and forearms Latex Not made with natural rubber latex Made in the USA Manufactured in the US with domestic and foreign materials to the highest quality standards Emollients Contains soothing Aloe and Vitamin E to moisturize the skin Watch the video below for further details - https://youtu.be/YqEa--5HKGw

Read more less

  An ideal hand hygiene solution for staff, visitors, patients or residents who cannot get out of bed to clean their hands. The cost to treat an HAI can be as much as $58,500. By preventing just one, a patient hand hygiene program could pay for itself for an entire year.*BUY 1 case of PDI Sani-Hands® Wipes Instant Hand Sanitizing Wipes (Large Canister P15984) and one case of PDI Easy Screen® Cleaning Wipes (P03672) – GET the PDI Safety Station (P013700) free.* PDI Sani Hands ALC Antimicrobial Alcohol Hand Wipes are the #1 sanitizing wipe in the healthcare market. PDI Sani-Hands ALC Hand Wipes are proven more effective than alcohol gels alone, when soap and water are not available. Sani-Hands ALC Wipes remove soil and bacteria AND kill 99.99% of germs. Rub-in alcohol-based handwashes (gels, foams and rinses) sanitize but leave debris and soil on hands. Sani-Hands ALC Antimicrobial Alcohol Hand Wipes help clean and sanitize hands with one product.  Contains 220 wipes Multi-count canister accomodates frequent usage Place in schools, offices, patient rooms, nursing stations and hallways for convenient access Large Canister (220 Count) SKU # P15984 Packaging: 6/220's Dimensions: 6" x 7.5" Formulation 70% Ethyl Alcohol Efficacy Clinically proven to kill 99.99% of germs Applicator  Wipe format removes dirt and soil better than gels and foams FDA Food Code Compliant Safe to use before eating and drinking Compliance Meets OSHA Bloodborne Pathogen Standard 29 CFR Part 1910.1030 (d)(2)(iv) Helps meet The Joint Commission 2018 National Patient Safety Goal #7 Instructions for Use Wipe fingertips and nails individually Wipe between all fingers of both hands Wipe both thumbs Wipe palms of both hands thoroughly Wipe back of hands Wipe both wrists and forearms Latex Not made with natural rubber latex Made in the USA Manufactured in the US with domestic and foreign materials to the highest quality standards Emollients Contains soothing Aloe and Vitamin E to moisturize the skin Watch the video below for further details - https://youtu.be/YqEa--5HKGw

Read more less

PDI Sani-Cloth Bleach Disinfectant Wipes are made with a durable low lint wipe and saturated with a stabilized bleach solution for superior surface cleaning qualities. Sani-Cloth Bleach Wipes are effective against 50 microorganisms in as little as 4 minutes and are ideal for use on non-porous surfaces such as countertops, tables, carts and other medical equipment requiring the disinfecting power of bleach. For more information regarding the EPA's List N Disinfectants for Coronavirus (COVID-19) please visit https://www.epa.gov/pesticide-registration/list-n-disinfectants-coronavirus-covid-19 Ideal for disinfecting high risk areas endemic with Clostridium difficile spores and Norovirus Effective against 50 microorganims, including Clostridioides difficile, Norovirus, SARS-CoV-2 and 14 multi-drug resistant organisms, in 4 minutes EPA-registered intermediate level disinfectant that isbactericidal, tuberculocidal, virucidal, fungicidal, sporicidal (Clostridioides difficile) Compatible with a broad range of surfaces and equipment in healthcare Contains 65 x-large wipes Perfect wipe size for larger surface areas Manufacturer # P25784 Brand Sani-Cloth® Bleach Manufacturer Professional Disposables Country of Origin United States Active Ingredients Sodium Hypochlorite Application Surface Disinfectant Cleaner Container Type Canister Dimensions 7-1/2 X 15 Inch Dispensing Method Manual Pull EPA Registration Number 9480-8 Form Wipe Is_ECAT N Is_GSA Y Is_VA N Scent Chlorine Scent Sterility NonSterile Type Premoistened Germicidal UNSPSC Code 42281604 Volume 65 Count

Read more less

Dispenser Stand PDI Black Manual Floor Stand Includes: Base, column, header, hardware, waste receptacle

Read more less

Sani Professional No-Rinse Sanitizing Multi-Surface Surface Disinfectant Premoistened Alcohol Based Manual Pull Wipe 175 Count Canister Alcohol Scent NonSterile Sani-Professional® No-Rinse Sanitizing Multi-Surface Wipes kill 99.999% of Listeria monocytogenes on hard, nonporous food contact surfaces The multi-surface wipes contain an improved formula that is effective against Listeria monocytogenes, E.coli, Staphylococcus aureus, and Shigella boydii Please refer to the manufacturer's Instructions for Use for additional data regarding claims

Read more less

Baby Wipe Nice'n Clean® Soft Pack Aloe / Vitamin E / Chamomile Unscented 80 Count  Features Feature an extra mild formula which contains chamomile, developed for newborn babies' soft and delicate skin Designed for extra comfort and strength Soft cloths pre-moistened with a mild, cleansing solution Hypoallergenic and alcohol free Tissue-like dispensing allows single-handed use WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Case of 12 packs Manufacturer # M233XT Brand Nice'n Clean® Manufacturer Professional Disposables Country of Origin United States Active Ingredients Aloe / Vitamin E / Chamomile Application Baby Wipe Container Type Soft Pack Dimensions 6-3/5 X 7-9/10 Inch Number per Pack 80 Count Scent Unscented Sterility NonSterile UNSPSC Code 53131624   Applicator  Designed for extra comfort and strength One-handed, tissue-like dispensing Softpack allows for less waste than tub formats Formulation Newborn Baby Wipes feature an extra mild formula which contains chamomile, developed for newborn babies’ soft and delicate skin Scented and Unscented Baby Wipes feature a gentle formula which contains Aloe and Vitamin E All baby wipes are alcohol and paraben-free Latex Not made with natural rubber latex Made in the USA Manufactured in the US with domestic and foreign materials to the highest quality standards

Read more less

Impregnated Nasal Swabstick Kit Profend® Povidone-Iodine NonSterile 4 per Pack Features 0.75 mL Povidone-Iodine (PVP-I) per swabstick Kills 99.7% of S. aureus at 1 hour and 99.9% at 12 hours For S. aureus and MRSA-colonized patients in the surgical unit, ICU, and other areas of the hospital Each kit contains 4 pre-saturated swabsticks Neat, dry-handle design for limited mess Small nasal swab for patient comfort Manufacturer # X12048 Brand Profend® Manufacturer Professional Disposables Country of Origin United States Application Impregnated Nasal Swabstick Kit HCPCS U0002 Impregnated Ingredients Povidone-Iodine Number per Pack 4 per Pack Product Dating McKesson Acceptable Dating: we will ship >= 90 days Sterility NonSterile UNSPSC Code 42141504

Read more less

Baby Wipe Nice'n Clean® Soft Pack Aloe / Vitamin E Scented 40 Count Features Designed for extra comfort and strength Soft cloths pre-moistened with mild cleansing solution Gentle formula contains Aloe and Vitamin E Hypoallergenic and alcohol free Solo® lid prevents drying out and provides convenient access to next wipe 12 packs per case Manufacturer # Q34540 Brand Nice'n Clean® Manufacturer Professional Disposables Country of Origin United States Active Ingredients Aloe / Vitamin E Application Baby Wipe Container Type Soft Pack Dimensions 6-3/5 X 7-9/10 Inch Number per Pack 40 Count Scent Scented Sterility NonSterile UNSPSC Code 53131624

Read more less

PDI Sani-Cloth® Prime Surface Disinfectant Cleaner Premoistened Germicidal Manual Pull Wipe 70 Count Canister Alcohol Scent NonSterile Features For more information regarding the EPA's List N Disinfectants for Coronavirus (COVID-19) please visit https://www.epa.gov/pesticide-registration/list-n-disinfectants-coronavirus-covid-19 Powered by a next generation proprietary blend of quaternary ammonium, isopropyl alcohol (IPA), and ethanol, this unique combination delivers SPEED—a true 1-minute bactericidal, fungicidal, virucidal, and tuberculocidal disinfectant—and the POWER to destroy over 50 microorganisms, including Candida auris along with 17 multi-drug resistant organisms (MDROs) like MRSA, CRE, and VRE EPA-registered intermediate level disinfectant Pre-moistened wipes are ready to use Compatible with materials commonly used in healthcare environments Please refer to the manufacturer's Instructions for Use for additional data regarding claims WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Read more less

An ideal hand hygiene solution for staff, visitors, patients or residents who cannot get out of bed to clean their hands. The cost to treat an HAI can be as much as $58,500. By preventing just one, a patient hand hygiene program could pay for itself for an entire year. Individual Packets SKU # D43600 Packaging: 10/100's Dimensions: 5" x 8"

Read more less

An ideal hand hygiene solution for staff, visitors, patients or residents who cannot get out of bed to clean their hands. The cost to treat an HAI can be as much as $58,500. By preventing just one, a patient hand hygiene program could pay for itself for an entire year. Clinically proven to kill 99.99% of germs Contains soothing aloe and vitamin E 20 count bedside pack perfect for the typical patient stay Features educational icons Resealable 5-1/2 X 8-3/8 Inch Manufacturer # P71520 Brand Sani-Hands® Manufacturer Professional Disposables Country of Origin United States Active Ingredients Ethyl Alcohol Application Hand Sanitizing Wipe Container Type Soft Pack Form Wipe Scent Scented Strength 70% Strength UNSPSC Code 53131624 Volume 20 Count

Read more less

PDI Sani-Cloth AF3 Surface Disinfectant Cleaner Premoistened Germicidal Manual Pull Wipe 75 Count Canister Mild Scent NonSterile Description Sani-Cloth® AF3 Germicidal Disposable Wipe is effective against 45 microorganisms in 3 minutes. Protecting your staff and patients has never been easier! Alcohol and fragrance free formula is ideal for use around patients, residents and staff, especially those with respiratory sensitivities. Now effective against SARS-CoV-2, the virus that causes COVID-19. Sani-Cloth® AF3 Germicidal Disposable Wipe has demonstrated effectiveness against viruses similar to Monkeypox virus on hard, nonporous surfaces. Therefore, Sani-Cloth® AF3 Germicidal Disposable Wipe can be used against Monkeypox virus when used in accordance with the directions for use against Adenovirus Type 5, Strain Adenoid 75 (ATCC VR-5) on hard, nonporous surfaces. Refer to the CDC website for additional information. C-Large canister (160 count) SKU # P72584 Packaging: 6/75's Dimensions: 7.5" x 15" Contains 75 wipes Multi-count canister accommodates frequent usage For more information regarding the EPA's List N Disinfectants for Coronavirus (COVID-19) please visit https://www.epa.gov/pesticide-registration/list-n-disinfectants-coronavirus-covid-19 Alcohol and fragrance free formula is ideal for use around patients, residents and staff, especially those with respiratory sensitivities45 microorganisms, including SARS-CoV-2 and 13 multi-drug resistant organisms, in 3 minutes EPA-registered intermediate level disinfectant that is bactericidal, tuberculocidal, virucidal Prominent contact time for easy identification and improved compliance with accreditation standards Categorization of pathogens allows for quick identification of relevant efficacy claims Compatible with a broad range of surfaces and equipment in healthcarePlease refer to the manufacturer's Instructions for Use for additional data regarding claims Manufacturer # P72584 Brand Sani-Cloth® AF3 Manufacturer Professional Disposables Country of Origin United States Active Ingredients N-Alkyl Dimethyl Benzyl Ammonium Chloride / N-Alkyl Dimethyl Ethylbenzyl Ammonium Chloride Application Surface Disinfectant Cleaner Container Type Canister Dimensions 7-1/2 X 15 Inch Dispensing Method Manual Pull EPA Registration Number 9480-9 Form Wipe Product Dating McKesson Acceptable Dating: we will ship >= 90 days Scent Mild Scent Sterility NonSterile Type Premoistened Germicidal UNSPSC Code 47131502 Volume 75 Count

Read more less

Ideal for use in alternate care settings including physician and dental offices Effective against 16 microorganisms in 3 minutes Bactericidial, virucidal Cleans and disinfects in one step Multi-count canister accommodates frequent usage Perfect wipe size for larger surface areas Contains 65 X-large wipes WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Manufacturer # Q85084 Brand Sani-Cloth® Plus Manufacturer Professional Disposables Country of Origin Unknown Active Ingredients Isopropyl Alcohol Application Surface Disinfectant Cleaner Container Type Canister Dimensions 7-1/2 X 15 Inch Dispensing Method Manual Pull EPA Registration Number 9480-6 Form Wipe Scent Alcohol Scent Sterility NonSterile Type Premoistened Germicidal UNSPSC Code 47131502 Volume 65 Count Latex Free Indicator Not Made with Natural Rubber Latex

Read more less

PDI Super Sani- Cloth Large Wipes (also known as purple wipes or purple sani cloth) are an industry-leading, EPA-approved disinfecting wipe for medical and dental professionals. These ready-to-use wipes are strong and textured, making them highly effective against a broad range of bacteria, fungi, and viruses. With 70% ethyl alcohol, they are effective against E. coli, staphylococcus, and other organisms. Their large size makes them great for wiping down large surfaces and equipment, such as desks, counters, and computers. These wipes are perfect for the health care and cleaning industries, schools, and offices. Keywords: Disinfecting Wipes, Sani-Cloth Wipes, Antimicrobial Wipes, Alcohol Wipes, EPA-Approved Wipes, Large Wipes. Manufacturer # Q55172 Brand Super Sani-Cloth® (pdi sani wipes) Manufacturer Professional Disposables Country of Origin United States Active Ingredients Isopropyl Alcohol / N-Alkyl Dimethyl Benzyl Ammonium Chloride / N-Alkyl Dimethyl Ethylbenzyl Ammonium Chloride Application Surface Disinfectant Cleaner Container Type Canister Dimensions 6 X 6-3/4 Inch Dispensing Method Manual Pull EPA Registration Number 9480-4 Form Wipe Scent Alcohol Scent Sterility NonSterile Type Premoistened Germicidal UNSPSC Code 42281604 Volume 160 Count Super Sani-Cloth wipes, also known as PDI Sani-Cloth wipes or simply Sani-Cloth wipes, are a convenient and effective way to disinfect hard, non-porous surfaces.  These pre-moistened PDI Sani-Cloth wipes are a favorite in healthcare settings because they kill a broad spectrum of pathogens quickly.  They are also fragrance-free and gentle on surfaces, making them ideal for use in homes, offices, schools and public spaces. Effective against: Bacteria Viruses Spores Features: Kills 99.9% of germs in 2 minutes Fast-acting disinfectant for quick room turnover EPA-registered intermediate-level disinfectant Compatible with a broad range of surfaces Fragrance-free Safe for use on countertops, tables, doorknobs, light switches and other hard, non-porous surfaces Easy to Use: Wipe down the surface to be disinfected with a PDI Super Sani-Cloth Large Disinfectant Wipe. Rebutable super sani cloth brand for dental and medical offices Allow the surface to air dry. Repeat as needed. Warnings: Avoid contact with eyes and skin. If swallowed, get medical help or contact a Poison Control Center right away. Keep out of reach of children and pets. Store in a cool, dry place. Additional Information: Manufacturer Code: Q55172 Brand: Super Sani-Cloth Packaging: Self-dispensing container with 160 wipes Size: 6" x 6.75" EPA Registration Number: 9480-4 Disclaimer: Please refer to the manufacturer's instructions for use for additional data regarding claims.

Read more less

PDI Sani-Cloth Plus Surface Disinfectant Cleaner Premoistened Germicidal Wipe 160 Count Canister Disposable Alcohol Scent NonSterile Features: PDI Sani-Cloth Plus Germicidal Wipe. Large Wipe. Wipe Size is 6" x 6.75". Package Includes: You Get 1 Master With 12 Packs Per Box, 160 Wipes Per Pack For a Total of 1,920 Wipes. 1 Canister (160 Wipes) Technical Specs: EPA Registration Number: 9480-6 Ideal for use in alternate care settings including physician and dental offices Effective against 16 microorganisms in 3 minutes Bactericidial, virucidal Cleans and disinfects in one step Multi-count canister accommodates frequent usage WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov PDI Model#: Q89072

Read more less

PDI Sani-Cloth Bleach Surface Disinfectant Cleaner Premoistened Germicidal Manual Pull Wipe 160 Count Canister Bleach Scent NonSterile Effective against 50 microorganisms in 4 minutes. Ideal for disinfecting high-risk areas contaminated with Clostridioides difficile (C. difficile or C. diff.) spores and Norovirus. Now effective against SARS-CoV-2, the virus that causes COVID-19. Model#P54072 (12/Canister of 75) - Sani-Cloth Bleach Wipes. Ideal for disinfecting high-risk areas endemic with Multidrug-Resistant Organisms, Clostridium difficile spores and Norovirus. Meets CDC, OSHA, and CMS Tag F441 guidelines. Bactericidal, Fungicidal, Tuberculocidal, Virucidal. Compatible with a broad range of surfaces and equipment in healthcare. For use when taking a pathogenic-specific approach to disinfection. Effective against 50 microorganisms in 4 minutes including the following MDROs, bloodborne pathogens, and viruses: • C.difficile spores • Acinetobacter baumannii • Klebsiella pneumoniae • Candida albicans • ESBL-resistant E. coli • ESBL-resistant Klebsiella pneumoniae • Norovirus • MRSA • VRE • VRSA • HIV • HBV • HCV Clinical Wipe Size (160 count) SKU # P84172 Packaging: 12/160s Dimensions: 6" x 5" 6” x 5” wipe size ideal for disinfecting small high-touch surfaces and shared equipment For Lumira systemIdeal for disinfecting high-risk areas endemic with Clostridium difficile spores and NorovirusEffective against 50 microorganisms, including Clostridioides difficile, Norovirus, SARS-CoV-2 and 14 multi-drug resistant organisms, in 4 minutesCompatible with a broad range of surfaces and equipment in healthcare

Read more less

Super Sani-Cloth is a germicidal disposable cloth wipe for use where control of the hazards of cross-contamination is of prime importance. Each Super Sani-Cloth wipe is saturated with a quaternary/alcohol-based formula. Super Sani-Cloth kills 30 strains of bacteria and viruses with a 2-minute kill time. The Super Sani-Cloth is perfect for disinfecting non-porous hard surfaces and equipment. Sani-Cloths are ready to use, requiring no mixing or measuring. PDI Super Sani-Cloth is sold by the box, tub, and case. PDI Super Sani-Cloth Extra-Large Wipes are a quick and easy way to disinfect and clean hard, non-porous surfaces. The wipes are pre-moistened with a hospital-grade disinfectant that kills 99.9% of bacteria, viruses, and spores. They are also fragrance-free and alcohol-free, making them safe for use on a variety of surfaces, including countertops, tables, doorknobs, and light switches. PDI Super Sani-Cloth Extra-Large Wipes are the perfect way to keep your home or office clean and germ-free. Features PDI Super Sani-Cloth Extra-Large Wipes, 8" x 14", P86984, 75 Count, disinfects and cleans hard, non-porous surfaces, kills 99.9% of germs, fragrance-free, alcohol-free, safe for use on a variety of surfaces, perfect for homes, offices, schools, and public spaces, keep your home or office clean and germ-free, disinfect and clean hard, non-porous surfaces, kill harmful bacteria, viruses, and spores. For more information regarding the EPA's List N Disinfectants for Coronavirus (COVID-19) please visit https://www.epa.gov/pesticide-registration/list-n-disinfectants-coronavirus-covid-19 Fast contact time allows for a quick room turnover Effective against 32 microorganisms, including Candida auris, SARS-CoV-2, and 6 multi-drug resistant organisms (MDROs), in 2 minutes Prominent contact time for easy identification and improved compliance with accreditation standards Categorization of pathogens allows for quick identification of relevant efficacy claims Compatible with a broad range of surfaces and equipment in healthcare Please refer to the manufacturer's Instructions for Use for additional data regarding claims WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Disinfects and cleans hard, non-porous surfaces Kills 99.9% of bacteria, viruses, and spores Fragrance-free and alcohol-free Safe for use on a variety of surfaces Perfect for homes, offices, schools, and public spaces Benefits: Keep your home or office clean and germ-free Disinfect and clean hard, non-porous surfaces Kill harmful bacteria, viruses, and spores Safe for use on a variety of surfaces Easy to use How to use: Wipe down the surface to be disinfected or cleaned with a PDI Super Sani-Cloth Extra-Large Wipe. Allow the surface to air dry. Repeat as needed. Warnings: Avoid contact with eyes and skin. If swallowed, get medical help or contact a Poison Control Center right away. Keep out of reach of children and pets. Storage: Store in a cool, dry place. Manufacturer # P86984 Brand Super Sani-Cloth® Manufacturer Professional Disposables Country of Origin United States Active Ingredients Isopropyl Alcohol / N-Alkyl Dimethyl Benzyl Ammonium Chloride / N-Alkyl Dimethyl Ethylbenzyl Ammonium Chloride Application Surface Disinfectant Cleaner Container Type Canister Dimensions 7-1/2 X 15 Inch Dispensing Method Manual Pull EPA Registration Number 9480-4 Form Wipe Product Dating McKesson Acceptable Dating: we will ship >= 90 days Scent Alcohol Scent Sterility NonSterile Type Premoistened Germicidal UNSPSC Code 47131502 Volume 75 Count

Read more less

Effective against 45 microorganisms in 3 minutes. Protecting your staff and patients has never been easier! Alcohol and fragrance free formula is ideal for use around patients, residents and staff, especially those with respiratory sensitivities. Now effective against SARS-CoV-2, the virus that causes COVID-19. Large canister (160 count) SKU # P13872 Packaging: 12/160's Dimensions: 6" x 6.75" Contains 160 wipes Multi-count canister accommodates frequent usage For more information regarding the EPA's List N Disinfectants for Coronavirus (COVID-19) please visit https://www.epa.gov/pesticide-registration/list-n-disinfectants-coronavirus-covid-19 Alcohol and fragrance free formula is ideal for use around patients, residents and staff, especially those with respiratory sensitivities Effective against 45 microorganisms, including SARS-CoV-2 and 13 multi-drug resistant organisms, in 3 minutes EPA-registered intermediate level disinfectant that is bactericidal, tuberculocidal, virucidal Prominent contact time for easy identification and improved compliance with accreditation standards Categorization of pathogens allows for quick identification of relevant efficacy claims Compatible with a broad range of surfaces and equipment in healthcare Please refer to the manufacturer's Instructions for Use for additional data regarding claims WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov PDI Healthcare Sani-Cloth AF3 Germicidal Disposable Wipe Literature PDI Healthcare Sani-Cloth AF3 Germicidal Disposable Wipe Brochure PDI Healthcare Sani-Cloth AF3 Germicidal Disposable Wipe Safety Data Sheet PDI Healthcare Sani-Cloth AF3 Germicidal Disposable Wipe Technical Data Bulletin Manufacturer # P13872 Brand Sani-Cloth® AF3 Manufacturer Professional Disposables Country of Origin United States Active Ingredients N-Alkyl Dimethyl Benzyl Ammonium Chloride / N-Alkyl Dimethyl Ethylbenzyl Ammonium Chloride Application Surface Disinfectant Cleaner Container Type Canister Dimensions 6 X 6-3/4 Inch Dispensing Method Manual Pull EPA Registration Number 9480-9 Form Wipe Scent Mild Scent Sterility NonSterile Type Premoistened Germicidal UNSPSC Code 42281604 Volume 160 Count

Read more less

PDI Easy Screen Surface Cleaner Premoistened Alcohol Based Manual Pull Wipe 70 Count Canister Alcohol Scent NonSterile (Case of 12) Features A compatible touchscreen cleaner that features the power of 70% isopropyl alcohol Rapidly cleans dirt, grime, fingerprints, and smudges Fast-drying, no residue, anti-fogging, anti-streaking Ideal for touchscreens, whiteboards and any equipment requiring 70% IPA as the cleaning formulation Meets AORN’s Guideline for Surgical Attire to clean cell phones, tablets, and other personal communication or hand-held electronic equipment WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Contains 70 wipes Manufacturer # P03672 Brand Easy Screen® Manufacturer Professional Disposables Country of Origin United States Active Ingredients Isopropyl Alcohol Application Surface Cleaner Container Type Canister Dimensions 6 X 9 Inch Dispensing Method Manual Pull Form Wipe Scent Alcohol Scent Sterility NonSterile Type Premoistened Alcohol Based UNSPSC Code 42281604 Volume 70 Count

Read more less

PDI Sani-Cloth AF3 Surface Disinfectant Cleaner Premoistened Germicidal Manual Pull Wipe 80 Count Hard Case Unscented NonSterile Description Effective against 45 microorganisms in 3 minutes. Protecting your staff and patients has never been easier! Alcohol and fragrance free formula is ideal for use around patients, residents and staff, especially those with respiratory sensitivities. Now effective against SARS-CoV-2, the virus that causes COVID-19. Softpack (80 Count) SKU # M8063S80 Packaging: 9/80's per case Dimensions: 8.2" x 9.8" Contains 80 x-large wipes Designed for placement on mobile equipment, such as wheelchairs, transports and workstations on wheels Manufacturer # M8063S80 Brand Sani-Cloth® AF3 Manufacturer Professional Disposables Country of Origin United States Active Ingredients N-Alkyl Dimethyl Benzyl Ammonium Chloride / N-Alkyl Dimethyl Ethylbenzyl Ammonium Chloride Application Surface Disinfectant Cleaner Container Type Hard Case Dimensions 8-1/5 X 9-4/5 Inch Dispensing Method Manual Pull EPA Registration Number 9480-9 Form Wipe Scent Unscented Sterility NonSterile Type Premoistened Germicidal UNSPSC Code 47131502 Volume 80 Count

Read more less

Hygea flushable personal cleansing Cloths clean and refresh better than dry toilet paper alone and are safe for well-maintained sewers and septic Systems.*  Environmentally responsible Cloths are made with 100 percent plant-based fibers and free of chemical binders Easy to dispense: hygea Cloths dispense like tissues Safe for sewers and septic Systems Hypoallergenic, chlorine, alcohol, and natural latex-free 5.5" x 7" Size (576 Washcloths) Product Specifications EC Item Number: 51483112 Manufacturer Name: Professional Disposables Manufacturer Number: A500F48 Application: Flushable Personal Wipe Brand or Series: Hygea® Shipping Width: 3.9 Shipping Height: 1.75 Shipping Depth: 5.7 Shipping Weight: 0.57 Active Ingredients: Aloe Container Type: Soft Pack Dimensions: 5-1/2 X 7 Inch GTIN: 20310819000219 Quantity Per Sell: 48 Scent: Floral Scent

Read more less

PDI Alcohol Prep Pads Sterile, Large - 2.5 x 3 Inch, C69900 (Case of 1000) Brand Professional Disposables International Item Dimensions LxWxH 15.9 x 8.9 x 5.7 inches Item Weight 6.45 Pounds Unit Count 1.00 Count   Large Prep Pad SKU # C69900 Packaging: 10/100's Dimensions: 1.7" x 3.5" Each box contains 100 large prep pads. Packaged for single use.

Read more less

PDI Sani-Cloth® Prime Surface Disinfectant Cleaner Premoistened Germicidal Manual Pull Wipe 160 Count Canister Alcohol Scent NonSterile (Pack of 160) Case of 12 EPA-registered intermediate level disinfectant Scrubbing applicator cleans as it disinfects to save time 1 minute kill time on 54 microorganisms Effective against 5 MRSA strains, 8 CRE strains, and VRE Compatible with materials commonly used in healthcare environments For more information regarding the EPA's List N Disinfectants for Coronavirus (COVID-19) please visit https://www.epa.gov/pesticide-registration/list-n-disinfectants-coronavirus-covid-19Powered by a next generation formulation, protect your patients, staff, and facility from HAIs in just 1 minuteEffective against 55 microorganisms, including C. auris, 5 MRSA strains, 8 CRE strains, VRE, SARS-CoV-2 and 13 multi-drug resistant organisms, in 1 minuteEPA-registered intermediate level disinfectant that is bactericidal, virucidal, fungicidal, tuberculocidalCategorization of pathogens allows for quick identification of relevant efficacy claimsCompatible with a broad range of surfaces and equipment in healthcarePlease refer to the manufacturer's Instructions for Use for additional data regarding claimsWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Manufacturer # P25372 Brand Sani-Cloth® Prime Manufacturer Professional Disposables Country of Origin United States Active Ingredients Didecyl Dimethyl Ammonium Chloride / Ethyl Alcohol / Isopropyl Alcohol Application Surface Disinfectant Cleaner Container Type Canister Dimensions 6 X 6-3/4 Inch Dispensing Method Manual Pull EPA Registration Number 9480-12 Form Wipe Product Dating McKesson Acceptable Dating: we will ship >= 90 days Scent Alcohol Scent Sterility NonSterile Type Premoistened Germicidal UNSPSC Code 42281604 Volume 160 Count

Read more less

Chemical Indicator, strips printed with reactive ink for Plasma or Vaporized Hydrogen Peroxide sterilization processes.Internal Control. Metals Free. Chemdye® CD42 Process Indicators (Type 1 according to ISO 11140-1:2014 standard) are single-use chemical indicators that consist of plastic strips printed with indicator ink. These indicators have been designed to monitor Plasma or Vaporized Hydrogen Peroxide sterilization processes within loads, ensuring an adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. Innovative highly sensitive red ink was developed to turn to yellow when the indicator is exposed to Plasma or Vaporized Hydrogen Peroxide. Endpoint condition: 50 ºC, 6 minutes, 2.3 mg/l H2O2. Indicators 100% free of toxic heavy metals. Instructions For Use: Place a Chemdye® CD42 Process Indicator within each package, bag or tray that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Plasma or Vaporized Hydrogen Peroxide, the ink must turn to the yellow reference color when the sterilization parameters are reached. For reference color, please refer to Result Reference Guide. More Info About This Product: Color Chart

Read more less

CD40 / Multi-variable Chemical Indicator, strips printed with reactive ink for Plasma or Vaporized Hydrogen Peroxide sterilization processes. Control of plasma or vaporized H2O2 sterilization processes. Conditions: 6 minutes, 50 °C, 2,3 mg/l H2O2. Characteristics: Type 4 Chemical Indicator (according to ISO 11140-1). Strips printed with indicator ink. Size: 105 x 18 mm (approximate). Initial color: Purple. Final color: Green. 100 % Toxic Heavy Metals free. Instructions For Use: Place a Chemdye® CD40 Multivariable Process Indicator within each package, bag or tray that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Plasma or Vaporized Hydrogen Peroxide, the ink must turn to the green or lighter reference color when the sterilization parameters are reached. Specifications: Process: Hydrogen peroxide Initial Color: Purple Final Color: Green Indicator Type: Type 4 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

IT26-C / Moving front Chemical Integrator to monitor Steam sterilization processes between 118°C and 138°C. Control of Steam sterilization processes between 118 °C and 138 °C. Characteristics: Type 5 Integrating Indicator (according to ISO 11140-1). Size: 52 mm x 21 mm. Chemical Integrator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of 106 Geobacillus stearothermophilus spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. Optionally, the readout of the chemical indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Carefully open the package and remove only the number of indicators needed. Reseal the package tightly. Place a Integron® IT26-C indicator in each pack, peel pouch, container system or tray to be steam sterilized in the most inaccessible area to sterilizing agent. Perform de sterilization cycle. After the sterilization process has finished, the dark bar should have reached the ACCEPT zone. If the dark bar has not reached the ACCEPT zone, a REJECT result is indicated and the items in the pack, peel pouch, container system, or tray were not exposed to proper steam sterilization conditions. These items should be reprocessed according to established procedures and a new IT26-C has to be used. Despite this, regarding cycle integration parameters, this process can be considered as accepted. In case the IT26-C indicator shows a damp appearance after the sterilization process, Terragene® recommend planning an equipment´s maintenance. Specifications: Process: Steam Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: User Manual

Read more less

IT26-C Extender/ Moving front Chemical Integrator to monitor Steam sterilization processes between 118°C and 138°C. Control of Steam sterilization processes between 118 °C and 138 °C. Characteristics: Type 5 Integrating Indicator (according to ISO 11140-1). Size: 52 mm x 21 mm. Chemical Integrator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of 106 Geobacillus stearothermophilus spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. Optionally, the readout of the chemical indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Carefully open the package and remove only the number of indicators needed. Reseal the package tightly. Place a Integron® IT26-C indicator in each pack, peel pouch, container system or tray to be steam sterilized in the most inaccessible area to sterilizing agent. Perform de sterilization cycle. 4After the sterilization process has finished, the dark bar should have reached the ACCEPT zone. If the dark bar has not reached the ACCEPT zone, a REJECT result is indicated and the items in the pack, peel pouch, container system, or tray were not exposed to proper steam sterilization conditions. These items should be reprocessed according to established procedures and a new IT26-C has to be used. NOTE: In some extended or wet steam cycles, the dark bar can display discoloration in some zones of the reading window, imposing a difficulty for result´s interpretation (see Result Reference Guide for reference). Despite this, regarding cycle integration parameters, this process can be considered as accepted. In case the IT26-C indicator shows a damp appearance after the sterilization process, Terragene® recommend planning an equipment´s maintenance.

Read more less

2 level chemical integrator for Ethylene Oxide sterilization processes. One-side laminated strips. Metals free. Integron® IT12 Chemical Integrators (Type 5 according to ISO 11140-1:2014 standard) are single-use two level chemical indicators that consist of paper strips laminated on the back side and printed with indicator ink. They have been designed for monitoring Ethylene Oxide (EO) sterilization processes. The integration level contains a purple/brown ink which was developed to turn to green when a theoretical spore population reaches its kill time, thus indicating that the SAFE condition has been met. Level 1 – Red: Exposure level. Indicator ink turns yellow to indicate exposition to the process, but does not ensure that the variables required to achieve the integration condition have been achieved (UNSAFE condition). Level 2 – Purple / brown: Integration level. Indicator ink turns green to indicate that the integration condition indicated in the quality certificate has been achieved. This condition consists of the kill time of a theoretical 106 Bacillus atrophaeus spore population, calculated in a BIER (Biological Indicator Evaluator Resistometer), and is called SAFE condition. Indicators 100% free of toxic heavy metals. Instructions For Use: Place a Integron® IT12 Chemical Integrator along with the material to be sterilized in a suitable package according to the recommended sterilization techniques. Place the indicators in those areas of most difficult access to the sterilizing agent. Perform the sterilization cycle. After the sterilization process has finished and evacuation/ventilation process is over, you may:               A. Remove the integrator indicator taking the necessary precaution to avoid                          contact with the remaining sterilizing agent.              B. Ventilate the load together with the integrator indicator and then perform                        the reading. Analyze the results. If the SAFE integration condition has been reached, the        sterilization process has been effective. Specifications: Process: Ethylene Oxide Initial Color: Level 1 Red, Level 2 purple-brown Final Color: Level 1 Yellow, level 2 Green Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

IT26-1YS / Unique point chemical integrator for Steam sterilization processes between 121° C and 134° C. Control of Steam sterilization processes between 121 ºC and 135 ºC. Characteristics: Type 5 Integrator Indicator (according to ISO 11140-1). One-side-laminated strips printed with indicator ink. Size: 70 mm x 23 mm. Initial Color: Yellow. Final Color: Black. 100 % Toxic Heavy Metal free. Instructions For Use: Place a chemical integrator Integron® IT26-1YS within each package, bag or tray that will be sterilized by Steam. In rigid containers place an IT26-1YS in every corner, or at least two diagonally opposite corners, to ensure that steam has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Steam, the ink must turn to the black reference color when the integration conditions are reached. Specifications: Process: Steam Initial Color: Yellow Final Color: Black Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

CDWAH-U / Stainless steel re-usable holder of great resistance and durability. The holder is designed to be fixed on the tray, which allows reproducible location of the cleaning indicator in ultrasonic washing machines. Base: 32,7 mm wide, 72,5 mm long. Designed to hold Chemdye® CDWA cleaning indicators and perform routine control of cleaning processes in ultrasonic washers. Characteristics: Chrome plating SUS304 grade stainless steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72.5 mm long, pin at the back side. The holder is designed to be fixed on the tray, which allows reproducible location of the cleaning indicator in ultrasonic washing machines, without representing a challenge to the washing process. Specifications: Process: Cleaning and thermodisinfection Regulations: ISO/TS 15883-5

Read more less

Holder for cleaning and thermodisinfection Indicators. Stainless Steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72 mm long, pin at the back side. ISO/TS 15883-5. Designed to hold Chemdye® CDWA and Integron® IT27W indicators in order to perform routine control of cleaning and thermal disinfection processes in automatic machines. Characteristics: Chrome plating SUS304 grade stainless steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72.5 mm long, pin at the back side. Basket: 32 mm wide, 37 mm long, 0.5 mm thick. The holder is designed to mimic the cleaning challenges posed by a large process load during the washing cycle and can be fixed on the tray, which allows reproducible location of the cleaning indicator in the washer-disinfector. When CDWA4 is placed within the holder, half of the test soil is obscured, thus simulating the joint of a surgical instrument, with water stream hitting it indirectly. The other half of the test soil is covered by a mesh, thus posing a difficulty for water stream to reach it, mimicking shadowed or occluded surfaces. The new design of CDWAH optimizes the control of the washer disinfectors ability to force water and detergent into and onto the test soil. Specifications: Process: Cleaning and thermodisinfection Regulations: ISO 15883

Read more less

Instructions For Use: Before The Test: Place the holder around the neck of the capsule. Press the holder down so that the groove of the holder fits securely around the neck of the vial. Insert the L shaped end on either side of the holder into the holes of the Ultrasonic device’s basket to hold the vial in position. The holder can be attached to a wire basket or perforated basket. Vials should be placed in the correct location within a tray / basket according to Ultrasonic Cleaning Indicator´s IFU based on the size of the tank. After the test is complete After the ultrasonic cycle remove the vial holding it with three fingers of one hand and the index finger and thumb of the other hand on the holder and lid of capsule. Place the index finger on the end of the holder, then place the thumb on the lid of the capsule for support, push the holder back off the neck of the capsule and remove the holder with both fingers.

Read more less

CDWA4 / Cleaning Indicator for cleaning performance tests. Challenge level: very high. Detects all the factors that affect the result of a washing process. Initial Color: Fuchsia. Result: removal of the fuchsia organic substance. Designed for routine control of cleaning processes and for monitoring automatic washing machines effectiveness as well as monitoring ultrasonic washing machines which operate at frequencies equal to or greater than 35 kHz, and temperatures between 30 ºC and 70 ºC. Characteristics: Challenge Level: Very high. Allows detection of all factors affecting the outcome of cleaning process. Initial Color: Fuchsia. Size: 70 mm x 30 mm (approximate). Synthetic temperature-stable support. Result: Elimination of fuchsia organic substance. To interpret results visually, use the results reference guide on product´s instructions for use. Optionally, the readout of the cleaning indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Choose the Chemdye® Splat CDWA indicator according to the desired difficulty. Place the indicator on the Chemdye® Splat CDWAH or Chemdye® Splat CDWAH-U holder. Place the system on the tray along with the material. Once the cleaning cycle is over, remove the indicator. Analyze Chemdye® Splat CDWA indicators using the reference table and record results. If unfavorable results are obtained, perform the appropriate corrective actions and repeat the washing process. Specifications: Process: Cleaning and thermodisinfection Initial Color: Fuchsia Regulations: ISO 13485, ISO/TS 15883-5

Read more less

Super Rapid Self-contained Biological Indicator for Steam sterilization processes. Geobacillus stearothermophilus (ATCC 7953) 10^6 spores per vial. Readout: 1 hour. An optional visual pH color change confirmation could be made after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to a greenish color first, and then to yellow during incubation at 60 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 1 hour-reading. Fluorescence results may be compared to the 7-day visual reading. Note: if 7-day readout is performed, a humidified environment will be required to avoid medium to dry out. D-Value: Not lower than 1.5 minutes at 121 ºC. Another D-value is informed at 132 ºC and at 135 ºC. Z-Value is informed. Instructions For Use: Identify the Terragene® Bionova® BT222 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT222 SCBI from the sterilized package. WARNING: Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature. Check the Process Indicator on SCBI label. A color change to brown indicates that the SCBI has been exposed to Steam. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the Process Indicator color has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader Incubators for a maximum of 1 hour at (60 ± 2) °C for super rapid readout. Specifications: Process: Steam Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 1 h Regulations: IRAM 37102-1, IRAM 37102-3, ISO 11138-1, ISO 11138-3

Read more less

Rapid Self-contained Biological Indicator for Ethylene Oxide sterilization processes. Bacillus atrophaeus (ATCC 9372) 10^6 spores per vial. Readout: 4 hours. An optional visual pH color change confirmation could be made after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to a greenish color first, and then to yellow during incubation at 37 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain blue after the incubation process. 7-day readout for visual confirmation by color change is optional and not intended to be routinely performed; it is an initial validation of the 4 hour-reading. Fluorescence results may be compared to the 7-day visual reading. Instructions For Use: Identify the Terragene® Bionova® BT110 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT110 SCBI from the sterilized package. Check the Process Indicator on SCBI label. A color change to green indicates that the SCBI has been exposed to Ethylene Oxide. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the color of the Process Indicator has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader incubators for a maximum of 4 hours at (37 ± 2) °C for rapid readout. Note: Holding time between sterilization and incubation should not exceed a 7-day period. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means failure in the sterilization process. If no fluorescence is detected after 4 hours of incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for visual color change. If chamber relative humidity is unknown or < 35 %, continue to incubate the Biological Indicator for a pH color change result, since low relative humidity may increase the fluorescent readout time beyond 4 hours. Specifications: Process: Ethylene Oxide Microorganism: Bacillus atrophaeus (ATCC 9372) Population: 10^6 Spores/carrier Read-Out Time: 4 h Regulations: IRAM 37102-1, IRAM 37102-2, ISO 11138-1, ISO 11138-2 Length: 40 mm

Read more less

Hyper Rapid Self-contained Biological Indicator for Vaporized Hydrogen Peroxide sterilization processes. Final readout: 5 minutes. Indications For Use: Terragene® Bionova® BT98 fluorescence hyper rapid readout Biological Indicators have been designed for quick and easy monitoring of Plasma or vaporized hydrogen Peroxide sterilization cycles. Device Description: Terragene® Bionova® BT98 fluorescence hyper rapid readout Biological Indicators are single-use Self-Contained Biological Indicators (SCBIs) that consist of a polypropylene tube, a spore carrier and a glass ampoule with a culture medium, enclosed with a colored cap. Each tube contains a population of Geobacillus stearotermophilus ATCC 7953 spores inoculated on a spore carrier, a plastic cap with holes and a barrier permeable to Plasma or Vaporized Hydrogen Peroxide. Each BT98 has a Process Indicator on label that changes from purple to green when exposed to hydrogen peroxide. Precautions: Warning: Do not use Terragene® Bionova® BT98 SCBI to control EO, Dry Heat, Formaldehyde or other sterilization processes different from specified. Do not reuse SCBI. Warning:  Place one or more SCBI in sterilizing hard-to-reach areas to ensure all areas of the chamber are sterilized. Please evaluate all load configurations to ensure ALL hard-to-reach areas have been identified, and place a SCBI in each of those locations. Warning:  Do not reuse the sterilizer until the SCBI test result is negative. Instructions For Use: Identify the Terragene® Bionova® BT98 SCBI by writing the sterilizer number (incase of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. Caution Wear safety glasses and gloves when removing the Terragene® Bionova® BT98 SCBI from the sterilized package. ( Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature.) Check the Process Indicator on SCBI label. A color change to green indicates that the SCBI has been exposed to Hydrogen Peroxide. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the color of the Process Indicator has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® auto-reader incubators for a maximum of 5 minutes at (60 ± 2) °C for hyper rapid readout. (Holding time between sterilization and incubation should not exceed a 1-hour period.) Important: Use a non-sterilized SCBI as a positive control at least once per day, when a sterilization cycle is run. The positive control ensures that correct incubation conditions were met; the capability of the medium to promote rapid growth; viability of spores has not been altered due to improper storage temperature, humidity or proximity to chemicals and proper functioning of Terragene® Bionova® Auto-Reader Incubators. Both, the positive control indicator and the processed indicator, should belong to the same batch. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means failure in the sterilization process. If no fluorescence is detected after 5 minutes of incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for visual color change. Record positive results and discard the SCBIs immediately, as it is indicated below. Hyper Rapid Readout: 5 minutes The hyper rapid readout must be carried out in the appropriate Terragene® Bionova® auto-reader incubators. Fluorescence is emitted after the reader stimulates the spore carrier with UV light. Final readout of negative results is readily available after 5 minutes of incubation. Fluorescence readout is an indirect measure of the viability of Geobacillus stearothermophilus spores after the sterilization process (positive results). Furthermore, a failure in the sterilization process can also become evident by culture medium color-change. Due to the high sensitivity of the fluorescence results at 5 minutes, conventional incubation for color change of Terragene® Bionova® SCBI BT98 is not an advantage. Visual Confirmation: 5 days: Optionally, you can perform a visual color-change confirmation after a 5-day incubation. If the sterilization process has not been successful, culture medium will turn to yellow during incubation at (60 ± 2) ºC, indicating the presence of living spores. If sterilization was successful, culture medium will remain purple after incubation. The positive control must show a color change from purple to yellow for results to be valid. ( If 5-day readout is performed, a humidified environment will be required to prevent medium from drying out.) Readout Time: 7 days A 7-day readout is optional and may be routinely performed. This is an initial validation of the 5-minute readout. Fluorescence results are compared to the 7-day visual readouts. Monitoring Frequency: Follow facility policies and procedures which should specify a biological indicator monitoring frequency compliant with professional association recommended practices and/or national guidelines and standards. As the best practice and to provide optimal patient safety, Terragene® recommends that every sterilization load be monitored with an appropriate biological indicator. Storage: Store in a dark place at temperature between 10-30 ºC and 30-80 % relative humidity. Do not freeze. Do not store biological indicators near sterilizing agents or other chemical products. Shelf Life: Biological Indicators have an expiration date of 2 years from the date of manufacture when stored at recommended conditions. Do not use indicators after their expiration date. Chemical Process Indicator on SCBI label have an expiration date of 2 years when used as part of SCBI. Endpoint Stability Reaction: Chemical Process Indicator endpoint shall remain unchanged for a period of 6 months when stored at previously indicated conditions. Disposal: Discard biological indicators after use according to your country’s healthcare and safety regulations. The positive biological indicators can be autoclaved in a gravity air displacement steam sterilizer at 121 ºC for 5 minutes, 132 ºC for 15 minutes or 134 ºC for 10 minutes; or in a dynamic air removal steam sterilizer at 132 °C for 4 minutes or 135 °C for 3 minutes. Specifications: Population: 10^6 Spores/carrier Read-Out Time: 5 min Regulations: IRAM 37102-1:1999, ISO 11138-1:2017, ISO 13485:2016 / NS-EN ISO 13485:2016

Read more less

Ultra Rapid Self-contained Biological Indicator for Steam sterilization processes. Geobacillus stearothermophilus (ATCC 7953) 10^6 spores per vial. Readout: 20 minutes. An optional visual pH color change confirmation could be made after 48 hours of incubation. If the sterilization process has not been successful, the culture medium will change to a greenish color first, and then to yellow during incubation at 60 ºC, thus showing the presence of living spores. If the sterilization process is successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 20 minute-reading. Fluorescence results may be compared to the 7-day visual reading. Note: If 7-day readout is performed, a humidified environment will be required to avoid medium to dry out. D-Value: Not lower than 1.5 minutes at 121 ºC. Another D-value is informed at 132ºC and at 135ºC. Z-Value is informed. Instructions For Use: Identify the Terragene® Bionova® BT224 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT224 SCBI from the sterilized package. (Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature.) 5. Check the Process Indicator on SCBI label. A color change to brown indicates that the SCBI has been exposed to Steam. ( This color change does not evidence the process effectiveness to achieve sterility. If the Process Indicator color has not changed, check the sterilization process.) 6. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. 7. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader Incubators for a maximum of 20 minutes at (60 ± 2) °C for ultra rapid readout. Important: Use a non-sterilized SCBI as a positive control at least once per day, when a sterilization cycle is run. The positive control ensures that correct incubation conditions were met; capability of medium to promote rapid growth; viability of spores has not been altered due to improper storage temperature, humidity or proximity to chemicals and proper functioning of Terragene® Bionova® Auto-Reader Incubators. Both, the positive control indicator and the processed indicator, should belong to the same batch. Note: Holding time between sterilization and incubation should not exceed a 7-day period. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means a failure in the sterilization process. If no fluorescence is detected at 20-minute incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for a visual color change.

Read more less

Super Rapid Self-contained Biological Indicator for Plasma or Vaporized Hydrogen Peroxide Sterilization Processes. Final readout: 30 minutes. An optional visual pH color change confirmation could be performed after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to yellow during incubation at 60 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 30-minute reading. Fluorescence results may be compared to the 7-day visual reading. Note: If 7-day readout is performed, a humidified environment will be required to prevent medium from drying out. Instructions For Use: Identify the Terragene® Bionova® BT96 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT96 SCBI from the sterilized package.( Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature.) Check the Process Indicator on SCBI label. A color change to green indicates that the SCBI has been exposed to Hydrogen Peroxide. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the color of the Process Indicator has not changed, check the sterilization process. 6. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader incubators for a maximum of 30 minutes at (60 ± 2) °C for super rapid readout. Important: Use a non-sterilized SCBI as a positive control at least once per day, when a sterilization cycle is run. The positive control ensures that correct incubation conditions were met; the capability of the medium to promote rapid growth; viability of spores has not been altered due to improper storage temperature, humidity or proximity to chemicals and proper functioning of Terragene® Bionova® Auto-Reader Incubators. Both, the positive control indicator and the processed indicator, should belong to the same batch. Note: Holding time between sterilization and incubation should not exceed a 7-day period. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means failure in the sterilization process. If no fluorescence is detected after 30 minutes of incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for visual color change. Specifications: Process: Hydrogen peroxide Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 30 min Regulations: IRAM 37102-1, ISO 11138-1

Read more less

Indicator Tape for Plasma or Vaporized Hydrogen Peroxide Sterilization Processes. Cintape® CT40 Process Indicators (Type 1 according ISO 11140-1:2014 standard) are single-use chemical indicators that consist of a roll of self-adhesive plastic tape printed with indicator ink. These indicators have been designed to monitor Plasma or Vaporized Hydrogen Peroxide sterilization processes, ensuring adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. The adhesive component of the tape allows the adhesion to different types of packaging and wraps, such as cloth, paper and plastic being easy to remove and leaving no residues. Innovative highly sensitive purple ink was developed to turn to green when the indicator is exposed to Plasma or Vaporized Hydrogen Peroxide. Endpoint condition: 50 ºC, 6 minutes, 2.3 mg/l H2O2. Indicators 100 % free of toxic heavy metals. Instructions For Use: Place within a sterilizer a wrapped package closed with Cintape® CT40 Process Indicator tape that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. Perform the sterilization cycle. After the sterilization process has finished, remove the package from the sterilizer and analyze the indicator results. The indicator must turn to the reference color for considering that it was exposed to Plasma or Vaporized Hydrogen Peroxide. For reference color, please refer to Result Reference Guide. Specifications: Process: Hydrogen Peroxide Initial Color: Purple Final Color: Green Indicator Type: Type 1 chemical indicator Regulations: ISO 11140-1

Read more less

CT22 / Indicator Tape for Steam sterilization processes. Cintape® CT22 Process Indicators (Type 1 according ISO 11140-1:2014 standard) are single-use chemical indicators that consist of a roll of self-adhesive paper tape printed with indicator ink. These indicators have been designed to monitor Steam sterilization processes, ensuring an adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. The adhesive component of the tape allows the adhesion to different types of packaging and wraps, such as cloth, paper and plastic being easy to remove and leaving no residues. Innovative highly sensitive yellow ink was developed to turn to dark brown / black when the indicator is exposed to Steam. Endpoint condition: 121 ºC, 10 minutes; 134 ºC, 2 minutes. Instructions For Use: Place within a sterilizer a wrapped package closed with Cintape® CT22 Process Indicator tape that will be sterilized by Steam. Perform the sterilization cycle. After the sterilization process has finished, remove the package from the sterilizer and analyze the indicator results. The indicator must turn to the reference color for considering that it was exposed to Steam. For reference color, please refer to Result Reference Guide. Specifications: Process: Steam Initial Color: Yellow Final Color: Black, Dark Brown Indicator Type: Type 1 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

KPCD222-C / Test Pack PCD Kit. Process Challenge Device for Steam sterilization processes with moving-front Type 5 Indicator and Bionova® Super Rapid Self-contained Biological Indicator BT222, plus Bionova® BT222 Biological Indicators Positive Control. For routine load release, especially for loads containing implants. For routine sterilizer monitoring. For periodic validation of the sterilizer (after installation, repair, relocation). Detects inadequate air removal and steam penetration in dynamic-airremoval (pre-vacuum) and gravity displacement steam autoclaves between 121-135 ºC. Characteristics: The Kit Consists Of: PCD222-C: Porous cards system holding: A Self-contained Biological Indicator Bionova® BT222. A Type 5 chemical indicator Integron® IT26-C (moving-front integrator). A self-adhesive Record Card, PCDBI-C-RC, where data on sterilization cycle may be written. Self-contained Biological Indicator Bionova® BT222 (to be used as a positive control) Specifications: Initial Color: Blue Final Color: Dark Grey or Black Process: Steam Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 1 h Regulations: ANSI/AAMI ST79, ISO 11138-1, ISO 11138-3 IT26-C Chemical Integrator (within the challenge device) The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. Integration condition is calibrated against the kill time of a 106 G. stearothermophilus ATCC 7953 spores€™ population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. BT222 Super Rapid Self-contained Biological Indicator (within the challenge device): ‰¥106 G. stearothermophilus ATCC 7953 spores per vial in paper carrier. Glass ampoule with growth indicator medium. Label with chemical indicator line printed with Steam reactive ink (Color change: pink to brown)

Read more less

KPCD224-C / Test Pack PCD Kit. Process Challenge Device for Steam sterilization processes with moving-front Type 5 Integrator and Bionova® Ultra Rapid Self-contained Biological Indicator BT224, plus Bionova® BT224 Biological Indicators Positive Control. Class 5 spores per strip. For routine load release, especially for loads containing implants. For routine sterilizer monitoring. For periodic validation of the sterilizer (after installation, repair, relocation). Detects inadequate air removal and steam penetration in dynamic- airremoval (pre-vacuum) and gravity displacement, steam autoclaves between 132-135 ºC. Characteristics: The kit Consists Of: PCD224-C: Porous Cards System Holding: A Self-contained Biological Indicator Bionova® BT224.A Type 5 chemical indicator Integron® IT26-C (moving-front integrator). A self-adhesive Record Card, PCDBI-C-RC, where data on sterilization cycle may be written. Self-contained Biological Indicator Bionova® BT224 (to be used as a positive control) Specifications: Initial Color: Blue. Final Color: Dark Grey or Black. Process: Steam Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 20 min Regulations: ANSI/AAMI ST79, ISO 11138-3, ISO 11140-1 IT26-C Integrator Indicator (within the challenge device): The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. Integration condition is calibrated against the kill time of a 106 G. stearothermophilus ATCC 7953 spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 ºC, 128 ºC, 135 ºC. BT224 Self-contained Ultra Rapid Biological Indicator (within the challenge device): 106 G. stearothermophilus ATCC 7953 spores per vial in paper carrier. Glass ampoule with growth indicator medium. Label with chemical indicator line printed with Steam reactive ink (Color change: pink to brown) Final results: by fluorescence after incubation for 20 minutes at 60 ºC (sensitivity 97%). An optional visual pH color change confirmation could be made after 48 hours of incubation. A 7-day readout is optional to confirm 20-minutes results by color change. Note: If sterilization process was not successful, indicator medium will turn yellow after incubation, thus indicating the presence of living G. stearothermophilus spores. If sterilization process was successful, indicator medium will remain purple after incubation.

Read more less

CD16 / Multi-variable Chemical Indicators, double card strips printed with reactive ink for Ethylene Oxide sterilization processes. Metals Free. Control of Ethylene Oxide (EO) sterilization processes. Conditions: 600 mg/l EO, RH 60%, 30 °C, 30 minutes // 600 mg/l EO, RH 60%, 54 °C, 20 minutes. Characteristics: Type 4 Chemical Indicator (according to ISO 11140-1). Double punched card strips printed with indicator ink. Specifications: Size: 200 x 15 mm. Initial Color: Purple/Brown. Final Color: Green. 100 % Toxic Heavy Metals free. Instructions For Use: Place a Chemdy® CD16 Multivariable Process Indicator within each package, bag or tray that will be sterilized by Ethylene Oxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure mthat the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Ethylene Oxide, the ink must turn to the green reference color when the sterilization parameters are reached. More Info About This Product: Color Chart

Read more less

Multi-variable Chemical Indicator printed with reactive ink for Steam sterilization processes. Chemdye® CD29 Multivariable Process Indicators (Type 4 according to ISO 11140-1:2014 standard) are single-use chemical indicators that consist of one-side laminated punched paper double strips printed with indicator ink. These indicators have been designed to monitor Steam sterilization processes within loads, ensuring an adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. Innovative highly sensitive yellow ink was developed to turn to dark brown/black when the indicator is exposed to Steam considering the critical process variables which provides additional quality assurance. Endpoint condition: 121 °C, 15 minutes; 134 °C, 3.5 minutes. Indicators 100 % free of toxic heavy metals. Instructions For Use: Place a Chemdye® CD29 Multivariable Process Indicator within each package, bag or tray that will be sterilized by Steam. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Steam, the ink must turn to the dark brown/black reference color when the sterilization parameters are reached. For reference color, please refer to Result Reference Guide. Specifications: Process: Steam Initial Color: Yellow Final Color; Black Indicator Type: Type 4 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

ICTP / Incubator Thermal Paper. Accessory for the IC10/20FR and IC10/20FRLCD incubator€™s thermal printer. Thermal Paper specially designed for using with Bionova® IC10/20FR, and Bionova® IC10/20FRLCD Auto-Reader€™s Printer. Specifications: Thermal Paper Roll. Color: white Paper length: 30 m. Paper width: 57 mm. Roll external diameter: 50 mm. Roll internal diameter: 13.4 mm. Its function is to record the final results of biological indicators subjected to sterilization process and quantitative analysis of hygiene monitoring systems at each activated position of IC10/20FR or IC10/20FRLCD, which allows registration into your sterilization record keeping book. Read IC10/20FR or IC10/20FRLCD directions for use, as appropriate.

Read more less

ICTP Mini / Thermal Paper specially designed for using with Bionova® Mini Bio, Bionova® Mini Pro Auto-Reader€™s Printer.Thermal Paper specially designed for using with Bionova® Mini Bio, Bionova® Mini Pro Auto-Reader€™s Printer. Specifications: Thermal Paper Roll. Color: White Paper Length: 4.7 m. Paper Width: 57 mm. Roll External Diameter: 23 mm. Roll Internal Diameter: 13.4 mm. Its function is to record the final results of biological indicators subjected to sterilization process and quantitative analysis of hygiene monitoring systems at each activated position of Bionova® Mini Bio and Mini Pro incubators, which allows record keeping in your sterilization records book. Read Bionova® Mini Bio and Mini Pro directions for use, as appropriate.

Read more less

Ideal for cleaning eye protection gear, glasses and loupes For Glass and Polycarbonate Lenses Anti-static, anti-fog, anti-streaking, dries quickly, does not scratch lenses Each box contains 120 individually wrapped pads Packaged for single use WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Compatible Glass and polycarbonate lenses Safe for use on anti-reflective, UV and glare-free coated lenses Applicator Fast Drying Anti-Static Anti-Fog Anti-Streaking Non-Scratching Latex Not made with natural rubber latex GSI Global Product Classification (GPC): 10000405 – Surface Cleaner Package Size SKU Number Country Individual Packets (120 count) D25431 USA, Canada   Manufacturer # D25431 Brand See Clear® Manufacturer Professional Disposables Country of Origin China Application Lens Cleaning Wipe For Use With For Glass and Polycarbonate Lenses Specifications 5 X 6 Inch, Anti-Static, Anti-Fog, Anti-Streaking UNSPSC Code 47131502  

Read more less

Disinfect needleless access sites prior to use by scrubbing the hub Intuitive prep pad design 1 mL Each box contains 100 pads 5 second scrub time followed by 5 second dry time Manufacturer # B19600 Brand Prevantics® Manufacturer Professional Disposables Country of Origin United States Active Ingredients CHG (Chlorhexidine Gluconate) / Isopropyl Alcohol Application Device Swab Dimensions 1-1/8 X 3-1/8 Inch Number per Pack 10 per pack Packaging Type Individual Packet Scent Alcohol Scent Sterility NonSterile Strength 3.15% / 70% Strength UNSPSC Code 42141504 Volume 1 mL

Read more less