Soft, manageable, no memory wrap with high tensile strength Consistent blue texture for easy identification of punctures or tears Repels water, blood, iodine and saline For use with Steam, EO and Gamma sterilization processes Attributes Brand Name Unipack Size 24 x 24 Sterile No Weight 50.70632 lbs Packaging Packaging 100/PK Inner Packaging 100/PK Case Packaging 100/PK, 10 PK/CS Total Case Quantity 1000 Inner Packaging Barcode D784UPP24241

Read more less

Soft, manageable, no memory wrap with high tensile strength Consistent blue texture for easy identification of punctures or tears Repels water, blood, iodine and saline For use with Steam, EO and Gamma sterilization processes Attributes Brand Name Unipack Size 20 x 20 Sterile No Weight 36.8172 lbs Packaging Packaging 100/PK Inner Packaging 100/PK Case Packaging 100/PK, 10 PK/CS Total Case Quantity 1000 Inner Packaging Barcode D784UPP20201

Read more less

Soft, manageable, no memory wrap with high tensile strength Consistent blue texture for easy identification of punctures or tears Repels water, blood, iodine and saline For use with Steam, EO and Gamma sterilization processes Attributes Brand Name Unipack Size 15 x 15 Sterile No Weight 21.16438 lbs Packaging Packaging 100/PK Inner Packaging 100/PK Case Packaging 100/PK, 10 PK/CS Total Case Quantity 1000 Inner Packaging Barcode D784UPP15151

Read more less

Pre-washed, 100% cotton Highly absorbent All sterile towels are CSR wrapped and have a special corner fold that allows for aseptic presentation into a sterile field 17" X 26" Attributes Brand Name Dukal Size 17" x 26" Color Blue Sterile Yes Weight 15.65282 lbs Packaging Packaging 1/PK, 80 PK/CS Item Packaging 1/PK Case Packaging 80 PK/CS Total Case Quantity 80 Item Packaging Barcode (01)00665973000374 Case Packaging Barcode (01)20665973000378

Read more less

Pre-washed, 100% cotton Highly absorbent All sterile towels are CSR wrapped and have a special corner fold that allows for aseptic presentation into a sterile field 17" X 26" Attributes Brand Name Dukal Size 17" x 26" Color Blue Sterile Yes Weight 13.4482 lbs Packaging Packaging 2/PK, 40 PK/CS Item Packaging 2/PK Case Packaging 40 PK/CS Total Case Quantity 80 Item Packaging Barcode (01)00665973000404 Case Packaging Barcode (01)20665973000408

Read more less

Pre-washed, 100% cotton Highly absorbent All sterile towels are CSR wrapped and have a special corner fold that allows for aseptic presentation into a sterile field 17" X 26" Attributes Brand Name Dukal Size 17" x 26" Color Blue Sterile Yes Weight 11.13334 lbs Packaging Packaging 12/PK, 6 PK/CS Item Packaging 12/PK Case Packaging 6 PK/CS Total Case Quantity 72 Item Packaging Barcode (01)00665973000527 Case Packaging Barcode (01)20665973000521

Read more less

Pre-washed, 100% cotton Highly absorbent All sterile towels are CSR wrapped and have a special corner fold that allows for aseptic presentation into a sterile field 17" X 26" Attributes Brand Name Dukal Size 17" x 26" Color Blue Sterile Yes Weight 12.78681 lbs Packaging Packaging 4/PK, 20 PK/CS Item Packaging 4/PK Case Packaging 20 PK/CS Total Case Quantity 80 Item Packaging Barcode (01)00665973000435 Case Packaging Barcode (01)20665973000439

Read more less

Pre-washed, 100% cotton Highly absorbent All sterile towels are CSR wrapped and have a special corner fold that allows for aseptic presentation into a sterile field 17" X 26" Attributes Brand Name Dukal Size 17" x 26" Color Blue Sterile Yes Weight 12.34589 lbs Packaging Packaging 8/PK, 10 PK/CS Item Packaging 8/PK Case Packaging 10 PK/CS Total Case Quantity 80 Item Packaging Barcode (01)00665973000497 Case Packaging Barcode (01)20665973000491

Read more less

Pre-washed, 100% cotton Highly absorbent All sterile towels are CSR wrapped and have a special corner fold that allows for aseptic presentation into a sterile field 17" X 26" Attributes Brand Name Dukal Size 17" x 26" Color Green Sterile Yes Weight 12.78681 lbs Packaging Packaging 4/PK, 20 PK/CS Item Packaging 4/PK Case Packaging 20 PK/CS Total Case Quantity 80 Item Packaging Barcode (01)00665973000459 Case Packaging Barcode (01)20665973000453

Read more less

Pre-washed, 100% cotton Highly absorbent All sterile towels are CSR wrapped and have a special corner fold that allows for aseptic presentation into a sterile field 17" X 26" Attributes Brand Name Dukal Size 17" x 26" Color White Sterile Yes Weight 12.78681 lbs Packaging Packaging 4/PK, 20 PK/CS Item Packaging 4/PK Case Packaging 20 PK/CS Total Case Quantity 80 Item Packaging Barcode (01)00665973000442 Case Packaging Barcode (01)20665973000446

Read more less

Pre-washed, 100% cotton Highly absorbent All sterile towels are CSR wrapped and have a special corner fold that allows for aseptic presentation into a sterile field 17" X 26" Attributes Brand Name Dukal Size 17" x 26" Color Blue Sterile Yes Weight 11.13334 lbs Packaging Packaging 6/PK, 12 PK/CS Item Packaging 6/PK Case Packaging 12 PK/CS Total Case Quantity 72 Item Packaging Barcode (01)00665973000466 Case Packaging Barcode (01)20665973000460

Read more less

McKesson Chemotherapy Procedure Gown Medium - Packaged: 10 Per Bag, 30 Case Large - Packaged: 10 Per Bag, 30 Case X-Large - Packaged: 10 Per Bag, 30 Case 2X-Large - Packaged: 10 Per Bag, 30 Case Polycoated material delivers durability and protection; soft, spunbound polypropylene is coated with a layer of polyethylene film Secured with ties at waist for added comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide a comfortable fit Full back gowns are rated AAMI 2 Not Made with Natural Rubber Latex 44 Inch Length Meets ASTM requirements for testing parameters for specific hazardous drugs-http://www.usp.org/compounding/general-chapter-hazardous-drugs-handling-healthcare

Read more less

Introducing the Dynarex CSR Wrap - The Ultimate Sterilization Solution! Looking for the perfect disposable fabric wrap to ensure effective sterilization? Look no further than the Dynarex CSR Wrap! Designed using cutting-edge technology and high-quality materials, this wrap is your go-to solution for steam and ethylene oxide (EO) gas sterilization. With its superior non-woven fabric, the Dynarex CSR Wrap offers a range of benefits that set it apart from the competition. Let's explore some of its key features: Efficient Sterilization: The Dynarex CSR Wrap provides an impeccable barrier against air and water-borne bacteria, ensuring that your instruments remain sterilized throughout the process. Tear-Resistant Design: Our wrap is crafted from tear-resistant material, guaranteeing that it can withstand daily handling without compromising its protective properties. Say goodbye to spring-back issues! Unlike traditional muslin wraps, the Dynarex CSR Wrap folds and drapes effortlessly, saving you time and effort. Its non-woven construction ensures that it repels water, blood, and saline, making it an ideal choice for a wide range of medical procedures. We understand that the sterilization process is crucial in maintaining the health and safety of your patients. That's why we have designed our CSR Wrap to meet the highest quality standards. When using our wrap, you can rest easy knowing that your instruments are protected against potential contaminations. Specifications: Material: Non-woven fabric Size: Available in various sizes Compatibility: Suitable for steam and ethylene oxide (EO) gas sterilization Repellence: Water, blood, and saline repellent Invest in the Dynarex CSR Wrap and experience the peace of mind that comes with knowing your sterilization process is efficient and reliable. Order yours today and take your healthcare facility to new heights of excellence! REORDER # Size Qty/Case 4412 12" x 12" 1000 4415 15" x 15" 1000 4420 20" x 20" 500 4424 24" x 24" 500 4430 30" x 30" 250 4436 36" x 36" 250 4440 40" x 40" 250 4445 45" x 45" 250 4448 48" x 48" 100 4454 54" x 54" 100 4472 54" x 72" 100

Read more less

 DEFEND Sterilization Wrap (CSR) conforms easily around various shapes and sizes of cassettes, allowing excellent penetration of various methods of sterilization.  Compatible with steam, ETO and gamma.  Petroleum- and memory-free material with a cloth-like feel.  Available in 12" x 12" Size.

Read more less

Sterilization Wrap CSR DEFEND Dental Sterilization Wrap (CSR) is perfect for general purpose sterilization, as it provides a barrier against air and water-borne bacteria. This CSR wrap conforms easily around various shapes and sizes of cassettes, allowing excellent penetration of various methods of sterilization. Compatible with steam, ETO and gamma. Petroleum- and memory-free material with a cloth-like feel.

Read more less

Sterilization Wrap CSR DEFEND Sterilization Wrap (CSR) is perfect for general purpose sterilization, as it provides a barrier against air and water-borne bacteria. This CSR wrap conforms easily around various shapes and sizes of cassettes, allowing excellent penetration of various methods of sterilization. Compatible with steam, ETO and gamma. Petroleum- and memory-free material with a cloth-like feel.

Read more less

Sterilization Wrap CSR DEFEND Sterilization Wrap (CSR) is perfect for general purpose sterilization, as it provides a barrier against air and water-borne bacteria. This CSR wrap conforms easily around various shapes and sizes of cassettes, allowing excellent penetration of various methods of sterilization. Compatible with steam, ETO and gamma. Petroleum- and memory-free material with a cloth-like feel.

Read more less

 DEFEND Sterilization Wrap (CSR) is perfect for general purpose sterilization, as it provides a barrier against air and water-borne bacteria.  Compatible with steam, ETO and gamma.  Petroleum- and memory-free material with a cloth-like feel.  500 per box.  SW - 2000 - 20" x 20".

Read more less

Comes with white and blue colors that are bonded together - inspect trays easier and faster than ever Superior microbial barrier protection with patented Powerguard technology H500 grade is for heavy instrument sets, retractors and applications where frequent handling occurs - for 13 to 17 lbs tray weight Made from recyclable number 5 polypropylene fabric HALYARD* Sterilization Wraps are intended to be used to enclose another medical device that is to be sterilized by a health care provider using: Pre-vacuum steam at 270°F/132°C for 4 minutes, 100% ethylene oxide (EO) with a concentration of 725-735 mg/L at 131°F/55°C and 40%-80% relative humidity for 60 minutes, Lumen, Non Lumen and Flexible Cycles in the STERIS V-PRO® 1, STERIS V-PRO® 1 Plus and STERIS V-PRO® maX Low Temperature Sterilization Systems, Gravity steam at 250°F/121°C for 30 minutes (25 minute dry time for Models 100, 200 and 300 and 30 minute dry time for Models 400, 500 and 600), and Advanced Sterilization Products STERRAD® Sterilization Systems: STERRAD® 50, 100S and 200, STERRAD® NX [Standard Cycle, Advanced Cycle], STERRAD® 100NX [Standard Cycle, Flex Cycle, EXPRESS Cycle, DUO Cycle) Do not use wrap in dry heat or radiation sterilization methods Specifications Manufacturer O&M Halyard Inc Country of Origin China Application Sterilization Wrap Color White / Blue Grade H500 Layer Dual Layer Material SMS Polypropylene Sterilization Compatibility Steam / EO Gas / Hydrogen Peroxide Usage Disposable

Read more less

Made from fluid-resistant 3-layer protective SMS fabric for maximum breathability, flexibility and strength. The gowns have a patented neck closure, thumb loops and generous waist ties to lend additional versatility and protection.

Read more less

Impervious Gown, Large, Blue, 10/pk, 10pk/cs

Read more less

Impervious Gown, Large, Yellow, 10/pk, 10pk/cs

Read more less

Impervious Gown, Regular, Blue Poly Thumb Loop, 15/bg, 5 bg/cs

Read more less

Impervious Gown, Regular, Blue Poly Thumb Loop, 15/bg, 5 bg/cs

Read more less

Impervious Gown, Regular, White, 10/bg, 5 bg/cs

Read more less

Impervious Gown, X-Large, Blue, 10/pk, 10pk/cs

Read more less

Impervious Gown, X-Large, White, 10/bg, 5 bg/cs

Read more less

Impervious Gown, X-Large, Yellow, 10/pk, 10pk/cs

Read more less

Isolation Gown, Distech, M/L, Yellow, 10/bg, 5bg/cs

Read more less

Isolation Gown, Regular, Blue, 10/bg, 5 bg/cs

Read more less

Isolation Gown, Regular, Yellow, Breathable, 10/bg, 10 bg/cs

Read more less

Isolation Gown, Universal Size, Yellow w/Cuff, 50/cs

Read more less

Isolation Gown, X-Large, Yellow, Breathable, 10/bg, 10 bg/cs

Read more less

Ultra Isolation Gown, Small, White, 10/bg, 10 bg/cs

Read more less

Versagown, Flexneck, SMS, Yellow, Large, 10/pk, 10pk/cs

Read more less

Versagown, Flexneck, SMS, Yellow, X-Large, 10/pk, 10pk/cs

Read more less

Chemical Indicator, strips printed with reactive ink for Plasma or Vaporized Hydrogen Peroxide sterilization processes.Internal Control. Metals Free. Chemdye® CD42 Process Indicators (Type 1 according to ISO 11140-1:2014 standard) are single-use chemical indicators that consist of plastic strips printed with indicator ink. These indicators have been designed to monitor Plasma or Vaporized Hydrogen Peroxide sterilization processes within loads, ensuring an adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. Innovative highly sensitive red ink was developed to turn to yellow when the indicator is exposed to Plasma or Vaporized Hydrogen Peroxide. Endpoint condition: 50 ºC, 6 minutes, 2.3 mg/l H2O2. Indicators 100% free of toxic heavy metals. Instructions For Use: Place a Chemdye® CD42 Process Indicator within each package, bag or tray that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Plasma or Vaporized Hydrogen Peroxide, the ink must turn to the yellow reference color when the sterilization parameters are reached. For reference color, please refer to Result Reference Guide. More Info About This Product: Color Chart

Read more less

CD40 / Multi-variable Chemical Indicator, strips printed with reactive ink for Plasma or Vaporized Hydrogen Peroxide sterilization processes. Control of plasma or vaporized H2O2 sterilization processes. Conditions: 6 minutes, 50 °C, 2,3 mg/l H2O2. Characteristics: Type 4 Chemical Indicator (according to ISO 11140-1). Strips printed with indicator ink. Size: 105 x 18 mm (approximate). Initial color: Purple. Final color: Green. 100 % Toxic Heavy Metals free. Instructions For Use: Place a Chemdye® CD40 Multivariable Process Indicator within each package, bag or tray that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Plasma or Vaporized Hydrogen Peroxide, the ink must turn to the green or lighter reference color when the sterilization parameters are reached. Specifications: Process: Hydrogen peroxide Initial Color: Purple Final Color: Green Indicator Type: Type 4 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

IT26-C / Moving front Chemical Integrator to monitor Steam sterilization processes between 118°C and 138°C. Control of Steam sterilization processes between 118 °C and 138 °C. Characteristics: Type 5 Integrating Indicator (according to ISO 11140-1). Size: 52 mm x 21 mm. Chemical Integrator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of 106 Geobacillus stearothermophilus spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. Optionally, the readout of the chemical indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Carefully open the package and remove only the number of indicators needed. Reseal the package tightly. Place a Integron® IT26-C indicator in each pack, peel pouch, container system or tray to be steam sterilized in the most inaccessible area to sterilizing agent. Perform de sterilization cycle. After the sterilization process has finished, the dark bar should have reached the ACCEPT zone. If the dark bar has not reached the ACCEPT zone, a REJECT result is indicated and the items in the pack, peel pouch, container system, or tray were not exposed to proper steam sterilization conditions. These items should be reprocessed according to established procedures and a new IT26-C has to be used. Despite this, regarding cycle integration parameters, this process can be considered as accepted. In case the IT26-C indicator shows a damp appearance after the sterilization process, Terragene® recommend planning an equipment´s maintenance. Specifications: Process: Steam Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: User Manual

Read more less

IT26-C Extender/ Moving front Chemical Integrator to monitor Steam sterilization processes between 118°C and 138°C. Control of Steam sterilization processes between 118 °C and 138 °C. Characteristics: Type 5 Integrating Indicator (according to ISO 11140-1). Size: 52 mm x 21 mm. Chemical Integrator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of 106 Geobacillus stearothermophilus spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. Optionally, the readout of the chemical indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Carefully open the package and remove only the number of indicators needed. Reseal the package tightly. Place a Integron® IT26-C indicator in each pack, peel pouch, container system or tray to be steam sterilized in the most inaccessible area to sterilizing agent. Perform de sterilization cycle. 4After the sterilization process has finished, the dark bar should have reached the ACCEPT zone. If the dark bar has not reached the ACCEPT zone, a REJECT result is indicated and the items in the pack, peel pouch, container system, or tray were not exposed to proper steam sterilization conditions. These items should be reprocessed according to established procedures and a new IT26-C has to be used. NOTE: In some extended or wet steam cycles, the dark bar can display discoloration in some zones of the reading window, imposing a difficulty for result´s interpretation (see Result Reference Guide for reference). Despite this, regarding cycle integration parameters, this process can be considered as accepted. In case the IT26-C indicator shows a damp appearance after the sterilization process, Terragene® recommend planning an equipment´s maintenance.

Read more less

2 level chemical integrator for Ethylene Oxide sterilization processes. One-side laminated strips. Metals free. Integron® IT12 Chemical Integrators (Type 5 according to ISO 11140-1:2014 standard) are single-use two level chemical indicators that consist of paper strips laminated on the back side and printed with indicator ink. They have been designed for monitoring Ethylene Oxide (EO) sterilization processes. The integration level contains a purple/brown ink which was developed to turn to green when a theoretical spore population reaches its kill time, thus indicating that the SAFE condition has been met. Level 1 – Red: Exposure level. Indicator ink turns yellow to indicate exposition to the process, but does not ensure that the variables required to achieve the integration condition have been achieved (UNSAFE condition). Level 2 – Purple / brown: Integration level. Indicator ink turns green to indicate that the integration condition indicated in the quality certificate has been achieved. This condition consists of the kill time of a theoretical 106 Bacillus atrophaeus spore population, calculated in a BIER (Biological Indicator Evaluator Resistometer), and is called SAFE condition. Indicators 100% free of toxic heavy metals. Instructions For Use: Place a Integron® IT12 Chemical Integrator along with the material to be sterilized in a suitable package according to the recommended sterilization techniques. Place the indicators in those areas of most difficult access to the sterilizing agent. Perform the sterilization cycle. After the sterilization process has finished and evacuation/ventilation process is over, you may:               A. Remove the integrator indicator taking the necessary precaution to avoid                          contact with the remaining sterilizing agent.              B. Ventilate the load together with the integrator indicator and then perform                        the reading. Analyze the results. If the SAFE integration condition has been reached, the        sterilization process has been effective. Specifications: Process: Ethylene Oxide Initial Color: Level 1 Red, Level 2 purple-brown Final Color: Level 1 Yellow, level 2 Green Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

IT26-1YS / Unique point chemical integrator for Steam sterilization processes between 121° C and 134° C. Control of Steam sterilization processes between 121 ºC and 135 ºC. Characteristics: Type 5 Integrator Indicator (according to ISO 11140-1). One-side-laminated strips printed with indicator ink. Size: 70 mm x 23 mm. Initial Color: Yellow. Final Color: Black. 100 % Toxic Heavy Metal free. Instructions For Use: Place a chemical integrator Integron® IT26-1YS within each package, bag or tray that will be sterilized by Steam. In rigid containers place an IT26-1YS in every corner, or at least two diagonally opposite corners, to ensure that steam has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Steam, the ink must turn to the black reference color when the integration conditions are reached. Specifications: Process: Steam Initial Color: Yellow Final Color: Black Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

CDWAH-U / Stainless steel re-usable holder of great resistance and durability. The holder is designed to be fixed on the tray, which allows reproducible location of the cleaning indicator in ultrasonic washing machines. Base: 32,7 mm wide, 72,5 mm long. Designed to hold Chemdye® CDWA cleaning indicators and perform routine control of cleaning processes in ultrasonic washers. Characteristics: Chrome plating SUS304 grade stainless steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72.5 mm long, pin at the back side. The holder is designed to be fixed on the tray, which allows reproducible location of the cleaning indicator in ultrasonic washing machines, without representing a challenge to the washing process. Specifications: Process: Cleaning and thermodisinfection Regulations: ISO/TS 15883-5

Read more less

Holder for cleaning and thermodisinfection Indicators. Stainless Steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72 mm long, pin at the back side. ISO/TS 15883-5. Designed to hold Chemdye® CDWA and Integron® IT27W indicators in order to perform routine control of cleaning and thermal disinfection processes in automatic machines. Characteristics: Chrome plating SUS304 grade stainless steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72.5 mm long, pin at the back side. Basket: 32 mm wide, 37 mm long, 0.5 mm thick. The holder is designed to mimic the cleaning challenges posed by a large process load during the washing cycle and can be fixed on the tray, which allows reproducible location of the cleaning indicator in the washer-disinfector. When CDWA4 is placed within the holder, half of the test soil is obscured, thus simulating the joint of a surgical instrument, with water stream hitting it indirectly. The other half of the test soil is covered by a mesh, thus posing a difficulty for water stream to reach it, mimicking shadowed or occluded surfaces. The new design of CDWAH optimizes the control of the washer disinfectors ability to force water and detergent into and onto the test soil. Specifications: Process: Cleaning and thermodisinfection Regulations: ISO 15883

Read more less

Instructions For Use: Before The Test: Place the holder around the neck of the capsule. Press the holder down so that the groove of the holder fits securely around the neck of the vial. Insert the L shaped end on either side of the holder into the holes of the Ultrasonic device’s basket to hold the vial in position. The holder can be attached to a wire basket or perforated basket. Vials should be placed in the correct location within a tray / basket according to Ultrasonic Cleaning Indicator´s IFU based on the size of the tank. After the test is complete After the ultrasonic cycle remove the vial holding it with three fingers of one hand and the index finger and thumb of the other hand on the holder and lid of capsule. Place the index finger on the end of the holder, then place the thumb on the lid of the capsule for support, push the holder back off the neck of the capsule and remove the holder with both fingers.

Read more less

CDWA4 / Cleaning Indicator for cleaning performance tests. Challenge level: very high. Detects all the factors that affect the result of a washing process. Initial Color: Fuchsia. Result: removal of the fuchsia organic substance. Designed for routine control of cleaning processes and for monitoring automatic washing machines effectiveness as well as monitoring ultrasonic washing machines which operate at frequencies equal to or greater than 35 kHz, and temperatures between 30 ºC and 70 ºC. Characteristics: Challenge Level: Very high. Allows detection of all factors affecting the outcome of cleaning process. Initial Color: Fuchsia. Size: 70 mm x 30 mm (approximate). Synthetic temperature-stable support. Result: Elimination of fuchsia organic substance. To interpret results visually, use the results reference guide on product´s instructions for use. Optionally, the readout of the cleaning indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Choose the Chemdye® Splat CDWA indicator according to the desired difficulty. Place the indicator on the Chemdye® Splat CDWAH or Chemdye® Splat CDWAH-U holder. Place the system on the tray along with the material. Once the cleaning cycle is over, remove the indicator. Analyze Chemdye® Splat CDWA indicators using the reference table and record results. If unfavorable results are obtained, perform the appropriate corrective actions and repeat the washing process. Specifications: Process: Cleaning and thermodisinfection Initial Color: Fuchsia Regulations: ISO 13485, ISO/TS 15883-5

Read more less

Super Rapid Self-contained Biological Indicator for Steam sterilization processes. Geobacillus stearothermophilus (ATCC 7953) 10^6 spores per vial. Readout: 1 hour. An optional visual pH color change confirmation could be made after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to a greenish color first, and then to yellow during incubation at 60 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 1 hour-reading. Fluorescence results may be compared to the 7-day visual reading. Note: if 7-day readout is performed, a humidified environment will be required to avoid medium to dry out. D-Value: Not lower than 1.5 minutes at 121 ºC. Another D-value is informed at 132 ºC and at 135 ºC. Z-Value is informed. Instructions For Use: Identify the Terragene® Bionova® BT222 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT222 SCBI from the sterilized package. WARNING: Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature. Check the Process Indicator on SCBI label. A color change to brown indicates that the SCBI has been exposed to Steam. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the Process Indicator color has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader Incubators for a maximum of 1 hour at (60 ± 2) °C for super rapid readout. Specifications: Process: Steam Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 1 h Regulations: IRAM 37102-1, IRAM 37102-3, ISO 11138-1, ISO 11138-3

Read more less

Rapid Self-contained Biological Indicator for Ethylene Oxide sterilization processes. Bacillus atrophaeus (ATCC 9372) 10^6 spores per vial. Readout: 4 hours. An optional visual pH color change confirmation could be made after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to a greenish color first, and then to yellow during incubation at 37 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain blue after the incubation process. 7-day readout for visual confirmation by color change is optional and not intended to be routinely performed; it is an initial validation of the 4 hour-reading. Fluorescence results may be compared to the 7-day visual reading. Instructions For Use: Identify the Terragene® Bionova® BT110 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT110 SCBI from the sterilized package. Check the Process Indicator on SCBI label. A color change to green indicates that the SCBI has been exposed to Ethylene Oxide. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the color of the Process Indicator has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader incubators for a maximum of 4 hours at (37 ± 2) °C for rapid readout. Note: Holding time between sterilization and incubation should not exceed a 7-day period. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means failure in the sterilization process. If no fluorescence is detected after 4 hours of incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for visual color change. If chamber relative humidity is unknown or < 35 %, continue to incubate the Biological Indicator for a pH color change result, since low relative humidity may increase the fluorescent readout time beyond 4 hours. Specifications: Process: Ethylene Oxide Microorganism: Bacillus atrophaeus (ATCC 9372) Population: 10^6 Spores/carrier Read-Out Time: 4 h Regulations: IRAM 37102-1, IRAM 37102-2, ISO 11138-1, ISO 11138-2 Length: 40 mm

Read more less