McKesson Patient Lift 450 lbs. Weight Capacity Battery Powered Features McKesson Battery-Powered Patient Lift Designed to allow attendant to ergonomically transfer a patient from one resting position to another Heavy-gauge construction and 6-point cradle design provides maximum strength to raise and lower individuals weighing up to 450 lbs. Base legs adjust easily and lock securely into open position with padded shifter handles Foldable mast and base for easy storage and transportation and use when limited space is available Jumbo actuator pump with emergency button allows attendant to switch to manual mode to ensure safe repositioning Removable, rechargeable battery allows AC plug-in and charging station capabilities Audible warning notifies when battery power falls below 50% Dual casters and a wide base enhance stability Ideal for homecare use Includes external charger and wall-mount bracket for charging station For use with 2- or 4-point slings (sold separately) Packaged: Each WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Read more less

McKesson Knocked Down Bariatric Bath Transfer Bench 500 lbs. Weight Capacity Features McKesson Gait Belt Aid in patient handling and mobility Delrin buckle made of 100% nylon—quick release nylon buckle Pastel Stripes Machine washable Not Made with Natural Rubber Latex Packaged: 48 Per Case

Read more less

McKesson Knocked Down Bariatric Bath Transfer Bench 500 lbs. Weight Capacity Application Knocked Down Bariatric Bath Transfer Bench Frame Material Aluminum Frame HCPCS E0248 UNSPSC Code 42211617 Weight Capacity 500 lbs. Weight Capacity

Read more less

Transfer Sheet McKesson White 40 X 80 Inch 14 Handles Features McKesson Portable Transport Stretcher Transports, transfers, or rescues patients from areas that are inaccessible to standard stretchers Lightweight transport sheet provides an ideal on-hand solution for emergency personnel (1.5 lbs) Durable materials reinforced with straps to allow as few as four people to safely lift patients weighing up to 1,000 lbs Flexible and fluid-resistant nonwoven/poly construction Portable design easily folds away requiring minimal storage space Features 14 handles with 6 on each side of the 80-inch length and one on each of the 40-inch ends 40 X 80 inch (101.6 cm x 203.2 cm) Disposable design can be used multiple times but should be discarded if the unit is punctured, torn, frayed, or excessively worn Not Made with Natural Rubber Latex Packaged: 10 Bags Per Case

Read more less

McKesson Backboard / Stretcher Strap - Black Features McKesson Backboard / Stretcher Strap - Black Application Backboard / Stretcher Strap For Use With For Backboard / Stretcher Specifications 2-Piece / Black / 5 Foot / 2 Inch Nylon / Speed Clip

Read more less

McKesson Backboard Strap System Features McKesson Backboard Strap System Two "suspender" type over-the-shoulder straps No choking "V" by patients neck

Read more less

McKesson Backboard / Stretcher Strap - Burgundy Features McKesson Backboard / Stretcher Strap - Burgundy Application Backboard / Stretcher Strap For Use With For Backboard / Stretcher Specifications 2-Piece / Burgundy / 7 Foot / 2 Inch Nylon / Regular Clip with Loop Ends

Read more less

McKesson Speed Clip Strap Features McKSpeed Clip Strap Designed for spine boards with pins Clips are chrome plated metal and swivel Application Speed Clip Strap HCPCS E0710 Specifications 2-Piece / Orange / 72 Inch / Nylon

Read more less

McKesson Backboard / Stretcher Strap - Blue Features McKesson Backboard / Stretcher Strap - Blue Application Backboard / Stretcher Strap For Use With For Backboard / Stretcher HCPCS E0710 Specifications 1-Piece / Blue / 9 Foot / Disposable / 2 Inch Polypropylene Webbing / Plastic Side Release Buckle / X-ray Translucent

Read more less

McKesson Backboard / Stretcher Strap Features McKesson Backboard / Stretcher Strap - Black Application Backboard / Stretcher Strap For Use With For Backboard / Stretcher HCPCS E0710 Specifications 2-Piece / Black / 5 Foot / Disposable / 2 Inch Polypropylene Webbing / Plastic Side Release Buckle / X-ray Translucent

Read more less

McKesson Backboard / Stretcher Strap Features McKesson Backboard / Stretcher Strap - Orange Manufacturer McKesson Brand Country of Origin United States Alternate Manufacturer Number 82352 Application Backboard / Stretcher Strap For Use With For Backboard / Stretcher HCPCS E0710 Specifications 2-Piece / Orange / 5 Foot / Disposable / 2 Inch Polypropylene Webbing / Plastic Side Release Buckle / X-ray Translucent

Read more less

McKesson Crutch Tip Features McKesson Crutch Tips Replacement tips used to revitalize crutch and extend the lifetime of the mobility aid Fit crutches with 7/8 inch tubing diameters Safely replace old and worn out tips Easy-to-install design Strong and durable rubber construction Rubber tip provides strong grip and floor protection Crutch tip design features internal disc to help prevent crutch penetration FSA (Flexible Spending Account) eligible Individually packaged for retail use Not Made with Natural Rubber Latex Packaged: 1 Pair Per Box, 10 Boxes Per Case

Read more less

McKesson Cane / Crutch Tip Features McKesson Cane/Crutch Tip Replacement tips used to revitalize cane or crutch and extend the lifetime of the mobility aid Fit most canes and crutches with 7/8 inch tubing diameters Safely replace old and worn out tips Easy-to-install design Strong and durable rubber construction Rubber tip provides strong grip and floor protection FSA (Flexible Spending Account) eligible Individually packaged for retail use Not Made with Natural Rubber Latex Packaged: 1 Pair Per Box, 8 Boxes Per Case

Read more less

McKesson Walker Caddy Features McKesson Walker Caddy Allows walker user to carry personal items from room-to-room safely and securely Includes adjustment clips to help attach to walker Easily attaches with side clips Raised sides to avoid of items rolling off of tray Includes a removable top that conceals personal items Includes top tray with molded cup holder to serve as an eating surface without requiring user to relocate to a table Removal top to conceal, carry, and store personal items Made of easy-to-clean, durable plastic Individually packaged for retail use FSA (Flexible Spending Account) eligible Not Made with Natural Rubber Latex Packaged: 1 Each, 3 Per Case

Read more less

McKesson Small Base Quad Cane Tips Replacement tips used to revitalize cane and extend the lifetime of the mobility aid Fit small base quad canes with 1/2 inch tubing diameters Safely replace old, worn out, or lost tips Easy-to-install design Strong and durable rubber construction Rubber tip provides strong grip and floor protection FSA (Flexible Spending Account) eligible Individually packaged for retail use Not Made with Natural Rubber Latex Packaged: 4 Each Per Box, 10 Boxes Per Case

Read more less

McKesson 4-Point Cane Tip Features McKesson Small Base Quad Cane Tips Replacement tips used to revitalize cane and extend the lifetime of the mobility aid Fit small base quad canes with 1/2 inch tubing diameters Safely replace old, worn out, or lost tips Easy-to-install design Strong and durable rubber construction Rubber tip provides strong grip and floor protection FSA (Flexible Spending Account) eligible Individually packaged for retail use Not Made with Natural Rubber Latex Packaged: 4 Each Per Box, 10 Boxes Per Case

Read more less

McKesson Cane Tip Features McKesson Cane Tip Replacement tip used to revitalize cane and extend the lifetime of the mobility aid Fits most canes with 3/4 inch tubing diameters Safely replaces old and worn out tips Easy-to-install design Strong and durable rubber construction Rubber tip provides strong grip and floor protection FSA (Flexible Spending Account) eligible Individually packaged for retail use Not Made with Natural Rubber Latex Packaged: 10 Per Case

Read more less

McKesson Cane Tip Features McKesson Small Base Quad Cane Tips Replacement tips used to revitalize cane and extend the lifetime of the mobility aid Fit small base quad canes with 1/2 inch tubing diameters Safely replace old, worn out, or lost tips Easy-to-install design Strong and durable rubber construction Rubber tip provides strong grip and floor protection FSA (Flexible Spending Account) eligible Individually packaged for retail use Not Made with Natural Rubber Latex Packaged: 4 Each Per Box, 10 Boxes Per Case

Read more less

McKesson Corded Fall Prevention Monitor Features McKesson Corded Fall Prevention Monitor 1 year warranty Safety Auto-Reset function automatically silences and resets the alarm. No Unsafe Off switch – prevents resident tampering. Raised Visual Status light enabling caregiver to see alarm from a distance. Patented Pad Lost notification – alerts caregiver if connection between the sensor pad and the exit-alarm monitor becomes disconnected. Battery operated (3-AA not included) or optional AC adapter (AC-05). Low Battery notification – Light will flash to alert caregivers that the batteries are becoming low in the fall monitor. Nurse call capability – a nurse call adapter allows for use with a hardwired nurse call system, alerting caregivers through an existing nurse call system. Adjustable volume – features full range volume control. Cord protection – wraps through protective boot, reducing damage to sensor pad. Multiple alarm tones. Rubber boot. Not made with natural rubber latex. Packaged: 72 Units Per Case WARNING: This product can expose you to bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Read more less

McKesson Tennis Ball Walker Glides Features McKesson Tennis Ball Walker Glides Provides a quiet, smooth, and durable glide experience on most surfaces Easy-to-install, tool-free design to conveniently slide over the bottom of the walker leg Includes additional pair of glide pads Glide pads may be replaced to extend the life of the glides Designed to fit any walker FSA (Flexible Spending Account)-eligible Individually packaged for retail use Not Made with Natural Rubber Latex Packaged: 1 Pair Per Box, 10 Pairs Per Case

Read more less

McKesson Glide Ski Features McKesson Walker Glide Skis Ideal mobility aid solution provides smooth transportation over most surfaces Durable composite construction ensures long life Easily added to walker For use with all 1" folding walkers For use with all McKesson and most leading manufacturers walkers FSA (Flexible Spending Account)-eligible Individually packaged for retail use Not Made with Natural Rubber Latex Packaged: 1 Pair Per Box, 10 Pairs Per Case

Read more less

McKesson Commode Bucket Features McKesson Commode Bucket Replacement commode bucket For use with most commodes Includes lid and easy to grip handle for easy transport Constructed of durable plastic FSA-eligible Not Made with Natural Rubber Latex Packaged: 12 Per Case

Read more less

McKesson Walker Wheel Features McKesson Universal Walker Wheels Converts most traditional walkers to wheeled-style for enhanced mobility Includes (2) caster wheels to convert traditional walkers into an enhanced rolling solution Rubber wheels allow user to easily maintain a smooth roll over irregular surfaces Allows (8) 1-inch height adjustments Easily installs by replacing original leg columns Not Made with Natural Rubber Latex Packaged: 1 Pair Per Box, 25 Pairs Per Case

Read more less

Passive Safety Needle Shield slides into place as needle is pulled out of catheter: Aids in prevention of needlestick injuries Manufacturer # 4251128-02 Brand Introcan Safety® 3 Manufacturer B. Braun Country of Origin Unknown Application Closed IV Catheter Catheter Length 1 Inch Catheter Material Polyurethane Color Code Blue Flow Rate 35 mL / min Gauge 22 Gauge Hub Material Plastic Hub Hub Type Winged Hub NDC Number 80210000735 Needle Material Stainless Steel Needle Point Style Universal Bevel Number of Ports Without Port Port Type Without Port Safety Feature Sliding Safety Needle Sterility Sterile UNSPSC Code 42221512 Usage Disposable X-Ray Compatibility Radiopaque

Read more less

Passive Safety Needle Shield slides into place as needle is pulled out of catheter: Aids in prevention of needlestick injuries Manufacturer # 4251127-02 Brand Introcan Safety® 3 Manufacturer B. Braun Country of Origin Unknown Application Closed IV Catheter Catheter Length 0.75 Inch Catheter Material Polyurethane Color Code Yellow Flow Rate 22 mL / min Gauge 24 Gauge Hub Material Plastic Hub Hub Type Winged Hub NDC Number 80210000734 Needle Material Stainless Steel Needle Point Style Universal Bevel Number of Ports Without Port Port Type Without Port Safety Feature Sliding Safety Needle Sterility Sterile UNSPSC Code 42221512 Usage Disposable X-Ray Compatibility Radiopaque

Read more less

Passive Safety Needle Shield slides into place as needle is pulled out of catheter: Aids in prevention of needlestick injuries Manufacturer # 4251129-02 Brand Introcan Safety® 3 Manufacturer B. Braun Country of Origin Unknown Application Closed IV Catheter Catheter Length 1 Inch Catheter Material Polyurethane Color Code Pink Flow Rate 65 mL / min Gauge 20 Gauge Hub Material Plastic Hub Hub Type Winged Hub NDC Number 80210000736 Needle Material Stainless Steel Needle Point Style Universal Bevel Number of Ports Without Port Port Type Without Port Safety Feature Sliding Safety Needle Sterility Sterile UNSPSC Code 42221512 Usage Disposable X-Ray Compatibility Radiopaque

Read more less

Passive Safety Needle Shield slides into place as needle is pulled out of catheter: Aids in prevention of needlestick injuries Manufacturer # 4251131-02 Brand Introcan Safety® 3 Manufacturer B. Braun Country of Origin Unknown Application Closed IV Catheter Catheter Length 1.25 Inch Catheter Material Polyurethane Color Code Green Flow Rate 105 mL / min Gauge 18 Gauge HCPCS C1751 Hub Material Plastic Hub Hub Type Winged Hub NDC Number 80210000738 Needle Material Stainless Steel Needle Point Style Universal Bevel Number of Ports Without Port Port Type Without Port Safety Feature Sliding Safety Needle Sterility Sterile UNSPSC Code 42221512 Usage Disposable X-Ray Compatibility Radiopaque

Read more less

Passive Safety Needle Shield slides into place as needle is pulled out of catheter: Aids in prevention of needlestick injuries Manufacturer # 4251130-02 Brand Introcan Safety® 3 Manufacturer B. Braun Country of Origin Unknown Application Closed IV Catheter Catheter Length 1.25 Inch Catheter Material Polyurethane Color Code Pink Flow Rate 60 mL / min Gauge 20 Gauge Hub Material Plastic Hub Hub Type Winged Hub NDC Number 80210000737 Needle Material Stainless Steel Needle Point Style Universal Bevel Number of Ports Without Port Port Type Without Port Safety Feature Sliding Safety Needle Sterility Sterile UNSPSC Code 42221512 Usage Disposable X-Ray Compatibility Radiopaque

Read more less

Passive Safety Needle Shield slides into place as needle is pulled out of catheter: Aids in prevention of needlestick injuries Manufacturer # 4251136-02 Brand Introcan Safety® 3 Manufacturer B. Braun Country of Origin Unknown Application Closed IV Catheter Catheter Length 1 - 3/10 Inch Catheter Material Polyurethane Color Code Purple Flow Rate 195 mL / min Gauge 16 Gauge Hub Material Plastic Hub Hub Type Winged Hub Needle Material Stainless Steel Needle Point Style Universal Bevel Number of Ports Without Port Port Type Without Port Safety Feature Sliding Safety Needle Sterility Sterile UNSPSC Code 42221512 Usage Disposable X-Ray Compatibility Radiopaque

Read more less

Passive Safety Needle Shield slides into place as needle is pulled out of catheter: Aids in prevention of needlestick injuries Manufacturer # 4251133-02 Brand Introcan Safety® 3 Manufacturer B. Braun Country of Origin Unknown Application Closed IV Catheter Catheter Length 2 Inch Catheter Material Polyurethane Color Code Purple Flow Rate 185 mL / min Gauge 16 Gauge Hub Material Plastic Hub Hub Type Winged Hub Needle Material Stainless Steel Needle Point Style Universal Bevel Number of Ports Without Port Port Type Without Port Safety Feature Sliding Safety Needle Sterility Sterile UNSPSC Code 42221512 Usage Disposable X-Ray Compatibility Radiopaque

Read more less

Passive Safety Needle Shield slides into place as needle is pulled out of catheter: Aids in prevention of needlestick injuries Manufacturer # 4251132-02 Brand Introcan Safety® 3 Manufacturer B. Braun Country of Origin Unknown Application Closed IV Catheter Catheter Length 1.75 Inch Catheter Material Polyurethane Color Code Green Flow Rate 95 mL / min Gauge 18 Gauge Hub Material Plastic Hub Hub Type Winged Hub NDC Number 80210000870 Needle Material Stainless Steel Needle Point Style Universal Bevel Number of Ports Without Port Port Type Without Port Safety Feature Sliding Safety Needle Sterility Sterile UNSPSC Code 42221512 Usage Disposable X-Ray Compatibility Radiopaque

Read more less

Manufacturer # 383512 Brand Nexiva™ Manufacturer BD Country of Origin Unknown Application Closed IV Catheter Catheter Length 1 Inch Catheter Material Vialon Biomaterial Color Code Blue Flow Rate 33 mL / min Gauge 22 Gauge HCPCS C1751 Hub Material Plastic Hub Hub Type Winged Hub Needle Material Stainless Steel Number of Ports Single Port Port Type Needleless Connector Safety Feature Sliding Safety Needle Tubing Diameter 1.2 mm ID UNSPSC Code 42221512 X-Ray Compatibility Radiopaque

Read more less

Chemical Indicator, strips printed with reactive ink for Plasma or Vaporized Hydrogen Peroxide sterilization processes.Internal Control. Metals Free. Chemdye® CD42 Process Indicators (Type 1 according to ISO 11140-1:2014 standard) are single-use chemical indicators that consist of plastic strips printed with indicator ink. These indicators have been designed to monitor Plasma or Vaporized Hydrogen Peroxide sterilization processes within loads, ensuring an adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. Innovative highly sensitive red ink was developed to turn to yellow when the indicator is exposed to Plasma or Vaporized Hydrogen Peroxide. Endpoint condition: 50 ºC, 6 minutes, 2.3 mg/l H2O2. Indicators 100% free of toxic heavy metals. Instructions For Use: Place a Chemdye® CD42 Process Indicator within each package, bag or tray that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Plasma or Vaporized Hydrogen Peroxide, the ink must turn to the yellow reference color when the sterilization parameters are reached. For reference color, please refer to Result Reference Guide. More Info About This Product: Color Chart

Read more less

CD40 / Multi-variable Chemical Indicator, strips printed with reactive ink for Plasma or Vaporized Hydrogen Peroxide sterilization processes. Control of plasma or vaporized H2O2 sterilization processes. Conditions: 6 minutes, 50 °C, 2,3 mg/l H2O2. Characteristics: Type 4 Chemical Indicator (according to ISO 11140-1). Strips printed with indicator ink. Size: 105 x 18 mm (approximate). Initial color: Purple. Final color: Green. 100 % Toxic Heavy Metals free. Instructions For Use: Place a Chemdye® CD40 Multivariable Process Indicator within each package, bag or tray that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Plasma or Vaporized Hydrogen Peroxide, the ink must turn to the green or lighter reference color when the sterilization parameters are reached. Specifications: Process: Hydrogen peroxide Initial Color: Purple Final Color: Green Indicator Type: Type 4 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

IT26-C / Moving front Chemical Integrator to monitor Steam sterilization processes between 118°C and 138°C. Control of Steam sterilization processes between 118 °C and 138 °C. Characteristics: Type 5 Integrating Indicator (according to ISO 11140-1). Size: 52 mm x 21 mm. Chemical Integrator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of 106 Geobacillus stearothermophilus spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. Optionally, the readout of the chemical indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Carefully open the package and remove only the number of indicators needed. Reseal the package tightly. Place a Integron® IT26-C indicator in each pack, peel pouch, container system or tray to be steam sterilized in the most inaccessible area to sterilizing agent. Perform de sterilization cycle. After the sterilization process has finished, the dark bar should have reached the ACCEPT zone. If the dark bar has not reached the ACCEPT zone, a REJECT result is indicated and the items in the pack, peel pouch, container system, or tray were not exposed to proper steam sterilization conditions. These items should be reprocessed according to established procedures and a new IT26-C has to be used. Despite this, regarding cycle integration parameters, this process can be considered as accepted. In case the IT26-C indicator shows a damp appearance after the sterilization process, Terragene® recommend planning an equipment´s maintenance. Specifications: Process: Steam Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: User Manual

Read more less

IT26-C Extender/ Moving front Chemical Integrator to monitor Steam sterilization processes between 118°C and 138°C. Control of Steam sterilization processes between 118 °C and 138 °C. Characteristics: Type 5 Integrating Indicator (according to ISO 11140-1). Size: 52 mm x 21 mm. Chemical Integrator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of 106 Geobacillus stearothermophilus spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. Optionally, the readout of the chemical indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Carefully open the package and remove only the number of indicators needed. Reseal the package tightly. Place a Integron® IT26-C indicator in each pack, peel pouch, container system or tray to be steam sterilized in the most inaccessible area to sterilizing agent. Perform de sterilization cycle. 4After the sterilization process has finished, the dark bar should have reached the ACCEPT zone. If the dark bar has not reached the ACCEPT zone, a REJECT result is indicated and the items in the pack, peel pouch, container system, or tray were not exposed to proper steam sterilization conditions. These items should be reprocessed according to established procedures and a new IT26-C has to be used. NOTE: In some extended or wet steam cycles, the dark bar can display discoloration in some zones of the reading window, imposing a difficulty for result´s interpretation (see Result Reference Guide for reference). Despite this, regarding cycle integration parameters, this process can be considered as accepted. In case the IT26-C indicator shows a damp appearance after the sterilization process, Terragene® recommend planning an equipment´s maintenance.

Read more less

2 level chemical integrator for Ethylene Oxide sterilization processes. One-side laminated strips. Metals free. Integron® IT12 Chemical Integrators (Type 5 according to ISO 11140-1:2014 standard) are single-use two level chemical indicators that consist of paper strips laminated on the back side and printed with indicator ink. They have been designed for monitoring Ethylene Oxide (EO) sterilization processes. The integration level contains a purple/brown ink which was developed to turn to green when a theoretical spore population reaches its kill time, thus indicating that the SAFE condition has been met. Level 1 – Red: Exposure level. Indicator ink turns yellow to indicate exposition to the process, but does not ensure that the variables required to achieve the integration condition have been achieved (UNSAFE condition). Level 2 – Purple / brown: Integration level. Indicator ink turns green to indicate that the integration condition indicated in the quality certificate has been achieved. This condition consists of the kill time of a theoretical 106 Bacillus atrophaeus spore population, calculated in a BIER (Biological Indicator Evaluator Resistometer), and is called SAFE condition. Indicators 100% free of toxic heavy metals. Instructions For Use: Place a Integron® IT12 Chemical Integrator along with the material to be sterilized in a suitable package according to the recommended sterilization techniques. Place the indicators in those areas of most difficult access to the sterilizing agent. Perform the sterilization cycle. After the sterilization process has finished and evacuation/ventilation process is over, you may:               A. Remove the integrator indicator taking the necessary precaution to avoid                          contact with the remaining sterilizing agent.              B. Ventilate the load together with the integrator indicator and then perform                        the reading. Analyze the results. If the SAFE integration condition has been reached, the        sterilization process has been effective. Specifications: Process: Ethylene Oxide Initial Color: Level 1 Red, Level 2 purple-brown Final Color: Level 1 Yellow, level 2 Green Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

IT26-1YS / Unique point chemical integrator for Steam sterilization processes between 121° C and 134° C. Control of Steam sterilization processes between 121 ºC and 135 ºC. Characteristics: Type 5 Integrator Indicator (according to ISO 11140-1). One-side-laminated strips printed with indicator ink. Size: 70 mm x 23 mm. Initial Color: Yellow. Final Color: Black. 100 % Toxic Heavy Metal free. Instructions For Use: Place a chemical integrator Integron® IT26-1YS within each package, bag or tray that will be sterilized by Steam. In rigid containers place an IT26-1YS in every corner, or at least two diagonally opposite corners, to ensure that steam has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Steam, the ink must turn to the black reference color when the integration conditions are reached. Specifications: Process: Steam Initial Color: Yellow Final Color: Black Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

CDWAH-U / Stainless steel re-usable holder of great resistance and durability. The holder is designed to be fixed on the tray, which allows reproducible location of the cleaning indicator in ultrasonic washing machines. Base: 32,7 mm wide, 72,5 mm long. Designed to hold Chemdye® CDWA cleaning indicators and perform routine control of cleaning processes in ultrasonic washers. Characteristics: Chrome plating SUS304 grade stainless steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72.5 mm long, pin at the back side. The holder is designed to be fixed on the tray, which allows reproducible location of the cleaning indicator in ultrasonic washing machines, without representing a challenge to the washing process. Specifications: Process: Cleaning and thermodisinfection Regulations: ISO/TS 15883-5

Read more less

Holder for cleaning and thermodisinfection Indicators. Stainless Steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72 mm long, pin at the back side. ISO/TS 15883-5. Designed to hold Chemdye® CDWA and Integron® IT27W indicators in order to perform routine control of cleaning and thermal disinfection processes in automatic machines. Characteristics: Chrome plating SUS304 grade stainless steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72.5 mm long, pin at the back side. Basket: 32 mm wide, 37 mm long, 0.5 mm thick. The holder is designed to mimic the cleaning challenges posed by a large process load during the washing cycle and can be fixed on the tray, which allows reproducible location of the cleaning indicator in the washer-disinfector. When CDWA4 is placed within the holder, half of the test soil is obscured, thus simulating the joint of a surgical instrument, with water stream hitting it indirectly. The other half of the test soil is covered by a mesh, thus posing a difficulty for water stream to reach it, mimicking shadowed or occluded surfaces. The new design of CDWAH optimizes the control of the washer disinfectors ability to force water and detergent into and onto the test soil. Specifications: Process: Cleaning and thermodisinfection Regulations: ISO 15883

Read more less

Instructions For Use: Before The Test: Place the holder around the neck of the capsule. Press the holder down so that the groove of the holder fits securely around the neck of the vial. Insert the L shaped end on either side of the holder into the holes of the Ultrasonic device’s basket to hold the vial in position. The holder can be attached to a wire basket or perforated basket. Vials should be placed in the correct location within a tray / basket according to Ultrasonic Cleaning Indicator´s IFU based on the size of the tank. After the test is complete After the ultrasonic cycle remove the vial holding it with three fingers of one hand and the index finger and thumb of the other hand on the holder and lid of capsule. Place the index finger on the end of the holder, then place the thumb on the lid of the capsule for support, push the holder back off the neck of the capsule and remove the holder with both fingers.

Read more less

CDWA4 / Cleaning Indicator for cleaning performance tests. Challenge level: very high. Detects all the factors that affect the result of a washing process. Initial Color: Fuchsia. Result: removal of the fuchsia organic substance. Designed for routine control of cleaning processes and for monitoring automatic washing machines effectiveness as well as monitoring ultrasonic washing machines which operate at frequencies equal to or greater than 35 kHz, and temperatures between 30 ºC and 70 ºC. Characteristics: Challenge Level: Very high. Allows detection of all factors affecting the outcome of cleaning process. Initial Color: Fuchsia. Size: 70 mm x 30 mm (approximate). Synthetic temperature-stable support. Result: Elimination of fuchsia organic substance. To interpret results visually, use the results reference guide on product´s instructions for use. Optionally, the readout of the cleaning indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Choose the Chemdye® Splat CDWA indicator according to the desired difficulty. Place the indicator on the Chemdye® Splat CDWAH or Chemdye® Splat CDWAH-U holder. Place the system on the tray along with the material. Once the cleaning cycle is over, remove the indicator. Analyze Chemdye® Splat CDWA indicators using the reference table and record results. If unfavorable results are obtained, perform the appropriate corrective actions and repeat the washing process. Specifications: Process: Cleaning and thermodisinfection Initial Color: Fuchsia Regulations: ISO 13485, ISO/TS 15883-5

Read more less

Super Rapid Self-contained Biological Indicator for Steam sterilization processes. Geobacillus stearothermophilus (ATCC 7953) 10^6 spores per vial. Readout: 1 hour. An optional visual pH color change confirmation could be made after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to a greenish color first, and then to yellow during incubation at 60 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 1 hour-reading. Fluorescence results may be compared to the 7-day visual reading. Note: if 7-day readout is performed, a humidified environment will be required to avoid medium to dry out. D-Value: Not lower than 1.5 minutes at 121 ºC. Another D-value is informed at 132 ºC and at 135 ºC. Z-Value is informed. Instructions For Use: Identify the Terragene® Bionova® BT222 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT222 SCBI from the sterilized package. WARNING: Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature. Check the Process Indicator on SCBI label. A color change to brown indicates that the SCBI has been exposed to Steam. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the Process Indicator color has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader Incubators for a maximum of 1 hour at (60 ± 2) °C for super rapid readout. Specifications: Process: Steam Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 1 h Regulations: IRAM 37102-1, IRAM 37102-3, ISO 11138-1, ISO 11138-3

Read more less

Rapid Self-contained Biological Indicator for Ethylene Oxide sterilization processes. Bacillus atrophaeus (ATCC 9372) 10^6 spores per vial. Readout: 4 hours. An optional visual pH color change confirmation could be made after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to a greenish color first, and then to yellow during incubation at 37 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain blue after the incubation process. 7-day readout for visual confirmation by color change is optional and not intended to be routinely performed; it is an initial validation of the 4 hour-reading. Fluorescence results may be compared to the 7-day visual reading. Instructions For Use: Identify the Terragene® Bionova® BT110 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT110 SCBI from the sterilized package. Check the Process Indicator on SCBI label. A color change to green indicates that the SCBI has been exposed to Ethylene Oxide. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the color of the Process Indicator has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader incubators for a maximum of 4 hours at (37 ± 2) °C for rapid readout. Note: Holding time between sterilization and incubation should not exceed a 7-day period. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means failure in the sterilization process. If no fluorescence is detected after 4 hours of incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for visual color change. If chamber relative humidity is unknown or < 35 %, continue to incubate the Biological Indicator for a pH color change result, since low relative humidity may increase the fluorescent readout time beyond 4 hours. Specifications: Process: Ethylene Oxide Microorganism: Bacillus atrophaeus (ATCC 9372) Population: 10^6 Spores/carrier Read-Out Time: 4 h Regulations: IRAM 37102-1, IRAM 37102-2, ISO 11138-1, ISO 11138-2 Length: 40 mm

Read more less

Hyper Rapid Self-contained Biological Indicator for Vaporized Hydrogen Peroxide sterilization processes. Final readout: 5 minutes. Indications For Use: Terragene® Bionova® BT98 fluorescence hyper rapid readout Biological Indicators have been designed for quick and easy monitoring of Plasma or vaporized hydrogen Peroxide sterilization cycles. Device Description: Terragene® Bionova® BT98 fluorescence hyper rapid readout Biological Indicators are single-use Self-Contained Biological Indicators (SCBIs) that consist of a polypropylene tube, a spore carrier and a glass ampoule with a culture medium, enclosed with a colored cap. Each tube contains a population of Geobacillus stearotermophilus ATCC 7953 spores inoculated on a spore carrier, a plastic cap with holes and a barrier permeable to Plasma or Vaporized Hydrogen Peroxide. Each BT98 has a Process Indicator on label that changes from purple to green when exposed to hydrogen peroxide. Precautions: Warning: Do not use Terragene® Bionova® BT98 SCBI to control EO, Dry Heat, Formaldehyde or other sterilization processes different from specified. Do not reuse SCBI. Warning:  Place one or more SCBI in sterilizing hard-to-reach areas to ensure all areas of the chamber are sterilized. Please evaluate all load configurations to ensure ALL hard-to-reach areas have been identified, and place a SCBI in each of those locations. Warning:  Do not reuse the sterilizer until the SCBI test result is negative. Instructions For Use: Identify the Terragene® Bionova® BT98 SCBI by writing the sterilizer number (incase of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. Caution Wear safety glasses and gloves when removing the Terragene® Bionova® BT98 SCBI from the sterilized package. ( Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature.) Check the Process Indicator on SCBI label. A color change to green indicates that the SCBI has been exposed to Hydrogen Peroxide. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the color of the Process Indicator has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® auto-reader incubators for a maximum of 5 minutes at (60 ± 2) °C for hyper rapid readout. (Holding time between sterilization and incubation should not exceed a 1-hour period.) Important: Use a non-sterilized SCBI as a positive control at least once per day, when a sterilization cycle is run. The positive control ensures that correct incubation conditions were met; the capability of the medium to promote rapid growth; viability of spores has not been altered due to improper storage temperature, humidity or proximity to chemicals and proper functioning of Terragene® Bionova® Auto-Reader Incubators. Both, the positive control indicator and the processed indicator, should belong to the same batch. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means failure in the sterilization process. If no fluorescence is detected after 5 minutes of incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for visual color change. Record positive results and discard the SCBIs immediately, as it is indicated below. Hyper Rapid Readout: 5 minutes The hyper rapid readout must be carried out in the appropriate Terragene® Bionova® auto-reader incubators. Fluorescence is emitted after the reader stimulates the spore carrier with UV light. Final readout of negative results is readily available after 5 minutes of incubation. Fluorescence readout is an indirect measure of the viability of Geobacillus stearothermophilus spores after the sterilization process (positive results). Furthermore, a failure in the sterilization process can also become evident by culture medium color-change. Due to the high sensitivity of the fluorescence results at 5 minutes, conventional incubation for color change of Terragene® Bionova® SCBI BT98 is not an advantage. Visual Confirmation: 5 days: Optionally, you can perform a visual color-change confirmation after a 5-day incubation. If the sterilization process has not been successful, culture medium will turn to yellow during incubation at (60 ± 2) ºC, indicating the presence of living spores. If sterilization was successful, culture medium will remain purple after incubation. The positive control must show a color change from purple to yellow for results to be valid. ( If 5-day readout is performed, a humidified environment will be required to prevent medium from drying out.) Readout Time: 7 days A 7-day readout is optional and may be routinely performed. This is an initial validation of the 5-minute readout. Fluorescence results are compared to the 7-day visual readouts. Monitoring Frequency: Follow facility policies and procedures which should specify a biological indicator monitoring frequency compliant with professional association recommended practices and/or national guidelines and standards. As the best practice and to provide optimal patient safety, Terragene® recommends that every sterilization load be monitored with an appropriate biological indicator. Storage: Store in a dark place at temperature between 10-30 ºC and 30-80 % relative humidity. Do not freeze. Do not store biological indicators near sterilizing agents or other chemical products. Shelf Life: Biological Indicators have an expiration date of 2 years from the date of manufacture when stored at recommended conditions. Do not use indicators after their expiration date. Chemical Process Indicator on SCBI label have an expiration date of 2 years when used as part of SCBI. Endpoint Stability Reaction: Chemical Process Indicator endpoint shall remain unchanged for a period of 6 months when stored at previously indicated conditions. Disposal: Discard biological indicators after use according to your country’s healthcare and safety regulations. The positive biological indicators can be autoclaved in a gravity air displacement steam sterilizer at 121 ºC for 5 minutes, 132 ºC for 15 minutes or 134 ºC for 10 minutes; or in a dynamic air removal steam sterilizer at 132 °C for 4 minutes or 135 °C for 3 minutes. Specifications: Population: 10^6 Spores/carrier Read-Out Time: 5 min Regulations: IRAM 37102-1:1999, ISO 11138-1:2017, ISO 13485:2016 / NS-EN ISO 13485:2016

Read more less

Ultra Rapid Self-contained Biological Indicator for Steam sterilization processes. Geobacillus stearothermophilus (ATCC 7953) 10^6 spores per vial. Readout: 20 minutes. An optional visual pH color change confirmation could be made after 48 hours of incubation. If the sterilization process has not been successful, the culture medium will change to a greenish color first, and then to yellow during incubation at 60 ºC, thus showing the presence of living spores. If the sterilization process is successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 20 minute-reading. Fluorescence results may be compared to the 7-day visual reading. Note: If 7-day readout is performed, a humidified environment will be required to avoid medium to dry out. D-Value: Not lower than 1.5 minutes at 121 ºC. Another D-value is informed at 132ºC and at 135ºC. Z-Value is informed. Instructions For Use: Identify the Terragene® Bionova® BT224 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT224 SCBI from the sterilized package. (Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature.) 5. Check the Process Indicator on SCBI label. A color change to brown indicates that the SCBI has been exposed to Steam. ( This color change does not evidence the process effectiveness to achieve sterility. If the Process Indicator color has not changed, check the sterilization process.) 6. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. 7. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader Incubators for a maximum of 20 minutes at (60 ± 2) °C for ultra rapid readout. Important: Use a non-sterilized SCBI as a positive control at least once per day, when a sterilization cycle is run. The positive control ensures that correct incubation conditions were met; capability of medium to promote rapid growth; viability of spores has not been altered due to improper storage temperature, humidity or proximity to chemicals and proper functioning of Terragene® Bionova® Auto-Reader Incubators. Both, the positive control indicator and the processed indicator, should belong to the same batch. Note: Holding time between sterilization and incubation should not exceed a 7-day period. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means a failure in the sterilization process. If no fluorescence is detected at 20-minute incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for a visual color change.

Read more less

Super Rapid Self-contained Biological Indicator for Plasma or Vaporized Hydrogen Peroxide Sterilization Processes. Final readout: 30 minutes. An optional visual pH color change confirmation could be performed after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to yellow during incubation at 60 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 30-minute reading. Fluorescence results may be compared to the 7-day visual reading. Note: If 7-day readout is performed, a humidified environment will be required to prevent medium from drying out. Instructions For Use: Identify the Terragene® Bionova® BT96 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT96 SCBI from the sterilized package.( Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature.) Check the Process Indicator on SCBI label. A color change to green indicates that the SCBI has been exposed to Hydrogen Peroxide. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the color of the Process Indicator has not changed, check the sterilization process. 6. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader incubators for a maximum of 30 minutes at (60 ± 2) °C for super rapid readout. Important: Use a non-sterilized SCBI as a positive control at least once per day, when a sterilization cycle is run. The positive control ensures that correct incubation conditions were met; the capability of the medium to promote rapid growth; viability of spores has not been altered due to improper storage temperature, humidity or proximity to chemicals and proper functioning of Terragene® Bionova® Auto-Reader Incubators. Both, the positive control indicator and the processed indicator, should belong to the same batch. Note: Holding time between sterilization and incubation should not exceed a 7-day period. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means failure in the sterilization process. If no fluorescence is detected after 30 minutes of incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for visual color change. Specifications: Process: Hydrogen peroxide Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 30 min Regulations: IRAM 37102-1, ISO 11138-1

Read more less

Indicator Tape for Plasma or Vaporized Hydrogen Peroxide Sterilization Processes. Cintape® CT40 Process Indicators (Type 1 according ISO 11140-1:2014 standard) are single-use chemical indicators that consist of a roll of self-adhesive plastic tape printed with indicator ink. These indicators have been designed to monitor Plasma or Vaporized Hydrogen Peroxide sterilization processes, ensuring adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. The adhesive component of the tape allows the adhesion to different types of packaging and wraps, such as cloth, paper and plastic being easy to remove and leaving no residues. Innovative highly sensitive purple ink was developed to turn to green when the indicator is exposed to Plasma or Vaporized Hydrogen Peroxide. Endpoint condition: 50 ºC, 6 minutes, 2.3 mg/l H2O2. Indicators 100 % free of toxic heavy metals. Instructions For Use: Place within a sterilizer a wrapped package closed with Cintape® CT40 Process Indicator tape that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. Perform the sterilization cycle. After the sterilization process has finished, remove the package from the sterilizer and analyze the indicator results. The indicator must turn to the reference color for considering that it was exposed to Plasma or Vaporized Hydrogen Peroxide. For reference color, please refer to Result Reference Guide. Specifications: Process: Hydrogen Peroxide Initial Color: Purple Final Color: Green Indicator Type: Type 1 chemical indicator Regulations: ISO 11140-1

Read more less