ERGOFORM Technology: MICROFLEX XCEED  gloves are designed with proprietary ergonomic design technology to support musculoskeletal health and increase worker productivity Exceptional tactile sensitivity: These lightweight, yet strong, nitrile gloves offer a thin design for enhanced tactile sensitivity Strong barrier integrity: With a low 0.65 AQL, these gloves offer advanced barrier integrity Strong formulation: MICROFLEX XCEED gloves are designed to prevent rips and tears Reduced waste: Gloves are smartly packaged, with 250 gloves per box and easy, single glove dispensing to reduce waste Recommended For General Purpose Auto Aftermarket Plant disinfection and sanitization All food processing, applications that have food contact Assembly of parts Sample taking and processing Raw material sample collection Enhanced tactile sensitivity and dexterity, especially for delicate procedures Extra comfort during long, sustained procedures Extra comfort during long, sustained procedures Protection from Type I latex allergy in HCW's or patients Standard, moderate risk examination procedures Primary Industries Automotive Aftermarket Food Processing Life Sciences Healthcare Agriculture Emergency Medical Services Utilities Warehousing Featured Technologies Key Features And Benefits ERGOFORM™ Technology: Ergonomic design supports musculoskeletal health Thin-mil design: Provides enhanced tactile sensitivity Low AQL: 0.65 AQL for allowable pinholes means exceptional barrier integrity Product Details Packaging 250 gloves per dispenser10 dispensers per case2500 gloves per case*230 gloves per dispenser (Size XL)*2300 gloves per case (Size XL) Size Code Packaging XS (5.5 - 6) XC-310-XS 250 gloves per dispenser 10 dispensers per case 2500 gloves per case *230 gloves per dispenser (Size XL) *2300 gloves per case (Size XL) S (6.5 - 7) XC-310-S M (7.5 - 8) XC-310-M L (8.5 - 9) XC-310-L XL (9.5 - 10) XC-310-XL Downloads Product Data Sheet

Read more less

Heightened tactility: MICROFLEX UltraSense exam gloves feature a thin, yet durable nitrile construction which provides reliable protection and tactility Unique color: The unique royal blue color also provides greater contrast and visibility than standard light blue nitrile gloves Adhesive resistance: These gloves are designed to resist sticking to tape and adhesives on the job Specialized protection: These gloves also offer specific protection against chemotherapy drugs* Recommended For Equipment, maintenance and repair All food processing, applications that have food contact Sample taking and processing Protection from Type I latex allergy in HCW's or patients Standard patient examinations Primary Industries Food Processing Life Sciences Healthcare Key Features And Benefits Thin nitrile formulation: For reliable protection and tactility Non-stick surface: Resists tapes and adhesives Chemotherapy drug resistance: Specialized protection Product Details Packaging 100 gloves per dispenser10 dispensers per case1000 gloves per case Size Code Packaging XS (5.5 - 6) US-220-XS 100 gloves per dispenser 10 dispensers per case 1000 gloves per case S (6.5 - 7) US-220-S M (7.5 - 8) US-220-M L (8.5 - 9) US-220-L XL (9.5 - 10) US-220-XL Downloads Product Data Sheet

Read more less

Contains glycerol and dimethicone as moisturizing agents to help retain moisture and rehydrate skin Low-friction outer-surface finish offers effortless donning and optimal comfort when double gloved Green color for easy identification of a glove breach The DERMASHIELD Technology internal coating together with the built-in moisturizer, facilitates dry and damp donning as well as intra-operative changes Key Features And Benefits: Helps keep skin moist and supple Effortless donning and optimal comfort when double gloved Easy identification of a glove breach Effortless dry and damp donning as well as intra-operative changes Recommended For: All surgeries, especially high-risk procedures in orthopedics, trauma, and cardiac Damp donning Easy identification of a glove breach Use as an under glove when double gloving Primary Industries: Healthcare Featured Technologies: Product Details: Packaging: Size Code 5.5 2018455 50 pairs per box; 4 boxes per carton/case; 200 pairs per carton/case 6 2018460 6.5 2018465 7 2018470 7.5 2018475 8 2018480 8.5 2018485 9 2018490 Downloads: Product Data Sheet Instructions for Use0.6 MB (pdf) Product Catalog24.05 MB (pdf)

Read more less

mproved durability: MICROFLEX Supreno SE SU-690 exam gloves are made with a strong nitrile formulation, offering wearers robust personal protection Strong grip: These gloves’ textured fingertips ensure better grip when handling tools and equipment Low AQL: 0.65 AQL means these gloves offer excellent barrier protection against potentially hazardous substances. Recommended For Inspection, selecting, checking parts Assembly and inspection of components Picking and fastening components Equipment repair and maintenance General Purpose Auto Aftermarket Oil, fluids and filter change Engine transmission and repair Tire rotation & changes Maintaining lab furniture and equipment Assembly of parts Sample taking and processing Raw material sample collection Higher-risk clinical applications Protection from Type I latex allergy in HCW's or patients Primary Industries Automotive Automotive Aftermarket Life Sciences Healthcare Agriculture Emergency Medical Services Utilities Warehousing Key Features And Benefits Robust nitrile formulation: For durable personal protection Advanced barrier protection: Low 0.65 AQL for allowable pinholes Textured fingertips: Allows for assured grip in diverse conditions Product Details Packaging 100 gloves per dispenser10 dispensers per case1000 gloves per case Size Code Packaging XS (5.5 - 6) SU-690-XS 100 gloves per dispenser 10 dispensers per case 1000 gloves per case S (6.5 - 7) SU-690-S M (7.5 - 8) SU-690-M L (8.5 - 9) SU-690-L XL (9.5 - 10) SU-690-XL Downloads Product Data Sheet

Read more less

Strong formulation: MICROFLEX Supreno EC SEC-375 exam gloves’ robust nitrile formulation makes them more durable and resistant to rips, snags and tears Specialized protection: Simulating real-world overdose conditions, these gloves are specially tested against gastric acid (vomit) and fentanyl, as well as cytotoxic/chemotherapy drugs* Real-world performance: These sturdy medical exam gloves also satisfy NFPA 1999 Emergency Medical Glove Requirements, making them suitable for healthcare professionals, first responders and lab workers. Low AQL: These medical exam gloves’ low 0.65 AQL reinforces their barrier integrity Extended protection: Featuring an extended cuff, these gloves offer forearm and wrist protection for medical workers. Recommended For Inspection, selecting, checking parts Assembly and inspection of components Picking and fastening components Equipment repair and maintenance General Purpose Auto Aftermarket Tire rotation & changes Animal care feeding and cleanup Maintaining lab furniture and equipment Sample taking and processing Administering drugs Raw material sample collection Tested for use with chemotherapy drugs Extra protection over the wrist and arm Higher-risk clinical applications Protection from Type I latex allergy in HCW's or patients Primary Industries Automotive Automotive Aftermarket Life Sciences Healthcare Emergency Medical Services Key Features And Benefits Durable nitrile formulation: Robust defense against snags and tears Specialized protection: NFPA 1999 certified and withstands cytotoxic drugs Low AQL: 0.65 AQL for allowable pinholes means exceptional barrier integrity Product Details Packaging 50 gloves per dispenser10 dispensers per case500 gloves per case*40 gloves per dispenser (Size XXXL)*400 gloves per case (Size XXXL) Size Code Packaging S (6.5 - 7) SEC-375-S 50 gloves per dispenser; 10 dispensers per case; 500 gloves per case; *40 gloves per dispenser (Size XXXL) *400 gloves per case (Size XXXL)  M (7.5 - 8) SEC-375-M L (8.5 - 9) SEC-375-L XL (9.5 - 10) SEC-375-XL XXL (10.5 - 11) SEC-375-XXL XXXL (11.5 - 12) SEC-375-XXXL Downloads Product Data Sheet

Read more less

Elevated comfort: Soft neoprene exam gloves featuring ERGOFORM Ergonomic Design Technology for extra comfort and support of musculoskeletal health Enhanced grip: Certified by US Ergonomics for enhanced wet grip capabilities* Heightened tactile sensitivity: Their thin, ultra-lightweight design offers enhanced tactile sensitivity, for more precise handling of tools and instruments Reduced waste: Packed 200 per box to reduce packaging waste Recommended For Enhanced grip in wet environments Environmentally friendly facilities Extra comfort during long, sustained procedures General dentistry Protection from Type I latex allergy in HCW's or patients Standard patient examinations Primary Industries Healthcare Dental Veterinary Featured Technologies Key Features And Benefits ERGOFORM Technology: Ergonomic design supports musculoskeletal health US Ergonomics certification for wet grip: Provides enhanced grip performance Thin ultra-lightweight design: For heightened tactile sensitivity Product Details Packaging Case/Carton=2000 gloves/10 Dispensers; Dispenser=200 gloves (XS-L) Case/Carton=1800 gloves/10 Dispensers; Dispenser=180 gloves (XL) Size Code Packaging XS (5.5 - 6) 73737060 Case/Carton=2000 gloves/10 Dispensers; Dispenser=200 gloves (XS-L) Case/Carton=1800 gloves/10 Dispensers; Dispenser=180 gloves (XL) S (6.5 - 7) 73737070 M (7.5 - 8) 73737080 L (8.5 - 9) 73737090 XL (9.5 - 10) 73737100 Downloads Product Data Sheet

Read more less

Three-layer design: Three layers ensure superior protection against harsh chemicals Thin mil design: Designed to be thinner than standard reusable chemical-resistant gloves (7.8 mil) for protection that allows for better tactility when handling small objects and tools Elevated comfort: Soft material and ergonomic design offer outstanding fit, feel and flexibility Assured quality: Their low AQL (0.65) means minimal pinhole defect risks High standards: Meets EN 374 Type A certified in Europe and KOSHA certified in Korea Recommended For Inspection, selecting, checking parts Assembly and inspection of components Equipment repair and maintenance Production line support and maintenance General Purpose Auto Aftermarket Oil, fluids and filter change Blending, compounding solids and liquids Sample taking and processing Transferring liquids and solids between vessels and tanks and process equipment Primary Industries Aerospace Automotive Automotive Aftermarket Life Sciences Chemical Agriculture Machinery and Equipment Metal fabrication Utilities Warehousing Key Features And Benefits Three-layer design: Offering resistance to harsh chemicals Thinnest chemical-resistant disposable glove: For tactility and dexterity Low AQL: 0.65 AQL for allowable pinholes means exceptional barrier integrity Product Details Packaging 50 gloves per dispenser10 dispensers per case500 gloves per case  Size Code Packaging XS (5.5 - 6) 93260060 Bulk Pack: 50 gloves per dispenser; 10 dispensers/500 gloves per case S (6.5 - 7) 93260070 M (7.5 - 8) 93260080 L (8.5 - 9) 93260090 XL (9.5 - 10) 93260100 XXL (10.5 - 11) 93260110 Downloads Product Data Sheet Declaration Of Conformity UK Declaration Of Conformity

Read more less

ICTP Mini / Thermal Paper specially designed for using with Bionova® Mini Bio, Bionova® Mini Pro Auto-Reader€™s Printer.Thermal Paper specially designed for using with Bionova® Mini Bio, Bionova® Mini Pro Auto-Reader€™s Printer. Specifications: Thermal Paper Roll. Color: White Paper Length: 4.7 m. Paper Width: 57 mm. Roll External Diameter: 23 mm. Roll Internal Diameter: 13.4 mm. Its function is to record the final results of biological indicators subjected to sterilization process and quantitative analysis of hygiene monitoring systems at each activated position of Bionova® Mini Bio and Mini Pro incubators, which allows record keeping in your sterilization records book. Read Bionova® Mini Bio and Mini Pro directions for use, as appropriate.

Read more less

ICTP / Incubator Thermal Paper. Accessory for the IC10/20FR and IC10/20FRLCD incubator€™s thermal printer. Thermal Paper specially designed for using with Bionova® IC10/20FR, and Bionova® IC10/20FRLCD Auto-Reader€™s Printer. Specifications: Thermal Paper Roll. Color: white Paper length: 30 m. Paper width: 57 mm. Roll external diameter: 50 mm. Roll internal diameter: 13.4 mm. Its function is to record the final results of biological indicators subjected to sterilization process and quantitative analysis of hygiene monitoring systems at each activated position of IC10/20FR or IC10/20FRLCD, which allows registration into your sterilization record keeping book. Read IC10/20FR or IC10/20FRLCD directions for use, as appropriate.

Read more less

Multi-variable Chemical Indicator printed with reactive ink for Steam sterilization processes. Chemdye® CD29 Multivariable Process Indicators (Type 4 according to ISO 11140-1:2014 standard) are single-use chemical indicators that consist of one-side laminated punched paper double strips printed with indicator ink. These indicators have been designed to monitor Steam sterilization processes within loads, ensuring an adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. Innovative highly sensitive yellow ink was developed to turn to dark brown/black when the indicator is exposed to Steam considering the critical process variables which provides additional quality assurance. Endpoint condition: 121 °C, 15 minutes; 134 °C, 3.5 minutes. Indicators 100 % free of toxic heavy metals. Instructions For Use: Place a Chemdye® CD29 Multivariable Process Indicator within each package, bag or tray that will be sterilized by Steam. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Steam, the ink must turn to the dark brown/black reference color when the sterilization parameters are reached. For reference color, please refer to Result Reference Guide. Specifications: Process: Steam Initial Color: Yellow Final Color; Black Indicator Type: Type 4 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

CD16 / Multi-variable Chemical Indicators, double card strips printed with reactive ink for Ethylene Oxide sterilization processes. Metals Free. Control of Ethylene Oxide (EO) sterilization processes. Conditions: 600 mg/l EO, RH 60%, 30 °C, 30 minutes // 600 mg/l EO, RH 60%, 54 °C, 20 minutes. Characteristics: Type 4 Chemical Indicator (according to ISO 11140-1). Double punched card strips printed with indicator ink. Specifications: Size: 200 x 15 mm. Initial Color: Purple/Brown. Final Color: Green. 100 % Toxic Heavy Metals free. Instructions For Use: Place a Chemdy® CD16 Multivariable Process Indicator within each package, bag or tray that will be sterilized by Ethylene Oxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure mthat the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Ethylene Oxide, the ink must turn to the green reference color when the sterilization parameters are reached. More Info About This Product: Color Chart

Read more less

KPCD224-C / Test Pack PCD Kit. Process Challenge Device for Steam sterilization processes with moving-front Type 5 Integrator and Bionova® Ultra Rapid Self-contained Biological Indicator BT224, plus Bionova® BT224 Biological Indicators Positive Control. Class 5 spores per strip. For routine load release, especially for loads containing implants. For routine sterilizer monitoring. For periodic validation of the sterilizer (after installation, repair, relocation). Detects inadequate air removal and steam penetration in dynamic- airremoval (pre-vacuum) and gravity displacement, steam autoclaves between 132-135 ºC. Characteristics: The kit Consists Of: PCD224-C: Porous Cards System Holding: A Self-contained Biological Indicator Bionova® BT224.A Type 5 chemical indicator Integron® IT26-C (moving-front integrator). A self-adhesive Record Card, PCDBI-C-RC, where data on sterilization cycle may be written. Self-contained Biological Indicator Bionova® BT224 (to be used as a positive control) Specifications: Initial Color: Blue. Final Color: Dark Grey or Black. Process: Steam Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 20 min Regulations: ANSI/AAMI ST79, ISO 11138-3, ISO 11140-1 IT26-C Integrator Indicator (within the challenge device): The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. Integration condition is calibrated against the kill time of a 106 G. stearothermophilus ATCC 7953 spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 ºC, 128 ºC, 135 ºC. BT224 Self-contained Ultra Rapid Biological Indicator (within the challenge device): 106 G. stearothermophilus ATCC 7953 spores per vial in paper carrier. Glass ampoule with growth indicator medium. Label with chemical indicator line printed with Steam reactive ink (Color change: pink to brown) Final results: by fluorescence after incubation for 20 minutes at 60 ºC (sensitivity 97%). An optional visual pH color change confirmation could be made after 48 hours of incubation. A 7-day readout is optional to confirm 20-minutes results by color change. Note: If sterilization process was not successful, indicator medium will turn yellow after incubation, thus indicating the presence of living G. stearothermophilus spores. If sterilization process was successful, indicator medium will remain purple after incubation.

Read more less

KPCD222-C / Test Pack PCD Kit. Process Challenge Device for Steam sterilization processes with moving-front Type 5 Indicator and Bionova® Super Rapid Self-contained Biological Indicator BT222, plus Bionova® BT222 Biological Indicators Positive Control. For routine load release, especially for loads containing implants. For routine sterilizer monitoring. For periodic validation of the sterilizer (after installation, repair, relocation). Detects inadequate air removal and steam penetration in dynamic-airremoval (pre-vacuum) and gravity displacement steam autoclaves between 121-135 ºC. Characteristics: The Kit Consists Of: PCD222-C: Porous cards system holding: A Self-contained Biological Indicator Bionova® BT222. A Type 5 chemical indicator Integron® IT26-C (moving-front integrator). A self-adhesive Record Card, PCDBI-C-RC, where data on sterilization cycle may be written. Self-contained Biological Indicator Bionova® BT222 (to be used as a positive control) Specifications: Initial Color: Blue Final Color: Dark Grey or Black Process: Steam Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 1 h Regulations: ANSI/AAMI ST79, ISO 11138-1, ISO 11138-3 IT26-C Chemical Integrator (within the challenge device) The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. Integration condition is calibrated against the kill time of a 106 G. stearothermophilus ATCC 7953 spores€™ population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. BT222 Super Rapid Self-contained Biological Indicator (within the challenge device): ‰¥106 G. stearothermophilus ATCC 7953 spores per vial in paper carrier. Glass ampoule with growth indicator medium. Label with chemical indicator line printed with Steam reactive ink (Color change: pink to brown)

Read more less

CT22 / Indicator Tape for Steam sterilization processes. Cintape® CT22 Process Indicators (Type 1 according ISO 11140-1:2014 standard) are single-use chemical indicators that consist of a roll of self-adhesive paper tape printed with indicator ink. These indicators have been designed to monitor Steam sterilization processes, ensuring an adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. The adhesive component of the tape allows the adhesion to different types of packaging and wraps, such as cloth, paper and plastic being easy to remove and leaving no residues. Innovative highly sensitive yellow ink was developed to turn to dark brown / black when the indicator is exposed to Steam. Endpoint condition: 121 ºC, 10 minutes; 134 ºC, 2 minutes. Instructions For Use: Place within a sterilizer a wrapped package closed with Cintape® CT22 Process Indicator tape that will be sterilized by Steam. Perform the sterilization cycle. After the sterilization process has finished, remove the package from the sterilizer and analyze the indicator results. The indicator must turn to the reference color for considering that it was exposed to Steam. For reference color, please refer to Result Reference Guide. Specifications: Process: Steam Initial Color: Yellow Final Color: Black, Dark Brown Indicator Type: Type 1 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

Indicator Tape for Plasma or Vaporized Hydrogen Peroxide Sterilization Processes. Cintape® CT40 Process Indicators (Type 1 according ISO 11140-1:2014 standard) are single-use chemical indicators that consist of a roll of self-adhesive plastic tape printed with indicator ink. These indicators have been designed to monitor Plasma or Vaporized Hydrogen Peroxide sterilization processes, ensuring adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. The adhesive component of the tape allows the adhesion to different types of packaging and wraps, such as cloth, paper and plastic being easy to remove and leaving no residues. Innovative highly sensitive purple ink was developed to turn to green when the indicator is exposed to Plasma or Vaporized Hydrogen Peroxide. Endpoint condition: 50 ºC, 6 minutes, 2.3 mg/l H2O2. Indicators 100 % free of toxic heavy metals. Instructions For Use: Place within a sterilizer a wrapped package closed with Cintape® CT40 Process Indicator tape that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. Perform the sterilization cycle. After the sterilization process has finished, remove the package from the sterilizer and analyze the indicator results. The indicator must turn to the reference color for considering that it was exposed to Plasma or Vaporized Hydrogen Peroxide. For reference color, please refer to Result Reference Guide. Specifications: Process: Hydrogen Peroxide Initial Color: Purple Final Color: Green Indicator Type: Type 1 chemical indicator Regulations: ISO 11140-1

Read more less

Super Rapid Self-contained Biological Indicator for Plasma or Vaporized Hydrogen Peroxide Sterilization Processes. Final readout: 30 minutes. An optional visual pH color change confirmation could be performed after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to yellow during incubation at 60 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 30-minute reading. Fluorescence results may be compared to the 7-day visual reading. Note: If 7-day readout is performed, a humidified environment will be required to prevent medium from drying out. Instructions For Use: Identify the Terragene® Bionova® BT96 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT96 SCBI from the sterilized package.( Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature.) Check the Process Indicator on SCBI label. A color change to green indicates that the SCBI has been exposed to Hydrogen Peroxide. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the color of the Process Indicator has not changed, check the sterilization process. 6. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader incubators for a maximum of 30 minutes at (60 ± 2) °C for super rapid readout. Important: Use a non-sterilized SCBI as a positive control at least once per day, when a sterilization cycle is run. The positive control ensures that correct incubation conditions were met; the capability of the medium to promote rapid growth; viability of spores has not been altered due to improper storage temperature, humidity or proximity to chemicals and proper functioning of Terragene® Bionova® Auto-Reader Incubators. Both, the positive control indicator and the processed indicator, should belong to the same batch. Note: Holding time between sterilization and incubation should not exceed a 7-day period. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means failure in the sterilization process. If no fluorescence is detected after 30 minutes of incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for visual color change. Specifications: Process: Hydrogen peroxide Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 30 min Regulations: IRAM 37102-1, ISO 11138-1

Read more less

Ultra Rapid Self-contained Biological Indicator for Steam sterilization processes. Geobacillus stearothermophilus (ATCC 7953) 10^6 spores per vial. Readout: 20 minutes. An optional visual pH color change confirmation could be made after 48 hours of incubation. If the sterilization process has not been successful, the culture medium will change to a greenish color first, and then to yellow during incubation at 60 ºC, thus showing the presence of living spores. If the sterilization process is successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 20 minute-reading. Fluorescence results may be compared to the 7-day visual reading. Note: If 7-day readout is performed, a humidified environment will be required to avoid medium to dry out. D-Value: Not lower than 1.5 minutes at 121 ºC. Another D-value is informed at 132ºC and at 135ºC. Z-Value is informed. Instructions For Use: Identify the Terragene® Bionova® BT224 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT224 SCBI from the sterilized package. (Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature.) 5. Check the Process Indicator on SCBI label. A color change to brown indicates that the SCBI has been exposed to Steam. ( This color change does not evidence the process effectiveness to achieve sterility. If the Process Indicator color has not changed, check the sterilization process.) 6. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. 7. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader Incubators for a maximum of 20 minutes at (60 ± 2) °C for ultra rapid readout. Important: Use a non-sterilized SCBI as a positive control at least once per day, when a sterilization cycle is run. The positive control ensures that correct incubation conditions were met; capability of medium to promote rapid growth; viability of spores has not been altered due to improper storage temperature, humidity or proximity to chemicals and proper functioning of Terragene® Bionova® Auto-Reader Incubators. Both, the positive control indicator and the processed indicator, should belong to the same batch. Note: Holding time between sterilization and incubation should not exceed a 7-day period. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means a failure in the sterilization process. If no fluorescence is detected at 20-minute incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for a visual color change.

Read more less

Hyper Rapid Self-contained Biological Indicator for Vaporized Hydrogen Peroxide sterilization processes. Final readout: 5 minutes. Indications For Use: Terragene® Bionova® BT98 fluorescence hyper rapid readout Biological Indicators have been designed for quick and easy monitoring of Plasma or vaporized hydrogen Peroxide sterilization cycles. Device Description: Terragene® Bionova® BT98 fluorescence hyper rapid readout Biological Indicators are single-use Self-Contained Biological Indicators (SCBIs) that consist of a polypropylene tube, a spore carrier and a glass ampoule with a culture medium, enclosed with a colored cap. Each tube contains a population of Geobacillus stearotermophilus ATCC 7953 spores inoculated on a spore carrier, a plastic cap with holes and a barrier permeable to Plasma or Vaporized Hydrogen Peroxide. Each BT98 has a Process Indicator on label that changes from purple to green when exposed to hydrogen peroxide. Precautions: Warning: Do not use Terragene® Bionova® BT98 SCBI to control EO, Dry Heat, Formaldehyde or other sterilization processes different from specified. Do not reuse SCBI. Warning:  Place one or more SCBI in sterilizing hard-to-reach areas to ensure all areas of the chamber are sterilized. Please evaluate all load configurations to ensure ALL hard-to-reach areas have been identified, and place a SCBI in each of those locations. Warning:  Do not reuse the sterilizer until the SCBI test result is negative. Instructions For Use: Identify the Terragene® Bionova® BT98 SCBI by writing the sterilizer number (incase of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. Caution Wear safety glasses and gloves when removing the Terragene® Bionova® BT98 SCBI from the sterilized package. ( Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature.) Check the Process Indicator on SCBI label. A color change to green indicates that the SCBI has been exposed to Hydrogen Peroxide. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the color of the Process Indicator has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® auto-reader incubators for a maximum of 5 minutes at (60 ± 2) °C for hyper rapid readout. (Holding time between sterilization and incubation should not exceed a 1-hour period.) Important: Use a non-sterilized SCBI as a positive control at least once per day, when a sterilization cycle is run. The positive control ensures that correct incubation conditions were met; the capability of the medium to promote rapid growth; viability of spores has not been altered due to improper storage temperature, humidity or proximity to chemicals and proper functioning of Terragene® Bionova® Auto-Reader Incubators. Both, the positive control indicator and the processed indicator, should belong to the same batch. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means failure in the sterilization process. If no fluorescence is detected after 5 minutes of incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for visual color change. Record positive results and discard the SCBIs immediately, as it is indicated below. Hyper Rapid Readout: 5 minutes The hyper rapid readout must be carried out in the appropriate Terragene® Bionova® auto-reader incubators. Fluorescence is emitted after the reader stimulates the spore carrier with UV light. Final readout of negative results is readily available after 5 minutes of incubation. Fluorescence readout is an indirect measure of the viability of Geobacillus stearothermophilus spores after the sterilization process (positive results). Furthermore, a failure in the sterilization process can also become evident by culture medium color-change. Due to the high sensitivity of the fluorescence results at 5 minutes, conventional incubation for color change of Terragene® Bionova® SCBI BT98 is not an advantage. Visual Confirmation: 5 days: Optionally, you can perform a visual color-change confirmation after a 5-day incubation. If the sterilization process has not been successful, culture medium will turn to yellow during incubation at (60 ± 2) ºC, indicating the presence of living spores. If sterilization was successful, culture medium will remain purple after incubation. The positive control must show a color change from purple to yellow for results to be valid. ( If 5-day readout is performed, a humidified environment will be required to prevent medium from drying out.) Readout Time: 7 days A 7-day readout is optional and may be routinely performed. This is an initial validation of the 5-minute readout. Fluorescence results are compared to the 7-day visual readouts. Monitoring Frequency: Follow facility policies and procedures which should specify a biological indicator monitoring frequency compliant with professional association recommended practices and/or national guidelines and standards. As the best practice and to provide optimal patient safety, Terragene® recommends that every sterilization load be monitored with an appropriate biological indicator. Storage: Store in a dark place at temperature between 10-30 ºC and 30-80 % relative humidity. Do not freeze. Do not store biological indicators near sterilizing agents or other chemical products. Shelf Life: Biological Indicators have an expiration date of 2 years from the date of manufacture when stored at recommended conditions. Do not use indicators after their expiration date. Chemical Process Indicator on SCBI label have an expiration date of 2 years when used as part of SCBI. Endpoint Stability Reaction: Chemical Process Indicator endpoint shall remain unchanged for a period of 6 months when stored at previously indicated conditions. Disposal: Discard biological indicators after use according to your country’s healthcare and safety regulations. The positive biological indicators can be autoclaved in a gravity air displacement steam sterilizer at 121 ºC for 5 minutes, 132 ºC for 15 minutes or 134 ºC for 10 minutes; or in a dynamic air removal steam sterilizer at 132 °C for 4 minutes or 135 °C for 3 minutes. Specifications: Population: 10^6 Spores/carrier Read-Out Time: 5 min Regulations: IRAM 37102-1:1999, ISO 11138-1:2017, ISO 13485:2016 / NS-EN ISO 13485:2016

Read more less

Rapid Self-contained Biological Indicator for Ethylene Oxide sterilization processes. Bacillus atrophaeus (ATCC 9372) 10^6 spores per vial. Readout: 4 hours. An optional visual pH color change confirmation could be made after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to a greenish color first, and then to yellow during incubation at 37 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain blue after the incubation process. 7-day readout for visual confirmation by color change is optional and not intended to be routinely performed; it is an initial validation of the 4 hour-reading. Fluorescence results may be compared to the 7-day visual reading. Instructions For Use: Identify the Terragene® Bionova® BT110 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT110 SCBI from the sterilized package. Check the Process Indicator on SCBI label. A color change to green indicates that the SCBI has been exposed to Ethylene Oxide. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the color of the Process Indicator has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader incubators for a maximum of 4 hours at (37 ± 2) °C for rapid readout. Note: Holding time between sterilization and incubation should not exceed a 7-day period. Fluorescence detection by the reader (excitation 340-380 nm / emission 455-465 nm) means failure in the sterilization process. If no fluorescence is detected after 4 hours of incubation, the result is negative. The positive control must give positive fluorescence readout. It is good practice to incubate a positive control for visual color change. If chamber relative humidity is unknown or < 35 %, continue to incubate the Biological Indicator for a pH color change result, since low relative humidity may increase the fluorescent readout time beyond 4 hours. Specifications: Process: Ethylene Oxide Microorganism: Bacillus atrophaeus (ATCC 9372) Population: 10^6 Spores/carrier Read-Out Time: 4 h Regulations: IRAM 37102-1, IRAM 37102-2, ISO 11138-1, ISO 11138-2 Length: 40 mm

Read more less

Super Rapid Self-contained Biological Indicator for Steam sterilization processes. Geobacillus stearothermophilus (ATCC 7953) 10^6 spores per vial. Readout: 1 hour. An optional visual pH color change confirmation could be made after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to a greenish color first, and then to yellow during incubation at 60 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 1 hour-reading. Fluorescence results may be compared to the 7-day visual reading. Note: if 7-day readout is performed, a humidified environment will be required to avoid medium to dry out. D-Value: Not lower than 1.5 minutes at 121 ºC. Another D-value is informed at 132 ºC and at 135 ºC. Z-Value is informed. Instructions For Use: Identify the Terragene® Bionova® BT222 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT222 SCBI from the sterilized package. WARNING: Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature. Check the Process Indicator on SCBI label. A color change to brown indicates that the SCBI has been exposed to Steam. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the Process Indicator color has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader Incubators for a maximum of 1 hour at (60 ± 2) °C for super rapid readout. Specifications: Process: Steam Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 1 h Regulations: IRAM 37102-1, IRAM 37102-3, ISO 11138-1, ISO 11138-3

Read more less

CDWA4 / Cleaning Indicator for cleaning performance tests. Challenge level: very high. Detects all the factors that affect the result of a washing process. Initial Color: Fuchsia. Result: removal of the fuchsia organic substance. Designed for routine control of cleaning processes and for monitoring automatic washing machines effectiveness as well as monitoring ultrasonic washing machines which operate at frequencies equal to or greater than 35 kHz, and temperatures between 30 ºC and 70 ºC. Characteristics: Challenge Level: Very high. Allows detection of all factors affecting the outcome of cleaning process. Initial Color: Fuchsia. Size: 70 mm x 30 mm (approximate). Synthetic temperature-stable support. Result: Elimination of fuchsia organic substance. To interpret results visually, use the results reference guide on product´s instructions for use. Optionally, the readout of the cleaning indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Choose the Chemdye® Splat CDWA indicator according to the desired difficulty. Place the indicator on the Chemdye® Splat CDWAH or Chemdye® Splat CDWAH-U holder. Place the system on the tray along with the material. Once the cleaning cycle is over, remove the indicator. Analyze Chemdye® Splat CDWA indicators using the reference table and record results. If unfavorable results are obtained, perform the appropriate corrective actions and repeat the washing process. Specifications: Process: Cleaning and thermodisinfection Initial Color: Fuchsia Regulations: ISO 13485, ISO/TS 15883-5

Read more less

Instructions For Use: Before The Test: Place the holder around the neck of the capsule. Press the holder down so that the groove of the holder fits securely around the neck of the vial. Insert the L shaped end on either side of the holder into the holes of the Ultrasonic device’s basket to hold the vial in position. The holder can be attached to a wire basket or perforated basket. Vials should be placed in the correct location within a tray / basket according to Ultrasonic Cleaning Indicator´s IFU based on the size of the tank. After the test is complete After the ultrasonic cycle remove the vial holding it with three fingers of one hand and the index finger and thumb of the other hand on the holder and lid of capsule. Place the index finger on the end of the holder, then place the thumb on the lid of the capsule for support, push the holder back off the neck of the capsule and remove the holder with both fingers.

Read more less

Holder for cleaning and thermodisinfection Indicators. Stainless Steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72 mm long, pin at the back side. ISO/TS 15883-5. Designed to hold Chemdye® CDWA and Integron® IT27W indicators in order to perform routine control of cleaning and thermal disinfection processes in automatic machines. Characteristics: Chrome plating SUS304 grade stainless steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72.5 mm long, pin at the back side. Basket: 32 mm wide, 37 mm long, 0.5 mm thick. The holder is designed to mimic the cleaning challenges posed by a large process load during the washing cycle and can be fixed on the tray, which allows reproducible location of the cleaning indicator in the washer-disinfector. When CDWA4 is placed within the holder, half of the test soil is obscured, thus simulating the joint of a surgical instrument, with water stream hitting it indirectly. The other half of the test soil is covered by a mesh, thus posing a difficulty for water stream to reach it, mimicking shadowed or occluded surfaces. The new design of CDWAH optimizes the control of the washer disinfectors ability to force water and detergent into and onto the test soil. Specifications: Process: Cleaning and thermodisinfection Regulations: ISO 15883

Read more less

CDWAH-U / Stainless steel re-usable holder of great resistance and durability. The holder is designed to be fixed on the tray, which allows reproducible location of the cleaning indicator in ultrasonic washing machines. Base: 32,7 mm wide, 72,5 mm long. Designed to hold Chemdye® CDWA cleaning indicators and perform routine control of cleaning processes in ultrasonic washers. Characteristics: Chrome plating SUS304 grade stainless steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72.5 mm long, pin at the back side. The holder is designed to be fixed on the tray, which allows reproducible location of the cleaning indicator in ultrasonic washing machines, without representing a challenge to the washing process. Specifications: Process: Cleaning and thermodisinfection Regulations: ISO/TS 15883-5

Read more less

IT26-1YS / Unique point chemical integrator for Steam sterilization processes between 121° C and 134° C. Control of Steam sterilization processes between 121 ºC and 135 ºC. Characteristics: Type 5 Integrator Indicator (according to ISO 11140-1). One-side-laminated strips printed with indicator ink. Size: 70 mm x 23 mm. Initial Color: Yellow. Final Color: Black. 100 % Toxic Heavy Metal free. Instructions For Use: Place a chemical integrator Integron® IT26-1YS within each package, bag or tray that will be sterilized by Steam. In rigid containers place an IT26-1YS in every corner, or at least two diagonally opposite corners, to ensure that steam has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Steam, the ink must turn to the black reference color when the integration conditions are reached. Specifications: Process: Steam Initial Color: Yellow Final Color: Black Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

2 level chemical integrator for Ethylene Oxide sterilization processes. One-side laminated strips. Metals free. Integron® IT12 Chemical Integrators (Type 5 according to ISO 11140-1:2014 standard) are single-use two level chemical indicators that consist of paper strips laminated on the back side and printed with indicator ink. They have been designed for monitoring Ethylene Oxide (EO) sterilization processes. The integration level contains a purple/brown ink which was developed to turn to green when a theoretical spore population reaches its kill time, thus indicating that the SAFE condition has been met. Level 1 – Red: Exposure level. Indicator ink turns yellow to indicate exposition to the process, but does not ensure that the variables required to achieve the integration condition have been achieved (UNSAFE condition). Level 2 – Purple / brown: Integration level. Indicator ink turns green to indicate that the integration condition indicated in the quality certificate has been achieved. This condition consists of the kill time of a theoretical 106 Bacillus atrophaeus spore population, calculated in a BIER (Biological Indicator Evaluator Resistometer), and is called SAFE condition. Indicators 100% free of toxic heavy metals. Instructions For Use: Place a Integron® IT12 Chemical Integrator along with the material to be sterilized in a suitable package according to the recommended sterilization techniques. Place the indicators in those areas of most difficult access to the sterilizing agent. Perform the sterilization cycle. After the sterilization process has finished and evacuation/ventilation process is over, you may:               A. Remove the integrator indicator taking the necessary precaution to avoid                          contact with the remaining sterilizing agent.              B. Ventilate the load together with the integrator indicator and then perform                        the reading. Analyze the results. If the SAFE integration condition has been reached, the        sterilization process has been effective. Specifications: Process: Ethylene Oxide Initial Color: Level 1 Red, Level 2 purple-brown Final Color: Level 1 Yellow, level 2 Green Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

IT26-C Extender/ Moving front Chemical Integrator to monitor Steam sterilization processes between 118°C and 138°C. Control of Steam sterilization processes between 118 °C and 138 °C. Characteristics: Type 5 Integrating Indicator (according to ISO 11140-1). Size: 52 mm x 21 mm. Chemical Integrator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of 106 Geobacillus stearothermophilus spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. Optionally, the readout of the chemical indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Carefully open the package and remove only the number of indicators needed. Reseal the package tightly. Place a Integron® IT26-C indicator in each pack, peel pouch, container system or tray to be steam sterilized in the most inaccessible area to sterilizing agent. Perform de sterilization cycle. 4After the sterilization process has finished, the dark bar should have reached the ACCEPT zone. If the dark bar has not reached the ACCEPT zone, a REJECT result is indicated and the items in the pack, peel pouch, container system, or tray were not exposed to proper steam sterilization conditions. These items should be reprocessed according to established procedures and a new IT26-C has to be used. NOTE: In some extended or wet steam cycles, the dark bar can display discoloration in some zones of the reading window, imposing a difficulty for result´s interpretation (see Result Reference Guide for reference). Despite this, regarding cycle integration parameters, this process can be considered as accepted. In case the IT26-C indicator shows a damp appearance after the sterilization process, Terragene® recommend planning an equipment´s maintenance.

Read more less

IT26-C / Moving front Chemical Integrator to monitor Steam sterilization processes between 118°C and 138°C. Control of Steam sterilization processes between 118 °C and 138 °C. Characteristics: Type 5 Integrating Indicator (according to ISO 11140-1). Size: 52 mm x 21 mm. Chemical Integrator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of 106 Geobacillus stearothermophilus spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. Optionally, the readout of the chemical indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Carefully open the package and remove only the number of indicators needed. Reseal the package tightly. Place a Integron® IT26-C indicator in each pack, peel pouch, container system or tray to be steam sterilized in the most inaccessible area to sterilizing agent. Perform de sterilization cycle. After the sterilization process has finished, the dark bar should have reached the ACCEPT zone. If the dark bar has not reached the ACCEPT zone, a REJECT result is indicated and the items in the pack, peel pouch, container system, or tray were not exposed to proper steam sterilization conditions. These items should be reprocessed according to established procedures and a new IT26-C has to be used. Despite this, regarding cycle integration parameters, this process can be considered as accepted. In case the IT26-C indicator shows a damp appearance after the sterilization process, Terragene® recommend planning an equipment´s maintenance. Specifications: Process: Steam Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: User Manual

Read more less

CD40 / Multi-variable Chemical Indicator, strips printed with reactive ink for Plasma or Vaporized Hydrogen Peroxide sterilization processes. Control of plasma or vaporized H2O2 sterilization processes. Conditions: 6 minutes, 50 °C, 2,3 mg/l H2O2. Characteristics: Type 4 Chemical Indicator (according to ISO 11140-1). Strips printed with indicator ink. Size: 105 x 18 mm (approximate). Initial color: Purple. Final color: Green. 100 % Toxic Heavy Metals free. Instructions For Use: Place a Chemdye® CD40 Multivariable Process Indicator within each package, bag or tray that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Plasma or Vaporized Hydrogen Peroxide, the ink must turn to the green or lighter reference color when the sterilization parameters are reached. Specifications: Process: Hydrogen peroxide Initial Color: Purple Final Color: Green Indicator Type: Type 4 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

Chemical Indicator, strips printed with reactive ink for Plasma or Vaporized Hydrogen Peroxide sterilization processes.Internal Control. Metals Free. Chemdye® CD42 Process Indicators (Type 1 according to ISO 11140-1:2014 standard) are single-use chemical indicators that consist of plastic strips printed with indicator ink. These indicators have been designed to monitor Plasma or Vaporized Hydrogen Peroxide sterilization processes within loads, ensuring an adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. Innovative highly sensitive red ink was developed to turn to yellow when the indicator is exposed to Plasma or Vaporized Hydrogen Peroxide. Endpoint condition: 50 ºC, 6 minutes, 2.3 mg/l H2O2. Indicators 100% free of toxic heavy metals. Instructions For Use: Place a Chemdye® CD42 Process Indicator within each package, bag or tray that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Plasma or Vaporized Hydrogen Peroxide, the ink must turn to the yellow reference color when the sterilization parameters are reached. For reference color, please refer to Result Reference Guide. More Info About This Product: Color Chart

Read more less

BD125X/1 / Bowie & Dick Test Pack Chemical Indicator with warning sheet designed for testing air removal efficiency of vacuum-assisted steam sterilizers. 100 % Lead Free. Bowie-Dick Test Pack is designed for testing air removal efficiency of dynamic-air-removal steam sterilizers operating at 132 °C for 4 minutes and at 134 °C for 3.5 minutes. Characteristics: Type 2 Chemical Indicator Equivalent in performance to the ANSI/AAMI ST79 Bowie-Dick Towel Pack. Detects residual air in the sterilizer chamber due to air leaks, air removal failures or steam quality. Holds an early warning sheet designed for early detection of air removal failures before they appear on the test sheet. Initial Color: yellow Final Color: dark brown/black (should change homogeneously in the whole sheet) Size: 16 mm x 125 mm x 113 mm Assembly: 1 impermeable barrier – 1 Foam – permeable barriers – 1 Glassine paper – 1 Test Sheet – permeable barriers – 1 Glassine paper – 1 Warning Sheet – permeable barriers – 1 impermeable barrier. Wrapped with crepe paper. Instructions For Use: 1. Run a warm-up cycle to properly heat the sterilizer. 2. Place the Bowie-Dick Test Pack horizontally with the label facing up in an empty vacuum-assisted sterilizer chamber, in the bottom/front of the sterilizer rack and over the drain. The Test Pack should read “THIS SIDE UP” when placed correctly. 3. Run the sterilizer cycle for 3.5 min. – 134 ºC / 4 min. – 132 °C. 4. Remove the test pack from sterilizer and allow it to cool down. Check color change of type 1 indicator on the label. 5. Unwrapped the pack and remove the test and warning sheets. Check them for color change and record the results. Specifications: Process: Steam Initial Color: Yellow Final Color: Black, Dark Brown Indicator Type: Type 2 chemical indicator Regulations: ISO 11140-1, ISO 11140-5  More Info About This Product: Color chart

Read more less

MINIBIO / Auto-reader Incubator for Biological Indicators with 3 positions and built-in printer. For incubation and readout of: Bionova® Rapid Fluorescence Readout Biological Indicators: BT220 (Steam): 3 hs. at 60 ºC, BT221 (Steam): 1 h. at 60 ºC, BT110 (EO): 4 hs. at 37 ºC, BT102 (Formaldehyde): 2 hs. at 60ºC, BT95 (VH2O2): 2 hs. at 60ºC. Bionova® Super Rapid Fluorescence Readout Biological Indicators: BT222 (Steam): 1 h. at 60 ºC, BT223 (Steam): 30 min. at 60 ºC, BT96 (VH2O2): 30 min. at 60ºC. Bionova® Ultra Rapid Fluorescence Readout Biological Indicators: BT224 (Steam): 20 min. at 60ºC. Characteristics: 3 metal positions (38 mm deep, 9 mm diameter) to incubate Rapid/Super Rapid/Ultra Rapid Fluorescence Readout Self-contained biological indicators. 1 ampoule crusher. Special hole for external thermometer. Incorporated top cap. Dual Temperature System: Allows selecting between two different incubation temperatures (37ºC and 60ºC) USB connection for registering results in a PC through Reading and Traceability Software. Allows incubating 3 indicators simultaneously, in different incubation times, at the same temperature. Thermal Printer to record results. Sound alarm for event indication Detection and automatic cancellation of the fluorescence reading of the biological indicator. Specifications: Fluorescence Reading Wavelength: ~ 460 nm Firmware Update By The User. Dimensions: 180 mm High, 154 mm wide and 105 mm deep. Voltage Range: 100 €“ 240 V AC Power: 28 W Frequency: 50-60 Hz Operating Specifications: Input 100/240V 0.2A (50/60Hz)|Output: 12V 4A Working Temperature: 37 ± 2°C, 60 ± 2°C More Info About This Product: User Manual

Read more less

Elevated Comfort: MICROFLEX CE5-512 cleanroom gloves are made using a soft latex formulation, offering an ideal blend of comfort and dexterity Enhanced Grip: These disposable latex gloves are also designed with textured fingers, for solid grip performance in various conditions Assured Product Integrity: As these MICROFLEX gloves are free of silicone, they pose a lesser risk to product and component integrity Key Features And Benefits: Soft Latex Formulation: A balance of comfort and dexterity Textured Fingers: Enhanced grip performance Silicone-Free Design: Assured product protection Recommended For: Clean room cleaning and preparing Blending, compounding solids and liquids Spill or leakage cleanup Transferring liquids and solids Loading centrifuges and chromatography columns Assembly of parts Weighing and dispensing of solid and liquid raw materials Primary Industries: Life Sciences Electronics Product Details: Packaging: 10 polybags per 1 master bag; 1 master polybag per case; 100 gloves per double polybag Size Code Packaging XS (5.5 - 6) CE5-512-XS 10 polybags per 1 master bag 1 master polybag per case 100 gloves per double polybag S (6.5 - 7) CE5-512-S M (7.5 - 8) CE5-512-M L (8.5 - 9) CE5-512-L XL (9.5 - 10) CE5-512-XL Downloads: Product Data Sheet

Read more less

Comfortable Fit And Secure Grip: MICROFLEX ComfortGrip CFG-900 are comfortable, powder-free gloves with a fully textured surface to allow wearers in a range of industries to securely grip tools and materials Medical Exam Grade: These disposable latex gloves can be used by healthcare and dental professionals in certain applications as they are medical exam-grade certified Food Handling Compliance: These gloves are also suitable for a wide range of food-handling applications Great Value: Hand protection you can trust at an excellent price point Key Features And Benefits: Versatile: Medical exam grade and suitable for food contact Fully Textured: For a firm grip Great Value: Offering affordable protection Recommended For: All food processing, applications that have food contact Sample taking and processing Extra comfort during long, sustained procedures Standard patient examinations Primary Industries: Food Processing Life Sciences Healthcare Product Details: Packaging: 100 gloves per dispenser10 dispensers per case1000 gloves per case Size Code Packaging XS (5.5 - 6) CFG-900-XS 100 gloves per dispenser 10 dispensers per case 1000 gloves per case S (6.5 - 7) CFG-900-S M (7.5 - 8) CFG-900-M L (8.5 - 9) CFG-900-L XL (9.5 - 10) CFG-900-XL Downloads: Product Data Sheet

Read more less

Enhanced Grip: These synthetic surgical gloves’ textured finish enhances instrument grip, for secure handling in wet environments, especially during high-risk procedures Easy Double Gloving: Best used as an outer glove when double gloving, Ansell’s proprietary donning aid technology includes an inner polymer coating to facilitate donning and doffing during intra-operative changes Optimized Allergenic Prevention: These sterile polyisoprene gloves eliminate the risk of developing a latex allergy and help prevent sensitization to allergic contact dermatitis, as they are not made with chemical accelerators known to be allergens Chemo-Tested: GAMMEX Non-Latex PI Textured gloves are tested for handling with a range of cytotoxic drugs per ASTM D6978 Key Features And Benefits: Textured External Finish: Firm instrument grip in wet or dry conditions Donning Aid Technology: Fast and easy donning and doffing Skin-Friendly, Non-Sensitizing Formulation: Low dermatitis potential Recommended For: All surgeries, especially high-risk procedures in orthopedics, trauma, and cardiac Enhanced grip in wet environments Protection from chemical accelerators such as thiurams, carbamates and mercapto's known to cause chemical Type IV allergies Use as an outer glove when double gloving Having passed the Mouse Embryo Assay (MEA) test may be used for In Vitro Fertilization (IVF) procedures Primary Industries: Healthcare Featured Technologies: Product Details: Packaging: Size Code 5.5 20688255 50 pairs per box; 4 boxes per carton/case; 200 pairs per carton/case 6 20688260 6.5 20688265 7 20688270 7.5 20688275 8 20688280 8.5 20688285 9 20688290 Download: Product Data Sheet Declaration Of Conformity UK Declaration Of Conformity Declaration of Conformity – Regulation (EU) MDR 2017/7450.08 MB (pdf) Product catalog24.05 MB (pdf)

Read more less

Barrier Protection: This non-sterile glove features a thicker cuff and is ideal for healthcare providers in higher-risk clinical settings who require additional barrier protection Comfortable Fit: Ansell's natural rubber latex formulation provides excellent elasticity and memory for a secure, comfortable fit Secure Grip: Textured surface provides sure handling of materials and instruments in wet and dry conditions Added Protection: The extended 12" reinforced cuff offers additional protection to the wearer Key Features And Benefits: Thicker Cuff: For assured barrier protection Textured Surface: Allows for sure handling of instruments Extended 12" Reinforced Cuff: For enhanced protection Recommended For: Extra protection over the wrist and arm Extra comfort during long, sustained procedures Sustained, high-risk examination procedures Primary Industries: Healthcare Product Details: Packaging: 1 pair per pouch 25 pouches per dispenser 4 dispensers per case Size Code Packaging XS (5.5 - 6) 9201 1 pair per pouch; 25 pouches per dispenser; 4 dispensers per case S (6.5 - 7) 9203 M (7.5 - 8) 9205 L (8.5 - 9) 9207

Read more less

Micro-Touch Micro-Thin Nitrile examination gloves feature an advanced stretch formulation providing ultimate comfort and fit With its high strength and excellent protection features, this glove is ideal for use in nearly all clinical settings Featured in a 300-count box This examination glove is made of 100% nitrile; it does not contain natural rubber latex The textured fingertips of the glove provide extra protection for wet or dry grip and promote sure handling of materials and instruments

Read more less

Protective Glove, Neoprene, Powder-Free (PF), Sterile (ST), 50 pr/bg, 4 bg/cs   

Read more less

Reliable chemical splash protection: TouchNTuff 92-675 disposable gloves offer protection against accidental exposure when handling a range of chemicals Improved durability: A strong, proprietary nitrile formulation gives gloves extra resilience for more durable protection in food handling, lab work or heavy-duty jobs Elevated comfort: The soft nitrile formulation enhances comfort during long work days Food handling compliance: These gloves are suitable for a wide range of food processing applications Enhanced grip: Textured fingertips allow wearers to securely handle objects and equipment Recommended For Transferring liquids and solids Sample taking and processing Handling incoming goods Maintenance All food processing, applications that have food contact Primary Industries Life Sciences Chemical Food Processing Key Features And Benefits Chemical splash resistance: For protection from incidental chemical contact Soft, robust nitrile: For everyday durability and comfort Food handling compliance: Suitable for food processing applications   Product Details Packaging 100 gloves per dispenser10 dispensers per case1000 gloves per case Size Code Packaging S (6.5 - 7) 565716 Bulk Pack: 100 gloves per dispenser; 10 dispensers/1000 gloves per case M (7.5 - 8) 565717 L (8.5 - 9) 565718 XL (9.5 - 10) 565719 Downloads Product Data Sheet Declaration Of Conformity UK Declaration Of Confo

Read more less

World leader: TouchNTuff 92-600 gloves are the world's leading disposable gloves for chemical splash protection Superior protection: Made with TNT Chemical Splash Resistance Technology, these gloves effectively safeguard hands from exposure to harmful chemicals Elevated comfort: Super soft nitrile provides a comfortable feel during extended wear Robust durability: Proprietary formulation is extra-strong to prevent tearing during heavy-duty work Prevents surface defects: Silicone-free, they prevent contaminant transfer that causes flaws in paints, coatings and finishes Recommended For Transferring liquids and solids Sample taking and processing Meat, Fish and Food Processing Industrial Production Maintenance Laboratory analysis Chemical Handling Primary Industries Life Sciences Food Processing Automotive Machinery and Equipment Chemical Agriculture Utilities Warehousing Featured Technologies Key Features And Benefits Advanced chemical resistance: With TNT™ Technology for ultimate protection Superior comfort: Extra-soft, smooth feel, boosting comfort for extended wear Outstanding durability: Proprietary nitrile resists rips and tears Product Details Packaging 100 gloves per dispenser10 dispensers per case1000 gloves per case Size Code Packaging S (6.5 - 7) 92600070 100 gloves per dispenser 10 dispensers per case 1000 gloves per case M (7.5 - 8) 92600080 L (8.5 - 9) 92600090 XL (9.5 - 10) 92600100 Downloads Product Data Sheet Declaration Of Conformity Food Declaration of Product Conformity Chemical Recomm

Read more less

mproved durability: TouchNTuff DermaShield 73-701 sterile disposable gloves boast a unique neoprene formulation, resulting in greater durability and puncture resistance Reduced allergy risks: Designed for aseptic environments and free of latex proteins and chemical accelerators, these neoprene gloves prevent the risk of Type I and Type IV allergies and sensitivities Enhanced features: Their beaded cuff, designed with SUREFIT Cuff Roll-Down Technology, prevents cuffs from rolling down, facilitating sustained wear Heightened protection: Beyond robustness, these neoprene gloves offer wearers high levels of chemical splash resistance, protecting hands from various hazards Recommended For Transferring liquids and solids Sample taking and processing Blending, compounding solids and liquids Aseptic filling and labelling Primary Industries Life Sciences Featured Technologies Key Features And Benefits Neoprene formulation: Excellent puncture resistance and durability SUREFIT™ Technology: Lesser risk of cuff roll-down Latex-free, chemical accelerator-free: Type I and Type IV allergy risks eliminated Product Details Packaging 1 pair per inner poly pack; 10 inner poly packs per inner polybag; 5 outer polybags per bag; 4 bagsper master bag; 1 master bag of 200 pairs per carton/case Size Code Packaging 6 73701060 1 pair per inner poly pack; 10 inner poly packs per inner polybag; 5 outer polybags per bag; 4 bags per master bag; 1 master bag of 200 pairs per carton/case 6.5 73701065 7 73701070 7.5 73701075 8 73701080 8.5 73701085 9 73701090 Downloads Product Data Sheet Declaration Of Conformity UK Declaration Of Conformity Chemical Recommendation Guides IFU CE & DI18.26 MB (pdf)

Read more less

Elevated comfort: AlphaTec Solvex 37-175 safety gloves’ cotton flocking absorbs sweat and enhances comfort Augmented dexterity: Their 17 mil/0.46mm thickness ensures high levels of dexterity Specialized protection: A high-performance nitrile compound composition ensures EN 374 Type A chemical resistance Improved durability: The same nitrile make-up makes these AlphaTec gloves more durable than rubber or neoprene alternatives of the same thickness, with EN and ANSI level 4 abrasion resistance Genuine versatility: AlphaTec Solvex 37-175 PPE gloves may be used in both wet and dry conditions, while complying with FDA 21 CFR 177.2600 food handling regulations Recommended For Handling rough machined metal parts Equipment repair & maintenance Painting or cleaning tools or robots Changing tools and dies Handling incoming goods Filling, blending and charging of raw materials Opening and draining pumps valves or lines Loading and unloading of proces equipment Transferring liquids and solids between vessels and tanks and process equipment Supervision of running operation Handling outgoing goods: cans, vessels, bulkpack and cartons Testing Opening furnaces draining pumps valves or lines and crackers BTX process Primary Industries Automotive Machinery and Equipment Chemical Agriculture Automotive Aftermarket Food Processing Oil and gas Utilities Warehousing Key Features And Benefits Cotton flocking: Moisture-absorbent, for greater comfort 17 mil/0.46mm thickness: For comfortable, dexterous safety gloves Nitrile compound composition: EN 374 Type A chemical protection Product Details Packaging 12/polybag; 12 polybags/case Downloads Product Data Sheet Declaration Of Conformity Food Declaration of Product Conformity Chemical Recommendation Guides Glove Size Chart0.07 MB (pdf) Instructions for Use1.19 MB (pdf)

Read more less

ERGOFORM Technology: MICROFLEX Neogard  C52 gloves are designed with proprietary technology to reduce hand fatigue Excellent Wet Grip: This neoprene glove has a "grippy" textured outer finish for good grip in wet or dry environments. Certified by U.S. Ergonomics for wet performance Comfortable Fit And Heightened Sensitivity: Soft and pliable neoprene provides tactile sensitivity & comfort for longer periods Reduced allergy Risk: Made without natural rubber proteins and powder to help protect workers from Type 1 (latex) allergies Recommended For Plant disinfection and sanitization Maintaining lab furniture and equipment Transferring liquids and solids Transferring liquids Loading centrifuges and chromatography columns Assembly of parts Sample taking and processing Blending, compounding solids and liquids Raw material sample collection Enhanced grip in wet environments Extra comfort during long, sustained procedures Damp donning Damp donning Standard, moderate risk examination procedures Protection from Type I latex allergy in HCW's or patients Primary Industries Food Processing Life Sciences Healthcare Utilities Warehousing Key Features And Benefits ERGOFORM Technology: Ergonomic design supports musculoskeletal health Textured outer finish: Certified by U.S. Ergonomics for exceptional wet grip Pliable neoprene material: Provides tactile sensitivity & comfort Product Details Packaging 100 gloves per dispenser10 dispensers per case1000 gloves per case Size Code Packaging XS (5.5 - 6) C520 100 gloves per dispenser 10 dispensers per case 1000 gloves per case S (6.5 - 7) C521 M (7.5 - 8) C522 L (8.5 - 9) C523 XL (9.5 - 10) C524 

Read more less

Specialized Protection: Fentanyl and gastric acid (vomit) tested, for proven performance in real-world overdose scenarios, and EN 374 Type B certified for proven chemical splash protection Dark Black Color: Dirt-masking black color makes potential hazards easier to spot Extended Protection: A longer cuff offers expanded protection of the forearm and wrist Elevated Comfort And Grip: The soft, flexible nitrile composition provides comfort while the textured design ensures a confident grip NFPA Approved: Compliance with NFPA 1999 Emergency Medical Glove Requirements makes them a suitable choice for US first responders Recommended For Administering drugs Equipment, maintenance and repair Extra protection over the wrist and arm Standard patient examinations Overdose situations Emergency services Inspection of parts, equipment Laboratory analysis Paint shop Positioning patients Raw material sample collection Oil, fluids and filter change General Purpose Auto Aftermarket Primary Industries Automotive Automotive Aftermarket Chemical Correctional Facilities Emergency Medical Services Healthcare Law Enforcement Life Sciences Machinery and Equipment Manufacturing Recycling and Waste Disposal Transportation Product Details Key Features And Benefits Specialized protection: Strong chemical splash resistance Black nitrile: Masks dirt and increases visibility of light colored objects NFPA approved: Suitable for US first responders Packaging 100 gloves per dispenser 10 dispensers per case 1000 gloves per case Size Code Packaging S (6.5 - 7) 93862070 100 gloves per dispenser; 10 dispensers per case; 1000 gloves per case M (7.5 - 8) 93862080 L (8.5 - 9) 93862090 XL (9.5 - 10) 93862100 XXL (10.5 - 11) 93862110 

Read more less

Masks Stains: MICROFLEX MidKnight MK-296 exam gloves’ black color disguises dirt while enhancing the visibility of light-colored objects Enhanced Grip: A fully textured, non-foaming design offers these powder- and silicone-free nitrile gloves a superior grip Proven Protection: These medical exam gloves are approved for use against fentanyl and gastric acid (vomit), ensuring they are suitable for hazardous overdose situations Genuine Versatility: These gloves are suitable for various applications, used notably by auto mechanics, maintenance workers, and law enforcement officers Food Handling Compliant: Also ideal for a wide range of food handling applications  Recommended For Inspection, selecting, checking parts General Purpose Auto Aftermarket Use of cleaning tools and robotic equipment Oil, fluids and filter change Engine transmission and repair Tire rotation & changes Maintaining lab furniture and equipment Sample taking and processing Blending, compounding solids and liquids Raw material sample collection Weighing and dispensing of solid and liquid raw materials Inspection (picking, checking and marking) Standard, moderate risk examination procedures Protection from Type I latex allergy in HCW's or patients Primary Industries Automotive Automotive Aftermarket Life Sciences Machinery and Equipment Healthcare Emergency Medical Services Utilities Warehousing Product details Packaging 100 gloves per dispenser 10 dispensers per case 1000 gloves per case Also available in retail packs 10 gloves per pack 50 packs per carton/case Size Code Packaging XS (5.5 - 6) MK-296-XS 100 gloves per dispenser 10 dispensers per case 1000 gloves per case Also available in retail packs: 10 gloves per pack 50 packs per carton/case S (6.5 - 7) MK-296-S M (7.5 - 8) MK-296-M L (8.5 - 9) MK-296-L XL (9.5 - 10) MK-296-XL XXL (10.5 - 11) MK-296-XXL Download Product Data Sheet 

Read more less

Elevated Comfort: These thin, black nitrile medical exam gloves offer enhanced dexterity and tactility in a thin, yet strong design Black Nitrile: Distinctive black color provides contrast while also hiding the appearance of oils, bodily fluids, and other stains ERGOFORM Technology: ERGOFORM Ergonomic Design Technology reduces muscle strain during repetitive tasks, improving worker comfort and productivity Optimized Grip: Textured on the fingertips for secure handling of instruments and materials Key Features And Benefits: Thin Durable Design: Offers strength, dexterity, and tactility Black Nitrile: Hides oils, bodily fluids, and other stains ERGOFORM Technology: Ergonomic design supports musculoskeletal health Recommended For: General dentistry Standard patient examinations Emergency services Catering/Meal preparation General Purpose Auto Aftermarket Equipment repair and maintenance Laboratory analysis Cosmetic Procedures Tattoo Primary Industries: Food Service Cosmetics Tattoo Automotive Aftermarket Chemical Emergency Medical Services Healthcare Law Enforcement Life Sciences Dental Machinery And Equipment Metal Fabrication Featured Technologies: Product Details: Packaging: Case=1000 gloves/10 dispensers; Dispenser=100 gloves 2XL: Case=900 gloves/10 dispensers; Dispenser=90 gloves Size Code Packaging XS (5.5 - 6) 93732060 Case=1000 gloves/10 dispensers; Dispenser=100 gloves 2XL: Case=900 gloves/10 dispensers; Dispenser=90 gloves S (6.5 - 7) 93732070 M (7.5 - 8) 93732080 L (8.5 - 9) 93732090 XL (9.5 - 10) 93732100 XXL (10.5 - 11) 93732110 Downloads: Product Data Sheet Declaration Of Conformity UK Declaration Of Conformity Declaration of Conformity – Regulation (EU) MDR 2017/7450.14 MB (pdf)

Read more less

Reinforced Protection: MICROFLEX Lifestar EC LSE-104 EMS gloves’ dual-layer, dual-color design offers first responders and healthcare workers double-layered hand protection Specialized Resistance: Tested against Fentanyl and gastric acid (vomit) in real-world overdose simulations, these gloves ensure advanced protection for medical professionals Enhanced Grip: These medical gloves’ non-stick/non-foaming properties and textured fingertips ensure confident grip performance, for handling bandages, liquids, medical tape, etc. Certified Performance: Satisfying NFPA 1999 Emergency Medical Glove Requirements and boasting chemical splash resistance certification, these nitrile exam gloves offer wearers proven protection Key Features And Benefits: Dual-Layer, Dual-Color Design: For dual-protection emergency gloves Specialized Protection: Fentanyl and gastric acid (vomit) resistance Non-Stick/Non-Foaming Composition: For a secure, trouble-free grip Recommended For: Administering drugs Inspection, selecting, and checking parts Sample taking and processing Transferring liquids and solids Emergency services Standard patient examinations Overdose situations Primary Industries: Healthcare Emergency Medical Services Product Details: Packaging: 100 gloves per dispenser10 dispensers per case1000 gloves per case*90 gloves per dispenser (Size XXXL) *900 gloves per case (Size XL) Size Code Packaging S (6.5 - 7) LSE-104-S 100 gloves per dispenser 10 dispensers per case 1000 gloves per case *90 gloves per dispenser (SizeXXXL) *900 gloves per case (Size  XXXL) M (7.5 - 8) LSE-104-M L (8.5 - 9) LSE-104-L XL (9.5 - 10) LSE-104-XL XXL (10.5 - 11) LSE-104-2XL XXXL (11.5 - 12) LSE-104-3XL Downloads: Product Data Sheet

Read more less

Elevated Comfort And Tactility: MICROFLEX HSCE4-879 cleanroom gloves’ natural rubber latex formulation and hand-specific design enhance dexterity, tactility and comfort, while minimizing strain Assured Cleanliness: Compliant with ASTM and IEST standards, they are manufactured in a totally integrated facility certified to ISO 9001 specification, for truly reliable cleanroom hand protection Sterility Assurance: These cleanroom gloves are sterilized by gamma irradiation, with a sterility assurance level (SAL) of 10-6 Key Features And Benefits: Natural Rubber Latex Formulation: Superb dexterity, tactility and comfort Hand-Specific Anatomical Design: Reduced strain, better ergonomics Gamma Sterilization: Sterility assurance level (SAL) of 10-6 Recommended For: Transferring liquids and solids Packaging and labeling Transferring liquids Aseptic filling and labelling Primary Industries: Life Sciences Product Details: Packaging: 1 pair per poly wallet; 1 poly wallet per inner polybag; 10 polybags per master polybag; 20 master polybags per carton Downloads: Product Data Sheet

Read more less