Cements, liners & adhesives

MARK3 Dentin Desensitizer is a superior desensitizer that can be placed under dental cements or other restorative materials, temporary, provisional or final. It can be used in all restorative procedures where work in done in dentin. It has been shown to improve bond strength when used as a wetting agent, as compared to water.Does NOT contain Glutaraldehyde, a strong toxic irritant.Compares to: Gluma Desensitizer, Hurriseal and Micro Prime Product Specifications MARK3 Dentin Desensitizer 10ml Can be used for desensitization of amalgam restorations, either conventional or bonded. It helps kill bacteria, alter nerve responses and aids bonding primers in penetrating etched dentin. MARK3 Desensitizer contains benzalkonium chloride, HEMA and fluoride as an added source of fluoride ion. MARK3 Desensitizer is very effective when applied to vital crown preparations prior to luting with Glass Ionomer and Zinc Phosphate cements. It may also be used at the preparatory appointment to desensitize during temporization. Complete desensitization will result in nearly all preparations when Lapiss is used properly in conjunction with these cements. The application of MARK3 Desensitizer reliably reduces post-op sensitivity by supporting the collagen framework for easier penetration of the adhesive, thus enhancing the dentin bond. Most dentin bonding materials such as: All Bond 2, Optibond, Scothbond, etc. will benefit from the application of Lapiss. MARK3 Desensitizer can be used to eliminate post-op sensitivity under standard amalgam restorations. When using MARK3 Desensitizer, minimize contact with soft tissue and rinse well at completion of desensitization procedure. This will reduce the chance of mild soft tissue irritation.

Read more less

A superior zinc phosphate cement containing tannin fluoride and offering high compressive strength. Seals dentinal tubules and minimizes post-operative sensitivity Excellent for seating permanent prostheses Film thickness (25 µm) High compressive strength (98 MPa) High level of radiopacity Apply directly to prepared dentin Neutralizes the harshness of phosphoric acid

Read more less

A superior zinc phosphate cement containing tannin fluoride and offering high compressive strength. Seals dentinal tubules and minimizes post-operative sensitivity Excellent for seating permanent prostheses Film thickness (25 µm) High compressive strength (98 MPa) High level of radiopacity Apply directly to prepared dentin Neutralizes the harshness of phosphoric acid

Read more less

A superior zinc phosphate cement containing tannin fluoride and offering high compressive strength. Seals dentinal tubules and minimizes post-operative sensitivity Excellent for seating permanent prostheses Film thickness (25 µm) High compressive strength (98 MPa) High level of radiopacity Apply directly to prepared dentin Neutralizes the harshness of phosphoric acid

Read more less

Polycarboxylate Powder, 60g

Read more less

Polycarboxylate Liquid, 33ml

Read more less

Developed with SHOFU’s patented HY-Agent additive (tannin-fluoride), HY-Bond Polycaroboxylate cement is indicated specifically for successful cementation of cast restorations and orthodontic appliances. The HY-Agent helps to minimize post-operative sensitivity and increase compressive strength. Features Chemically adheres to tooth structure and cast appliances Exhibits high adhesive strength and low solubility Radiopaque, easy to mix and manipulate with a very low film thickness. Can be placed on freshly cut dentin with no pulpal irritation Less technique sensitive due to the tannin-fluoride additive

Read more less

GlasIonomer Base Cement (Dentin Replacement) A high compressive strength base cement formulated for dentin replacement. Recommended as a supportive, protective base under stress-bearing amalgam, composite and porcelain restorations Compressive strength (147 MPa) High fluoride release reduces the occurrence of secondary caries High level of radiopacity Low solubility Easy mixing and handling Biocompatible and chemically bonds to dentin and enamel Pediatric temporary cusp replacement.

Read more less

A high compressive strength base cement formulated for dentin replacement. Recommended as a supportive, protective base under stress-bearing amalgam, composite and porcelain restorations Compressive strength (147 MPa) High fluoride release reduces the occurrence of secondary caries High level of radiopacity Low solubility Easy mixing and handling Biocompatible and chemically bonds to dentin and enamel Pediatric temporary cusp replacement

Read more less

A high compressive strength base cement formulated for dentin replacement. Recommended as a supportive, protective base under stress-bearing amalgam, composite and porcelain restorations Compressive strength (147 MPa) High fluoride release reduces the occurrence of secondary caries High level of radiopacity Low solubility Easy mixing and handling Biocompatible and chemically bonds to dentin and enamel Pediatric temporary cusp replacement

Read more less

GlasIonomer Base Cement - 5 mL. LiquidGlasIonomer Base Cement is high compressive strength base cement formulated for dentin replacement. GlasIonomer is recommended as a supportive, protective base under stress-bearing amalgam, composite and porcelain restorations.

Read more less

An enhanced glass ionomer luting cement with prolonged working time. High resistance to compression 149 MPa compared with competitive cements Low film thickness, 15 microns optimizing the marginal integrity Radiopacity 1,55 mm Low level of acid erosion 0,02 mm High fluoride release Capsules with 0,53 g Working time 4 minutes and 10 seconds from start of mixing 3 years of shelf life

Read more less

An enhanced glass ionomer luting cement with prolonged working time. High resistance to compression 149 MPa compared with competitive cements Low film thickness, 15 microns optimizing the marginal integrity Radiopacity 1,55 mm Low level of acid erosion 0,02 mm High fluoride release Capsules with 0,53 g Working time 4 minutes and 10 seconds from start of mixing 3 years of shelf life

Read more less

An enhanced glass ionomer luting cement with prolonged working time. High resistance to compression 149 MPa compared with competitive cements Low film thickness, 15 microns optimizing the marginal integrity Radiopacity 1,55 mm Low level of acid erosion 0,02 mm High fluoride release Capsules with 0,53 g Working time 4 minutes and 10 seconds from start of mixing 3 years of shelf life

Read more less

An enhanced glass ionomer luting cement with prolonged working time. High resistance to compression 149 MPa compared with competitive cements Low film thickness, 15 microns optimizing the marginal integrity Radiopacity 1,55 mm Low level of acid erosion 0,02 mm High fluoride release Capsules with 0,53 g Working time 4 minutes and 10 seconds from start of mixing 3 years of shelf life

Read more less

An enhanced glass ionomer luting cement with prolonged working time. High resistance to compression 149 MPa compared with competitive cements Low film thickness, 15 microns optimizing the marginal integrity Radiopacity 1,55 mm Low level of acid erosion 0,02 mm High fluoride release Capsules with 0,53 g Working time 4 minutes and 10 seconds from start of mixing 3 years of shelf life

Read more less

Translucent Kit, Includes: (2) 3.5g Translucent Syringes, (15) Applicator Tips and (2) OneGloss PS Midi Point Polishers MonoCem TRANSLUCENT Kit. Self-Adhesive Resin Cement. 2 - 3.5 Gm. Syringe, 15 Applicator Tips and 2 OneGloss PS Midi-Point Polishers. With Fluoride, Dual Cure.

Read more less

MonoCem Bleach White Kit, Includes: (2) 3.5g Bleach White, (15) Applicator Tips and (2) OneGloss PS Midi-Point Polishers MonoCem BLEACH WHITE Kit. Self-Adhesive Resin Cement. 2 - 3.5 Gm. Syringe, 15 Applicator Tips and 2 OneGloss PS Midi-Point Polishers. With Fluoride, Dual Cure.

Read more less

BeautiCem SA is a self-etch, self-adhesive, dual-cure resin cement incorporating SHOFU’s proprietary “Giomer” filler technology. High bond values across all substrates provide piece-of-mind for all of your cementation needs. A quick two-second flash-cure provides easy marginal clean-up. The low 12 µm film-thickness allows extra space in tight-fit situations and nearly undetectable margins. The addition of Giomer technology offers well-documented bioactive properties serving to remineralize and protect tooth structure. Self-etching, self-adhesive resin cement No primer required for all substrates (except porcelain) Auto-mixing syringe eliminates hand mixing Dual cure for easy cleanup High Radiopacity Low film thickness (12 μm)

Read more less

BeautiCem SA is a self-etch, self-adhesive, dual-cure resin cement incorporating SHOFU’s proprietary “Giomer” filler technology. High bond values across all substrates provide piece-of-mind for all of your cementation needs. A quick two-second flash-cure provides easy marginal clean-up. The low 12 µm film-thickness allows extra space in tight-fit situations and nearly undetectable margins. The addition of Giomer technology offers well-documented bioactive properties serving to remineralize and protect tooth structure. Self-etching, self-adhesive resin cement No primer required for all substrates (except porcelain) Auto-mixing syringe eliminates hand mixing Dual cure for easy cleanup High Radiopacity Low film thickness (12 μm)

Read more less

MARK3's Polycem is a Polycarboxylate Luting Cement used primarily for the final cementation of crowns and bridges. has great biocompatibility and a low film thickness of 13-18 microns. It's neutral PH formula makes it the cement of choice for sensitive tooth preparations close to the pulp.Indications: Cementing of crowns and bridges, and inlays/onlays and orthodontics appliances. Can be used as a cavity liningContains: (1) 60g Powder, (1) 40ml Liquid, (1) Scoop and (1) Mixing PadCompare to Durelon Product Specifications MARK3® PolyCem Polycarboxylate Cement Powder & Liquid Kit  Strong insulation properties Perfect for cementation of crowns and bridges, and inlays/onlays and orthodontics appliances Chemical bond of tooth structure and metal Low film thickness, 13-18 microns Biocompatible, reduces pulpal reaction Neutral PH, ideal for sensitive teeth

Read more less

Temporary Cement NE Automix from MARK3 is a non-eugenol temporary crown and bridge cement suitable for cementing temporary crowns or bridges as well as for trial cementing of permanent restorations.Contains - 2x5ml (8.6gm) Syringes plus 20 mix tipsCompares to: Tempbond Automix NE Product Specifications MARK3 Temporary Cement NE Automix 2/pk  Excellent adhesion but easily removable Easy to use Automix syringes Non-Eugenol formulation does not influence setting of resin-based fillings and    luting materials Good for those allergic to Eugenol Based on ZnO/organic acids (Zinc oxide cement)

Read more less

MARK3 Clear Temporary Cement is a temporary zinc oxide non-eugenol luting cement for trial cementing restorations or cementing temporary crowns and bridges. A perfect choice for esthetic dentistry. Easy and direct application with Automix delivery system. Optimal adhesion and residue free removal from the tooth stump.Contains: (1) 5ml, 8.6gm syringe & 10 mix tipsCompares to: Tempbond Automix NE Product Specifications MARK3 Temporary Cement Clear NE Automix Syringe 5ml   Excellent fit but easily removable  Easy and direct application with Automix syringes  Optimal adhesion and residue-free removal from the tooth stump (residue stays in      the crown)  Good for those allergic to Eugenol  Based on ZnO/organic acids (Zinc Oxide Cement)  

Read more less

EverCem From MARK3 is a versatile dual cure, self etch, self adhesive resin cement in an 8gm automix dual barrel syringe. It is used for cementing indirect restorations made from ceramic, composite, and metal, as well as cementing posts. It's low film thickness ensures a closer fit of the restoration while providing excelling bonding values.Indications: indirect restorations such as, inlays, onlays, crowns, bridges, endodontic posts, zirconia crowns, implants, aluminum oxide ceramic & fiber reinforced composite posts. Contains: (1) 8gm Automix Syringe & 6 mixing tips Product Specifications MARK3 EverCem Dual Cure Resin Cement Automix Dual Cure - more versatile no need for etching or bonding easy cleanup of excess material low film thickness ensuring a closer fit to the restoration Radiopaque Automix Delivery System

Read more less

Base-Fil Reinforced Z.O.E. Cement from MARK3 is a polymer reinforced zinc oxide eugenol material good for temporary fillings or as a base.Contains:1x 50g Powder, 1x15ml Liquid 1 scoop and 1 dropperCompares to: IRM by Dentsply Caulk Product Specifications  MARK3 Base-Fil Reinforced Z.O.E. Cement (IRM) 50gm • Polymer reinforced zinc oxide/eugenol material good for temporary fillings or as a base• Sedative qualities on hypersensitive pulp• Abrasion resistant with good sealing properties• Excellent adhesion and easily removed• 37 MPa compressive strength  

Read more less